19 August 2020 in ACS Omega
Fluorescence spectroscopy is a common technique used to monitor early metallic corrosion. The fluorescence response characteristics of rhodamine-ethylenediamine toward Cu2+ have been studied using fluorescence and infrared spectroscopy. Fluorescence microscopy and electrochemical impedance spectroscopy were used to study the monitoring effect of rhodamine-ethylenediamine on the corrosion of copper relics protected by an epoxy coating. The results showed a strong fluorescent response and selectivity toward Cu2+ that existed using rhodamine-ethylenediamine. Early metallic corrosion of copper relics can be effectively monitored upon adding 0.8 wt % rhodamine-ethylenediamine to an epoxy coating. When the soaking time was increased, the fluorescence intensity of the fluorescent area on the coating became stronger. In addition, the area of the luminous coating reached ∼0.06 mm2 and the area of corrosion under the protective coating was ∼0.008 mm2, which was about 1/10 of the fluorescence area observed on the coating.
1 August 2025 in BioResources
Palm-leaf manuscripts use palm leaves as their medium. The inherent poor dimensional stability of this biological material is the main reason for ink and pigment detachment. As a valuable cultural heritage, the detachment of ink or pigment on the surface of palm leaf manuscripts under humid-dry cycling poses a critical challenge in the field of conservation. This study simulated traditional palm leaf manuscript preparation and employed accelerated humid-dry cycling to elucidate ink/pigment detachment mechanisms. The substrate—composed of cellulose, lignin, hemicellulose, waxes, and pectin—exhibits anisotropic deformation during cycling: thickness/tangential expansion significantly exceeds longitudinal direction. Chromatic analysis showed minor ΔE* increases in substrate, ink, and pigment, confirming stable chemistry. Color changes primarily resulted from interfacial microcracks and light scattering due to physical deformation. Detachment area escalated with cycles, driven by substrate-ink/pigment expansion mismatch. This induces interfacial tensile-compressive stress cycling, causing mechanical fatigue, adhesion loss, and eventual powdering/flaking. Key conservation strategies include stabilizing environmental humidity and developing flexible protective coatings to buffer interfacial stress. This provides theoretical foundations for scientific preservation of palm leaf manuscripts and conservation material design.