Geraniaceae seeds represent a role model in soft robotics thanks to their ability to move autonomously across and into the soil driven by humidity changes. The secret behind their mobility and adaptivity is embodied in the hierarchical structures and anatomical features of the biological hygroscopic tissues, geometrically designed to be selectively responsive to environmental humidity. Following a bioinspired approach, the internal structure and biomechanics of Pelargonium appendiculatum (L.f.) Willd seeds are investigated to develop a model for the design of a soft robot. The authors exploit the re‐shaping ability of 4D printed materials to fabricate a seed‐like soft robot, according to the natural specifications and model, and using biodegradable and hygroscopic polymers. The robot mimics the movement and performances of the natural seed, reaching a torque value of ≈30 µN m, an extensional force of ≈2.5 mN and it is capable to lift ≈100 times its own weight. Driven by environmental humidity changes, the artificial seed is able to explore a sample soil, adapting its morphology to interact with soil roughness and cracks.
Combined photothermal‐hygroscopic effects enable novel materials actuation strategies based on renewable and sustainable energy sources such as sunlight. Plasmonic nanoparticles have gained considerable interest as photothermal agents, however, the employment in sunlight‐driven photothermal‐hygroscopic actuators is still bounded, mainly due to the limited absorbance once integrated into nanocomposite actuators and the restricted plasmonic peaks amplitude (compared to the solar spectrum). Herein, the design and fabrication of an AgNPs‐based plasmonic photothermal‐hygroscopic actuator integrated with printed cellulose tracks are reported (bioinspired to Geraniaceae seeds structures). The nanocomposite is actuated by sunlight power density (i.e., 1 Sun = 100 mW cm−2). The plasmonic AgNPs are in situ synthesized on the PDMS surface through a one‐step and efficient fluoride‐assisted synthesis (surface coverage ≈40%). The nanocomposite has a broadband absorbance in the VIS range (>1) and a Photothermal Conversion Efficiency ≈40%. The actuator is designed exploiting a mechanical model that predicted the curvature and forces, featuring a ≈6.8 ± 0.3 s response time, associated with a ≈43% change in curvature and a 0.76 ± 0.02 mN force under 1 Sun irradiation. The plasmonic nanocomposite actuator can be used for multiple tasks, as hinted through illustrative soft robotics demonstrators, thus fostering a bioinspired approach to developing embodied energy systems driven by sunlight.
Nowadays, energy-related issues are of paramount importance. Every energy transformation process results in the production of waste heat that can be harvested and reused, representing an ecological and economic opportunity. Waste heat to power (WHP) is the process of converting the waste heat into electricity. A novel approach is proposed based on the employment of liquid nano colloids. In this work, the triboelectric characterization of TiO2 nanoparticles dispersed in pure water and flowing in a fluorinated ethylene propylene (FEP) pipe was conducted. The idea is to exploit the waste heat to generate the motion of colloidal TiO2 through a FEP pipe. By placing an Al ring electrode in contact with the pipe, it was possible to accumulate electrostatic charges due to the triboelectric effect between the fluid and the inner pipe walls. A peristaltic pump was used to drive and control the flow in order to evaluate the performances in a broad fluid dynamic spectrum. The system generated as output relatively high voltages and low currents, resulting in extracted power ranging between 0.4 and 0.6 nW. By comparing the power of pressure loss due to friction with the extracted power, the electro-kinetic efficiency was estimated to be 20%.
We present a thorough analysis of the field emission properties of three varieties of vertically aligned carbon nanotubes (VA-CNTs), characterized by different morphologies as a consequence of different post-growth plasma etching treatments. Following the Fowler–Nordheim theory on field emission, we have determined the field enhancement factor β of the samples thanks to a precise measurement of their work function through ultraviolet photoemission spectroscopy, and through the study of the emitted electron current at a temperature of T = 2.8 K. We find that plasma etching has the effect of significantly increasing the β of the samples, reaching a high value of β = (15.2 ± 2.5) × 103 for the sample treated with the strongest etching. We have furthermore studied the morphology of the samples with an atomic force microscope (AFM), and measured the mean radius of curvature of the emitting tips, rc. We have found a relationship of the form β(rc) = k/rc, with k = (175 ± 13) μm, which allows prediction of the field-emission properties of a VA-CNT sample through a simple AFM scan.
The combined effects of thermo-sensitive and photothermal materials present novel actuation strategies for wireless application and the use of sustainable energy sources, such as the sunlight. To understand the operating features of multifunctional materials, bioinspired multi-layer actuators represent a simple solution as a testing platform. Here, we report the fabrication of a bilayer photothermal and biodegradable bending actuator, based on thermal expansion of polycaprolactone-lignin blend, 3D printed on cellulose acetate substrate. When the actuator is irradiated with 300 mW/cm2 of simulated solar irradiance, it shows a change in curvature of 25.34%, with a bending moment of ~80.2 µN · m and with a characteristic actuation time of 30 s. Moreover, the photothermal blend shows a conversion efficiency of 13.5%. Due to the photothermal and biodegradability properties, the actuator could be used as a battery-free tool for different tasks, in a scenario where no contamination of the environment is required.