State Key Laboratory of Fluid Power & Mechatronic System, Key Laboratory of Soft Machines and Smart Devices of Zhejiang Province, Center for X-Mechanics, Department of Engineering Mechanics, Zhejiang University, Hangzhou 310027, China
Auto-generated profile, based on publicly available information
Binhong Liu
State Key Laboratory of Fluid Power & Mechatronic System, Key Laboratory of Soft Machines and Smart Devices of Zhejiang Province, Center for X-Mechanics, Department of Engineering Mechanics, Zhejiang University, Hangzhou 310027, China
Soft materials fail by crack propagation under external loads. While fracture toughness of a soft material can be enhanced by orders of magnitude, its fatigue threshold remains insusceptible. In this work, we demonstrate a crack tip softening (CTS) concept to simultaneously improve the toughness and threshold of a single polymeric network. Polyacrylamide hydrogels have been selected as a model material. The polymer network is cured by two kinds of crosslinkers: a normal crosslinker and a light-degradable crosslinker. We characterize the pristine sample and light-treated sample by shear modulus, fracture toughness, fatigue threshold, and fractocohesive length. Notably, we apply light at the crack tip of a sample so that the light-sensitive crosslinkers degrade, resulting in a CTS sample with a softer and elastic crack tip. The pristine sample has a fracture toughness of 748.3 ± 15.19 J/m2and a fatigue threshold of 9.3 J/m2. By comparison, the CTS sample has a fracture toughness of 2,774.6 ± 127.14 J/m2and a fatigue threshold of 33.8 J/m2. Both fracture toughness and fatigue threshold have been enhanced by about four times. We attribute this simultaneous enhancement to stress de-concentration and elastic shielding at the crack tip. Different from the “fiber/matrix composite” concept and the “crystallization at the crack tip” concept, the CTS concept in the present work provides another option to simultaneously enhance the toughness and threshold, which improves the reliability of soft devices during applications.
A growing number of dielectric elastomer actuators have been proposed to build soft robots and soft electronic devices. However, it remains a big challenge to design soft bistable actuators. Most of existing bistable actuators based on soft materials generate either limited actuation range or unrepeatable actuation. In this article, we present a new bistable rotating mechanism using dielectric elastomer actuators, which exhibits a relatively large actuation angle range and repeatable motion. The mechanism is featured by an antagonistic structure with mechanical locks to create two symmetric stable configurations. We develop an analytical model to help design and explain the electromechanical behavior of the bistable rotating mechanism. Powered by the dielectric elastomer actuators, it shows fast response and large load capability. We build a binary manipulator to further demonstrate that the bistable rotating mechanism can provide a promising route for the design of binary systems.
16 September 2025 in Materials Science and Engineering: R: Reports