Valentin Petrescu

Valentin Petrescu

Auto-generated profile, based on publicly available information

Valentin Petrescu

Faculty of Engineering, Lucian Blaga University of Sibiu, 550024 Sibiu, Romania

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 August 2020 in Polymers
Verified
Journal Article
Open access
PDF file
Dan DobrotaDan Dobrota
Dan Dobrota
VPValentin Petrescu
Valentin Petrescu
CDCristinel Sabin Dimulescu
Cristinel Sabin Dimulescu
MOMihaela Oleksik
Mihaela Oleksik
An important problem that arises at present refers to the increase in performances in the exploitation of the conveyor belts. Additionally, it is pursued to use some materials, which can be obtained by recycling rubber and PVC waste, in their structure. Thus, the research aimed at creating conveyor belts using materials obtained from the recycling of rubber and PVC waste. Under these conditions, conveyor belts were made that had in their structure two types of rubber and PVC, which was obtained by adding in certain proportions of reclaimed rubber and powder obtained from grinding rubber waste. In order to study the effect of adding PVC on properties, four types of conveyor belts were made, with the structure of rubber, PVC and textile reinforcement. These have been subjected to certain mechanical tests, also being analyzed from the point of view of the behavior of the accelerated aging. The results obtained showed that the addition of PVC lead to a decrease in tensile stress for the strips made, but also an increase in the tensile strain. Additionally, the elasticity tests performed before and after the accelerated aging showed that the presence of PVC in the structure of the conveyor belts determined a substantial reduction of the aging process of the rubber in the conveyor belts. Under these conditions, it has been established that the use of PVC in the structure of rubber matrix conveyor belts is beneficial if conveyor belts are to be produced that are less subject to mechanical stress, but that work in conditions that can cause accelerated aging of materials. An analysis with the finite element method (FEM) of the test samples was also performed.

30 September 2021 in Materials
Verified
Journal Article
Open access
PDF file
MOMihaela Oleksik
Mihaela Oleksik
Dan DobrotaDan Dobrota
Dan Dobrota
MTMădălin Tomescu
Mădălin Tomescu
VPValentin Petrescu
Valentin Petrescu
Machining processes through cutting are accompanied by dynamic phenomena that influence the quality of the processed surfaces. Thus, this research aimed to design, make, and use a tool with optimal functional geometry, which allowed a reduction of the dynamic phenomena that occur in the cutting process. In order to carry out the research, the process of cutting by front turning with transversal advance was taken into account. Additionally, semi-finished products with a diameter of Ø = 150 mm made of C45 steel were chosen for processing (1.0503). The manufacturing processes were performed with the help of two tools: a cutting tool, the classic construction version, and another that was the improved construction version. In the first stage of the research, an analysis was made of the vibrations that appear in the cutting process when using the two types of tools. Vibration analysis considered the following: use of the Fast Fourier Transform (FFT) method, application of the Short-Time Fourier-Transformation (STFT) method, and observation of the acceleration of vibrations recorded during processing. After the vibration analysis, the roughness of the surfaces was measured and the parameter Ra was taken into account, but a series of diagrams were also drawn regarding the curved profiles, filtered profiles, and Abbott–Firestone curve. The research showed that use of the tool that is the improved constructive variant allows accentuated reduction of vibrations correlated with an improvement of the quality of the processed surfaces.

20 December 2017 in Balkan Region Conference on Engineering and Business Education
Verified
Journal Article
Open access
PDF file
Gabriela DobrotaGabriela Dobrota
Gabriela Dobrota
Dan DobrotaDan Dobrota
Dan Dobrota
VPValentin Petrescu
Valentin Petrescu
Circular economy is one of the fundamental pillars of sustainable development. The limited character of resources, the demographic explosion, the urban agglomerations and the high volume of waste have become extremely sensitive issues in the current period. As a result, the implementation of policies based on fundamental objectives such as material recycling, energy consumption from renewable sources and the design of products that meet the recycling and re-use requirements must be a priority for the worldwide. The paper aims to highlight the principles underpinning the circular economy and to identify the challenges faced by important areas in terms of the capacity to ensure their respecting, so as to achieve a real process of sustainable development Also, a descriptive analysis of the situation of the circular economy indicators for the period 2000 - 2015, at the level of the EU28 and of some member countries is carried out. The findings from the study demonstrate the need for a complex waste management process and the implementation of clear action lines to change the current economy model, based on consumption and elimination, with another, based on rational consumption and re-use, amid on improvements of the technologies of the industrial field and in the implementation of business stimulus strategies. As a result, it is necessary to change the mentality of the business environment in order to ensure a healthy socio-economic development, even if the short-term profits are lower.

31 July 2018 in MATEC Web of Conferences
Verified
Journal Article
Open access
AFAlina Maria (Gligor) Fălădău
Alina Maria (Gligor) Fălădău
VPValentin Petrescu
Valentin Petrescu
Compressor stations are important components within natural gas transportation networks. The current paper analyses some of the safety aspects involved in the operation of such facilities – on the one hand related to the explosion risk for employees working in compressor stations and on the other hand related to determining to the areas with increased explosion hazard in such a station, in order to help reducing work-related accidents and the occurrence of professional illnesses. The explosion risk is determined based on a method devised by the National Institute for Research and Development for Environmental Protection Bucharest, while the explosion hazard areas are determined and displayed with the help of the software package AutoCAD Plant 3D.

3 November 2019 in Materials
Verified
Journal Article
Open access
PDF file
Dan DobrotaDan Dobrota
Dan Dobrota
VPValentin Petrescu
Valentin Petrescu
Conveyor belts of special importance must have superior mechanical characteristics. The joining by vulcanization of the conveyor belts allows to obtain superior performances, but it has been found that at the vulcanizing joint of the conveyor belts, there is a “bell”-type defect. This type of defect can cause the quick removal of the conveyor belts from use; thus, within this paper, we realized the constructive optimization of vulcanization installations using the finite element method (FEM). Thus, the FEM analysis was performed for the installation used at the present time, which has four spacers for stiffening, moving to the next stage to a stiffening system with seven spacers and, in the last stage, it was proposed to use a stiffening plate. The joined conveyor belts were of type ST 2000, and by the constructive optimization of the vulcanizing press type DSLQ, the bell-type defect was greatly reduced. Also, an analysis of the effects that the constructive optimization of the vulcanization installation has on the resistance to extraction of the metallic insert from the rubber matrix of the costs determined by the proposed constructive modifications, has been performed.

10 February 2018 in Materials
Verified
Journal Article
Open access
PDF file
Dan DobrotaDan Dobrota
Dan Dobrota
VPValentin Petrescu
Valentin Petrescu
Addressing the problem of reconditioning large parts is of particular importance, due to their value and to the fact that the technologies for their reconditioning are very complex. The tools used to refine regenerated rubber which measure 660 mm in diameter and 2130 mm in length suffer from a rather fast dimensional wear. Within this research, the authors looked for a welding reconditioning procedure that would allow a very good adhesion between the deposited material layer and the base material. In this regard, the MAG (Metal Active Gas) welding process was used, but the ultrasonic activation of the welding process was also considered. Thus, the wire used for welding was activated considering a variation of the frequency of ultrasounds in the range f = 18–22 kHz respectively of the oscillation amplitude A = 30–60 μm. Under these conditions it was found that the presence of ultrasonic waves during the welding cladding process results in uniform deposition of hard carbons at the grain boundary and in the elimination of any existing oxides on the deposition surface, but at the same time increases the adhesion between the base material and the additional material, all of which positively influence the wear and corrosion resistance of the tools used to refine the regenerated rubber.