Kota Shiba

Kota Shiba

Auto-generated profile, based on publicly available information

Kota Shiba

Taiwan Semiconductor Manufacturing Company, Yokohama, Kanagawa, Japan

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 November 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
KSKota Shiba
Kota Shiba
TOTatsuo Omori
Tatsuo Omori
KUKodai Ueyoshi
Kodai Ueyoshi
STShinya Takamaeda-Yamazaki
Shinya Takamaeda-Yamazaki
MMMasato Motomura
Masato Motomura
TKTadahiro Kuroda
Tadahiro Kuroda
A 28.8-GB/s 96-MB 3D-stacked SRAM is presented. A total of eight SRAM dies, designed in a 40-nm CMOS process, are vertically stacked and connected using an inductive coupling wireless link with a low-voltage NMOS push-pull transmitter that reduces the power of the link by 35% with a 0.4-V power supply. The SRAM utilizes an inverted bit insertion scheme that compensates for the degradation of the first transmitted bit, a coil termination scheme that aims to eliminate the ringing of 3D inductive coupling bus, and a 12:1 SerDes that minimizes power consumption and area overhead in inductive coupling channels. Low-power, large-capacity, 3-cycle latency 3D-stacked SRAM for a DNN accelerator is achieved with the combination of these techniques to serve as a replacement of 3D-stacked DRAM. The performance of the proposed 3D-SRAM is compared with HBM DRAM and achieves more than 50% lower energy consumption. The scaling scenario of the SRAM module is discussed in light of the scaling of the inductive coupling technology and logic process.

8 March 2011 in Metallurgical and Materials Transactions A
Verified
Journal Article
Closed access
PDF file
MTM. Tamura
M. Tamura
HSH. Sakasegawa
H. Sakasegawa
KSK. Shiba
K. Shiba
HTH. Tanigawa
H. Tanigawa
KSK. Shinozuka
K. Shinozuka
HEH. Esaka
H. Esaka

2 December 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
KSKota Shiba
Kota Shiba
MOMitsuji Okada
Mitsuji Okada
AKAtsutake Kosuge
Atsutake Kosuge
MHMototsugu Hamada
Mototsugu Hamada
TKTadahiro Kuroda
Tadahiro Kuroda
A 0.7-pJ/bit, 8.5-Gb/s/link inductive coupling interchip wireless communication interface for a 3D-stacked static-random access memory (SRAM) has been developed in a 7-nm FinFET process. A new physical placement method that allows coils to be placed over off-the-shelf SRAM macros with small magnetic field attenuation, together with the use of synchronous communication using Manchester encoding and a clocked comparator to enable the detection of small-swing signals, achieves a 26% reduction in SRAM die area compared to through-silicon via (TSV)-based stacking. Interchip communication at 0.7 pJ/bit, 8.5 Gb/s/link was confirmed using test chips. A 4-hi 3D-stacked SRAM module using the proposed interface achieves a 1.2-TB/s/mm $^{2}$ area efficiency, representing a two orders-of-magnitude improvement over the state-of-the-art 3D-stacked SRAM.

6 March 2023 in IEEE Solid-State Circuits Letters
Verified
Journal Article
Closed access
KSKota Shiba
Kota Shiba
MOMitsuji Okada
Mitsuji Okada
AKAtsutake Kosuge
Atsutake Kosuge
MHMototsugu Hamada
Mototsugu Hamada
TKTadahiro Kuroda
Tadahiro Kuroda
A 12.8-Gb/s 0.5-pJ/b inductive coupling inter-chip wireless communication interface for a 3D-stacked SRAM has been developed in a 7-nm FinFET process. A new clocked hysteresis comparator that eliminates encoding for synchronous communication achieves 1.49 times higher data rate and 36% lower energy consumption compared to conventional synchronous communication using Manchester encoding. Inter-chip communication at 0.5-pJ/b 12.8-Gb/s was confirmed using test chips. The proposed interface for a 4-hi 3D-stacked SRAM module achieves a 1.7-TB/s/mm2 IO area efficiency and 111-GB/s/W bandwidth per power, representing a two-orders-of-magnitude improvement in area efficiency over a state-of-the-art interface for a 3D-stacked SRAM with competitive per-power bandwidth.

2 May 2023 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
KSKota Shiba
Kota Shiba
MOMitsuji Okada
Mitsuji Okada
AKAtsutake Kosuge
Atsutake Kosuge
MHMototsugu Hamada
Mototsugu Hamada
TKTadahiro Kuroda
Tadahiro Kuroda
We have developed a sparse matrix reordering algorithm with a novel 3D-SRAM-centric Polyomino accelerator that enables efficient processing of the reordered matrix for parameter compression. By reordering randomly pruned, irregularly structured sparse matrices into regularly structured matrices, both the compression ratio of the data and the efficiency of the hardware processing increase. The reordering algorithm can be implemented simply by attributing it to the widely known k-sum problem. We also developed a compression format for storing the reordered matrices and show that the reordered regular structure can reduce the amount of required memory by 63% compared with the conventional method. The proposed Polyomino accelerator can efficiently process reordered matrices by using a 3D stacked SRAM, which is an external memory with random accessibility and low latency. The measurement results using a test chip fabricated in a 180-nm CMOS process demonstrate that the proposed accelerator can achieve high area-efficiency and high energy-efficiency and scales well with the pruning rate.

28 February 2020 in Japanese Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
KSKota Shiba
Kota Shiba
MHMototsugu Hamada
Mototsugu Hamada
TKTadahiro Kuroda
Tadahiro Kuroda
A low-cost power supply technique for a 3D system-on-a-chip (SoC) is experimentally confirmed by using highly doped silicon via (HDSV). A 100 × 100 μm 2 HDSV in a 2 μ m thick silicon wafer exhibits a resistance of 2.7 Ω after wafer thinning, bonding, and annealing. A 9-stack 3D SoC is designed with an HDSV power supply, and its area overhead is calculated as 11%. Moreover, technology computer-aided design simulations show that the resistance of the same HDSV could be as low as 22 mΩ, which turns into an area overhead of 0.09%. This work shows detailed experimental results of wafer bonding and current–voltage ( IV ) characteristics and discusses the applied 3D SoC design.