1 December 2004 in SPE Journal
Summary: We used optimal control theory as an optimization algorithm for the valve settings in smart wells. We focused on their use in injectors and producers for the waterflooding of heterogeneous reservoirs. As a followup to an earlier intuitive optimization approach, a systematic dynamic optimization approach based on optimal control theory was developed. The objective was to maximize recovery or net present value of the waterflooding process over a given time period. We investigated the scope for optimization under purely pressure- and purely rate-constrained operating conditions, and concluded that: (1) for wells operating on bottomhole-pressure constraints, the benefit of using smart wells is mainly reduced water production rather than increased oil production, and (2) for wells operating on rate constraints, there is generally a large scope for accelerating production and increasing recovery, in combination with a drastic reduction in water production.
1 March 2009 in SPE Journal
Summary: Dynamic optimization of waterflooding using optimal control theory has significant potential to increase ultimate recovery, as has been shown in various studies. However, optimal control strategies often lack robustness to geological uncertainties. We present an approach to reduce the effect of geological uncertainties in the field-development phase known as robust optimization (RO). RO uses a set of realizations that reflect the range of possible geological structures honoring the statistics of the geological uncertainties. In our study, we used 100 realizations of a 3D reservoir in a fluvial depositional environment with known main-flow direction. We optimized the rates of the eight injection and four production wells over the life of the reservoir, with the objective to maximize the average net present value (NPV). We used a gradient-based optimization method in which the gradients are obtained with an adjoint formulation. We compared the results of the RO procedure to two alternative approaches: a nominal-optimization (NO) and a reactive-control approach. In the reactive approach, each production well is shut in when production is no longer profitable. The NO procedure is based on a single realization. In our study, the NO procedure is performed on each of the 100 realizations in the set individually, resulting in 100 different NO-production strategies. The control strategies were applied to each realization, from which the average NPVs, the standard deviation, the cumulative-distribution functions, and the probability-density functions were determined. The RO results displayed a much smaller variance than the alternatives, indicating an increased robustness to geological uncertainty. Moreover, the RO procedure significantly improved the expected NPV compared to the alternative methods (on average 9.5% higher than using reactive-control and 5.9% higher than the average of the NO strategies).
1 January 1995 in Journal of Sound and Vibration
24 November 2014 in Geoscience Data Journal
The ‘Egg Model’ is a synthetic reservoir model consisting of an ensemble of 101 relatively small three‐dimensional realizations of a channelized oil reservoir produced under water flooding conditions with eight water injectors and four oil producers. It has been used in numerous publications to demonstrate a variety of aspects related to computer‐assisted flooding optimization and history matching. Unfortunately the details of the parameter settings are not always identical and not always fully documented in several of these publications. We present a ‘standard version’ of the Egg Model which is meant to serve as a test case in future publications, and a dataset of 100 permeability realizations in addition to the permeability field used for the standard model. We implemented and tested the model in four reservoir simulators: Dynamo/Mores (Shell), Eclipse (Schlumberger), AD‐GPRS (Stanford University) and MRST (Sintef), which produced near‐identical output. This article describes the input parameters of the standard model. Together with the input files for the various simulators, it has been be uploaded in the 3TU.Datacentrum repository with free access to external users.
1 July 2011 in Computers & Fluids
5 October 2016 in International Journal for Numerical Methods in Engineering
RFRahul Rahul‐Mark Fonseca
Summary: We consider a technique to estimate an approximate gradient using an ensemble of randomly chosen control vectors, known as Ensemble Optimization (EnOpt) in the oil and gas reservoir simulation community. In particular, we address how to obtain accurate approximate gradients when the underlying numerical models contain uncertain parameters because of geological uncertainties. In that case, ‘robust optimization’ is performed by optimizing the expected value of the objective function over an ensemble of geological models. In earlier publications, based on the pioneering work of Chenet al. (2009), it has been suggested that a straightforward one‐to‐one combination of random control vectors and random geological models is capable of generating sufficiently accurate approximate gradients. However, this form of EnOpt does not always yield satisfactory results. In a recent article, Fonsecaet al. (2015) formulate a modified EnOpt algorithm, referred to here as a Stochastic Simplex Approximate Gradient (StoSAG; in earlier publications referred to as ‘modified robust EnOpt’) and show, via computational experiments, that StoSAG generally yields significantly better gradient approximations than the standard EnOpt algorithm. Here, we provide theoretical arguments to show why StoSAG is superior to EnOpt. © 2016 The Authors.International Journal for Numerical Methods in EngineeringPublished by John Wiley & Sons, Ltd.