10 September 2024 in Ultrasonics Sonochemistry
How to precisely control and efficiently utilize the physical processes such as high temperature, high pressure, and shockwaves during the collapse of cavitation bubbles is a focal concern in the field of cavitation applications. The viscosity change of the liquid will affect the bubble dynamics in turn, and further affect the precise control of intensity of cavitation field. This study used high-speed photography technology and schlieren optical path system to observe the spatiotemporal evolution of shockwaves in liquid with different viscosities. It was found that as the viscosity of the liquid increased, the wave front of the collapse shockwave of the cavitation bubble gradually thickened. Furthermore, a high-frequency pressure testing system was used to quantitatively analyze the influence of viscosity on the intensity of the shockwave. It was found that the pressure peak of the shockwave in different viscous liquid was proportional to Lb (L represented the distance between the center of bubble and the sensor measuring point), and the larger the viscosity was, the smaller the value of b was. Through in-depth analysis, it was found that as the viscosity of the liquid increased, the proportion of the shockwave energy of first bubble collapse to the maximal mechanical energy of bubble gradually decreased. The proportion of the mechanical energy of rebounding bubble to the maximal mechanical energy of bubble gradually increased. These new findings have an important theoretical significance for the efficient utilization of ultrasonic cavitation.
7 February 2025 in Ultrasonics Sonochemistry
Cavitation bubble dynamics at low ambient pressure differ from those at normal pressure, which can affect the efficiency of cavitation applications in industrial, medical fields, etc. Therefore, a low-voltage discharge method was utilized to produce cavitation bubbles in water at low ambient pressures (56 kPa to 96 kPa), and the impact of low ambient pressure on bubble collapse behavior was systematically studied. Experimental results show that as ambient pressure decreases, the pressure difference between the interior and exterior of bubbles, induced by identical energy, changes during their evolution. Consequently, the bubbles exhibit a gradual increase in maximum radius and an extended evolution period within an unbounded environment. Measurements of the shockwave intensity during bubble collapse revealed that under reduced ambient pressures, the peak pressure of shockwaves from bubble initial collapse gradually diminishes. Correspondingly, the proportion of shockwave energy relative to the bubble's total mechanical energy also decreases progressively. Based on the behavior of bubbles under low ambient pressure conditions described above, it was found that as ambient pressure decreases, the maximum microjet velocity during cavitation bubble collapse in proximity to rigid walls gradually decreases at a constant bubble-wall distance. Furthermore, the peak of the maximum microjet velocity appears at approximately γ ≈ 0.8 across various ambient pressure conditions. These findings provide insights to enhance cavitation applications, including cavitation erosion prevention, medical treatments, and chemical catalysis in high-altitude and low-pressure environments.
1 April 2024 in Physics of Fluids
Numerous scientists have thoroughly researched cavitation bubble dynamics using experimental methods such as tube arrest, underwater discharge, ultrasound, and laser focusing. In this study, with the aid of high-speed photography, the formation mechanism of the electrode-contact spark-induced cavitation bubble is discovered, i.e., electrolysis results in non-condensable gases wrapping the small inter-electrode gaps, and the non-condensable gases are broken down by discharge to form plasma, which then induces the cavitation bubble. Since the cavitation bubbles already contain a certain amount of non-condensable gases during the discharge process, the differences in the spatiotemporal evolution and collapse characteristics of the cavitation bubbles with varying amounts of non-condensable gases are further analyzed. The results show that underwater electrode-contact discharge system has an optimal voltage if the capacitance and discharge electrode size remain constant, and the cavitation bubbles generated under the optimal voltage condition are not only morphologically closest to the laser-induced cavitation bubbles, but also the change in radius over time during collapse is quite consistent with the Rayleigh bubble. Furthermore, compared to cavitation bubbles generated under varying voltages, those induced by the optimal voltage have a lower amount of non-condensable gases. This leads to the minimum first contraction radius and the maximum rebound radius being close to the corresponding values of the laser-induced cavitation bubbles. These new findings are of great significance for the improvement of experimental technology in the study of cavitation bubble dynamics, obtaining precise and dependable experimental data, and validating numerical simulations.
1 August 2025 in Physics of Fluids
Currently, experimental studies on cavitation bubble dynamics typically employ one of several established methods for bubble generation, including underwater explosions, underwater electrical discharges, tube arrest, and laser focusing. However, differences among these methods result in significant variation in experimental precision and repeatability. In this study, we propose a novel cavitation bubble generation approach based on underwater corona discharge induced by a high-voltage single-electrode system. The aim is to investigate the key factors influencing the bubble dynamics associated with this unique discharge method. Experiments conducted in saline solutions with different electrical conductivities reveal that the conductivity markedly affects the corona discharge process and the associated plasma morphology, thereby altering the dynamic behavior of the cavitation bubbles. For instance, as conductivity increases, the maximum radius of bubble expansion in free field decreases, the normalized oscillation period becomes longer, and the minimum radius increases. These changes in bubble behavior are expected to influence the development of micro-jets and the intensity of shock waves under various boundary conditions. Focusing on cavitation bubbles generated beneath a free liquid surface, the results show that with increasing conductivity, the velocity of the micro-jet increases, then decreases, and increases again. Similarly, the peak pressure of the shock wave shows an initial rise followed by a decline. These new findings not only provide important support for improving the experimental accuracy of bubble dynamics and for future investigations into scale effects, but also offer theoretical insights into the cavitation intensity relevant to underwater discharge-based sterilization applications.
1 December 2025 in Physics of Fluids
Cavitation often occurs in the form of bubble clusters or cavitation clouds. To explore the interaction among cavitation bubbles within clusters or clouds, the corona underwater discharge technology was used to induce two cavitation bubbles with similar sizes and synchronized initial formation near a rigid wall. It was found that the direction and velocity of the micro-jet of the near-wall cavitation bubble are significantly influenced by the other cavitation bubble. Specifically, as the bubble-bubble distance and the bubble-bubble-wall angle increase, the micro-jet of the near-wall cavitation bubble gradually shifts from mutual attraction to direct impact on the wall. As the micro-jet direction changes, the forms of shock waves generated by two cavitation bubbles near the rigid wall also change accordingly. Specifically, shock waves exhibit varying forms of stratification as the bubble-bubble distance increases. Accordingly, the shock wave intensity of the near-wall cavitation bubble can be either higher or lower than that of a single cavitation bubble near a rigid wall. By analyzing the influence patterns of micro-jets and shock waves, the critical condition for inhibition and enhancement effects of two cavitation bubbles with similar sizes near a rigid wall was further identified based on the impact intensity on the rigid wall. The characteristics of micro-jets and shock waves caused by two cavitation bubbles near a rigid wall have significant theoretical implications for the quantitative study of bubble clusters and cavitation clouds, as well as for the prediction of cavitation erosion models.