Hydrogen Fuel Cell Laboratory, Hydrogen Energy Institute, Korea Institute of Energy Research, 152 Gajeong-ro, Yuseong-gu, Daejeon 34129, Republic of Korea
Auto-generated profile, based on publicly available information
Hye-Sung Kim
Hydrogen Fuel Cell Laboratory, Hydrogen Energy Institute, Korea Institute of Energy Research, 152 Gajeong-ro, Yuseong-gu, Daejeon 34129, Republic of Korea
Since two major criteria for melting were proposed by Lindemann and Born in the early 1900s, many simulations and observations have been carried out to elucidate the premelting phenomena largely at the crystal surfaces and grain boundaries below the bulk melting point. Although dislocations and clusters of vacancies and interstitials were predicted as possible origins to trigger the melting, experimental direct observations demonstrating the correlation of premelting with lattice defects inside a crystal remain elusive. Using atomic-column-resolved imaging with scanning transmission electron microscopy in polycrystalline BaCeO3, here we clarify the initiation of melting at two-dimensional faults inside the crystals below the melting temperature. In particular, melting in a layer-by-layer manner rather than random nucleation at the early stage was identified as a notable finding. Emphasizing the value of direct atomistic observation, our study suggests that lattice defects inside crystals should not be overlooked as preferential nucleation sites for phase transformation including melting.
Since the high configurational entropy-driven structural stability of a multicomponent oxide system was proposed by Rost et al. in 2015, many experiments and simulations have been done to develop new multicomponent oxides.
Solid oxide electrolysis cell (SOEC) systems operating at high current densities (HCD) are emerging as sustainable and efficient solutions for hydrogen production. However, the performance of the HCD SOEC systems in endothermic mode, which requires significant external energy, is underexplored. Existing studies often lack comprehensive exergy analyses and effective energy management strategies. Accordingly, this study bridges these gaps by developing a 10 kW HCD SOEC system using Aspen HYSYS software and analyzing five different cases with varying fuel composition, external steam utilization, and fuel recirculation. The cases were systematically evaluated using energy and exergy models to assess their potential and operational possibilities in endothermic mode. Simulation results indicated that all designed cases achieved a hydrogen production rate of 0.076 g s−1. Systems without external steam and recirculation exhibited low overall performance. However, integrating external steam and recirculation strategies significantly boosted the overall performance (Case 5 (E‐DR)), achieving the highest lower heating value LHV‐based overall energy and exergy efficiencies of 78.2% and 77.6%, respectively, making it the best configuration under HCD endothermic conditions. In‐depth exergy analysis revealed that the SOEC stack and fuel superheater (FS) units experienced the highest energy dissipation in all cases and presented the highest improvement potential. Additionally, parametric analysis showed that Case 5 (E‐DR) outperformed all other designed cases when operating with higher external steam temperature, external steam factor, and a recirculation ratio of 0.5. This case maintained superior performance up to 54% steam utilization. Beyond this point, the external steam‐supported system without recirculation (Case 3 (NRE‐H)) exhibited superior performance, thus offering a simpler design by eliminating the need for recirculation. Overall, these insights pave the way for the advancements in SOEC technology under HCD endothermic conditions.