30 September 2016 in ACS Nano
20 February 2018 in Nano Letters
Platinum diselenide (PtSe2) is a group-10 transition metal dichalcogenide (TMD) that has unique electronic properties, in particular a semimetal-to-metal transition when going from bulk to monolayer form. We report on vertical hybrid Schottky barrier diodes (SBDs) of two-dimensional (2D) PtSe2 thin films on crystalline n-type silicon. The diodes have been fabricated by transferring large-scale layered PtSe2 films, synthesized by thermally assisted conversion at back-end-of-the-line CMOS compatible temperatures of pre-deposited Pt films. The diodes exhibit good rectifying behavior with a clear photoresponse under illumination. Spectral response analysis reveals a considerable responsivity of the SBDs due to photon-induced charge carriers in the silicon region. In addition, we demonstrate that PtSe2 can be utilized as an absorber of infrared light with tunable sensitivity. The results of our study indicate that PtSe2 is a promising option for the development of infrared absorbers and detectors for optoelectronics applications, in particular given its good stability and low temperature processing options.
15 October 2018 in ACS Photonics
Graphene / silicon (G/Si) heterostructures have been studied extensively in the past years for applications as photodiodes, photodetectors and solar cells, with a growing focus on efficiency and performance. Here, a specific contact pattern scheme with interdigitated Schottky and graphene/insulator/silicon (GIS) structures is explored to experimentally demonstrate highly sensitive G/Si photodiodes. With the proposed design, an external quantum efficiency (EQE) of > 80% is achieved for wavelengths ranging from 380 to 930 nm. A maximum EQE of 98% is observed at 850 nm, where the responsivity peaks to 635 mA/W, surpassing conventional Si p-n photodiodes. This efficiency is attributed to the highly effective collection of charge carriers photogenerated in Si under the GIS parts of the diodes. The experimental data is supported by numerical simulations of the diodes. Based on these results, a definition for the ‘true’ active area in G/Si photodiodes is proposed, which may serve towards standardization of G/Si based optoelectronic devices.
26 June 2014 in Scientific Reports
We investigate a vertically-stacked hybrid photodiode consisting of a thin n-type molybdenum disulfide (MoS2) layer transferred onto p-type silicon. The fabrication is scalable as the MoS2 is grown by a controlled and tunable vapor phase sulfurization process. The obtained large-scale p-n heterojunction diodes exhibit notable photoconductivity which can be tuned by modifying the thickness of the MoS2 layer. The diodes have a broad spectral response due to direct and indirect band transitions of the nanoscale MoS2. Further, we observe a blue-shift of the spectral response into the visible range. The results are a significant step towards scalable fabrication of vertical devices from two-dimensional materials and constitute a new paradigm for materials engineering.
8 June 2017 in ACS Photonics
FRFrancisco Javier Garcia Ruiz
Francisco Javier Garcia Ruiz
+2
Graphene/silicon (G/Si) heterojunction based devices have been demonstrated as high responsivity photodetectors that are potentially compatible with semiconductor technology. Such G/Si Schottky junction diodes are typically in parallel with gated G/silicon dioxide (SiO2)/Si areas, where the graphene is contacted. Here, we utilize scanning photocurrent measurements to investigate the spatial distribution and explain the physical origin of photocurrent generation in these devices. We observe distinctly higher photocurrents underneath the isolating region of graphene on SiO2 adjacent to the Schottky junction of G/Si. A certain threshold voltage (VT) is required before this can be observed, and its origins are similar to that of the threshold voltage in metal oxide semiconductor field effect transistors. A physical model serves to explain the large photocurrents underneath SiO2 by the formation of an inversion layer in Si. Our findings contribute to a basic understanding of graphene/semiconductor hybrid devices which, in turn, can help in designing efficient optoelectronic devices and systems based on such 2D/3D heterojunctions.
1 January 2016 in Solid-State Electronics