A method of optical fiber composite overhead ground wire (OPGW) positioning based on a Brillouin distributed optical fiber sensor and machine learning is proposed. A distributed Brillouin optical time-domain reflectometry (BOTDR) and Brillouin optical time-domain analyzer (BOTDA) are designed, where the ranges of BOTDR and the BOTDA are 110 km and 125 km, respectively. An unsupervised machine learning method density-based spatial clustering of applications with noise (DBSCAN) is proposed to automatically identify the splicing point based on the Brillouin frequency shift (BFS) difference of adjacent sections. An adaptive parameter selection method based on k-distance is adapted to overcome the parameter sensitivity. The validity of the proposed DBSCAN algorithm is greater than 96%, which is evaluated by three commonly external validation indices with five typical BFS curves. According to the clustering results of different fiber cores and the tower schedule of the OPGW, the connecting towers are distinguished, which is proved as a 100% recognition rate. According to the identification results of different fiber cores of both the OPGW cables and tower schedule, the connecting towers can be distinguished, and the distributed strain information is extracted directly from the BFS to strain. The abnormal region is positioned and warned according to the distributed strain measurements. The method proposed herein significantly improves the efficiency of fault positioning and early warning, which means a higher operational reliability of the OPGW cables.
Accurate detection and quantification of gas mixtures are essential in various fields, but distinguishing multi-component gases in multi-point measurement scenarios faces substantial challenges. Here, we propose a multi-point multi-component gas sensing method based on frequency-modulated continuous-wave interferometry that can simultaneously achieve high spatial resolution for multi-point localization and high spectral resolution for multi-component gas analysis. As proof of concept, the method is experimentally demonstrated by four gas sensing nodes (including three single-pass gas cells and one multi-pass gas cell) to measure gas mixtures containing C2H2, C2H4, and CH4. It simultaneously achieves cm-level sensing spatial resolution and sub-GHz spectral resolution. Using single-pass gas cells, the achieved sensitivities for C2H2, C2H4, and CH4 are 0.63 ppm, 4.9 ppm, and 2.6 ppm, respectively; using the multi-pass gas cell, the sensitivities are improved to 8.6 ppb, 31 ppb, and 26 ppb, respectively. Possessing high spatial resolution, high spectral resolution and high sensitivity, the proposed method provides a powerful solution for analyzing gas mixtures placed in different locations.
This study presents an innovative solution to overcome the key technical challenges in ultra-long-range and weak-vibration monitoring based on phase-sensitive optical time-domain reflectometry (φ-OTDR). These challenges include fundamental limitations on sensing distance arising from probe pulse width, optical fiber nonlinearities, and transmission losses, as well as the difficulty of detecting weak vibration signals at the far end due to low signal-to-noise ratio and inevitable trade-off between noise suppression and detection bandwidth, and the large electrical dynamic range encountered in long-distance sensing. To address these issues, the system incorporates a cascaded dual-acoustic-optic modulator (AOM) configuration, which enables a high extinction ratio (ER), minimal frequency shift, and sharp rising edges in probe pulses. This design effectively suppresses continuous-wave (CW) light leakage, reduces the required detection bandwidth, and achieves high photoelectric conversion gain. A logarithmic amplifier is integrated after photoelectric conversion to compress the electrical dynamic range, significantly alleviating the dynamic range burden on the ADC and improving the effective resolution for weak distal signals. For enhanced long-haul signal transmission, delayed forward distributed Raman amplification (DRA) is combined with a remotely pumped erbium-doped fiber amplifier (RP-EDFA) to provide optimized gain distribution and improved signal integrity over extended distances. Furthermore, a convolutional feature extraction algorithm is implemented to enhance the sensitivity of weak vibration signal detection without sacrificing the system’s response bandwidth. Experimental results demonstrate a record-breaking sensing range of 250.36 km at a spatial resolution of 21 m under single-end operation, enabling robust detection of weak vibration signals buried in strong background noise and precise demodulation of both bandwidth-limited response vibrations and ultra-low-frequency vibrations. This work establishes a new benchmark for single-ended φ-OTDR-based distributed vibration sensing (DVS) using conventional constant-frequency pulses and provides a robust technical support for structural health monitoring of critical infrastructure.
This paper proposes a time-gated distributed optical frequency domain reflectometry (TGD-OFDR) system based on a fiber frequency-shifting loop (FFSL) to address the critical challenges of signal fading and limited response bandwidth (RBW) in distributed acoustic sensing (DAS). The core innovation leverages a polarization-maintaining FFSL to generate broadband frequency-encoded pulse sequences from a single initial pulse through cyclic modulation, significantly relaxing the requirements for high-speed modulation hardware and system cost by using a conventional acoustic-optic modulator (AOM). The AOM is further utilized to pre-correct the pulse train, suppressing transient effects from optical amplifiers and enhancing system stability. A polarization-frequency joint diversity scheme is used to mitigate interference and polarization fading simultaneously. Experimental results over 11.5 km of sensing fiber demonstrate a tenfold enhancement in RBW (up to 43.5 kHz vibration detection), successful demodulation of broadband chirped signals, excellent long-term stability, high sensitivity down to 0.1 Hz, and a highly linear response. This work presents a resource-efficient and scalable solution for fading-free, bandwidth-enhanced DAS.
We propose and demonstrate a high-performance DAS system based on multi-band pulse joint compression and adaptive matched filtering. A phase-modulated optical frequency comb is linearly chirped by an AOM, generating a multi-band pulse with continuous spectral coverage. An adaptive matched filter jointly compresses the entire multi-band pulse, thereby determining spatial resolution by the total synthesized bandwidth rather than a single band. Spectrum segmentation and aggregation suppress interference and polarization fading. Experiments over a 24.81 km fiber using a seven-band pulse (90–510 MHz) achieve a compressed FWHM of 24 cm, matching theory. After segmentation, a 50 cm resolution with fading-free demodulation is maintained. Vibration measurements demonstrate a strain resolution of 2.2 nε/√Hz at 500 Hz. This work offers a compact, robust solution for a high-performance DAS system that does not require wideband modulators.