9 July 2018 in npj Clean Water
In order to address the increasing demand for fresh water due to accelerated social and economic growth in the world, water treatment technologies, such as desalination, have been rapidly developed in attempts to safeguard water security. Electromembrane desalination processes, such as electrodialysis and membrane capacitive deionization, belong to a category of desalination technologies, which involve the removal of ions from ionic solutions with the use of electrically charged membranes termed ion exchange membranes. The challenges associated with ion exchange membranes have drawn the attention of many researchers, who have investigated various approaches to enhance their properties. The incorporation of nanomaterials is one of the popular approaches employed. Much research on nanomaterials incorporated ion exchange membranes was conducted for the purpose of fuel cell applications rather than electromembrane desalination. This review reports on the advances in nanomaterials incorporated ion exchange membranes applicable to desalination. The nanomaterials employed in ion exchange membranes fabrication include carbon nanotubes, graphene-based nanomaterials, silica, titanium (IV) oxide, aluminum oxide, zeolite, iron (II, III) oxide, zinc oxide, and silver. The aims of this article are to provide a snap shot of the current status of nanomaterials incorporation in ion exchange membranes, to assess the status of nanomaterials-facilitated ion exchange membranes research for electromembrane desalination, and to stimulate progress in this area.
8 November 2018 in Journal of Materials Chemistry A
Mechanically robust and highly permselective anion exchange membranes (AEMs) were prepared based on a graphene oxide (GO) and polybenzimidazolium nanocomposite. GO was modified via diazonium chemistry for better dispersibility and used to fabricate unsupported, nanocomposite, dense, flat sheet AEMs with different GO loadings. A fabrication route using post-casting methylation was developed to avoid GO aggregation induced by the anion exchange polymer. The even GO distribution in the membranes was mapped by energy dispersive spectroscopy (EDS) and wavelength dispersive spectroscopy (WDS). Tensile testing and nanoindentation showed that the AEMs had great mechanical strength indicated by their high ultimate tensile strength and hardness. Furthermore, the AEMs exhibited high ion exchange capacity (1.7–2.1 mmol g−1), good to exceptional permselectivity (up to 0.99) and relatively low area resistance (down to 2.9 Ω cm2). A trade-off between good selectivity and low resistance was investigated for membranes with low GO loadings (0.25–2.5%). The GO nanocomposite AEMs demonstrated excellent potential for electrodialysis.
21 November 2017 in ACS Nano
5 August 2022 in Environmental Technology & Innovation
28 June 2017 in ACS Applied Materials & Interfaces
13 July 2024 in npj Clean Water
This study synthesized three MoS₂ morphologies—nanospheres, nanoplatelets, and nanosheets—under varied conditions and incorporated them into chitosan membranes. TEM confirmed unique morphologies and crystallinity. Clean water flux showed that the nanoplatelet (P-CM) membrane had the highest flux due to higher porosity. The P-CM membrane excelled in removing Mn²⁺ and Zn²⁺ ions, achieving 93.0 ± 0.5% and 90.4 ± 1.5% removal, outperforming membranes with nanospheres (S-CM) and nanosheets (T-CM). Its superior performance is attributed to thicker nanoplatelets forming more water channels. The MoS₂‘s tri-layered structure generated reactive oxygen species (ROS) via H₂O₂ catalysis, contributing to enhanced heavy metal removal. These adsorptive-catalytic membranes combine adsorption with catalytic decomposition of heavy metals, highlighting the work’s novelty and superior performance. The membranes demonstrated excellent flux recovery and reusability (96.0 ± 0.5% for P-CM) after chemical cleaning. The findings emphasize the impact of nanomaterial morphologies on membrane performance in water treatment and environmental remediation.