6 September 2010 in Journal of Fluid Mechanics
We introduce a new numerical method for the study of scalar mixing in two-dimensional advection fields. The position of an advected material strip is computed kinematically, and the associated convection–diffusion problem is solved using the computed local stretching rate along the strip, assuming that the diffusing strip thickness is smaller than its local radius of curvature. This widely legitimate assumption reduces the numerical problem to the computation of a single variable along the strip, thus making the method extremely fast and applicable to any large Péclet number. The method is then used to document the mixing properties of a chaotic sine flow, for which we relate the global quantities (spectra, concentration probability distribution functions (PDFs), increments) to the distributed stretching of the strip convoluted by the flow, possibly overlapping with itself. The numerical results indicate that the PDF of the strip elongation is log normal, a signature of random multiplicative processes. This property leads to exact analytical predictions for the spectrum of the field and for the PDF of the scalar concentration of a solitary strip. The present simulations offer a unique way of discovering the interaction rule for building complex mixtures which are made of a random superposition of overlapping strips leading to concentration PDFs stable by self-convolution.
9 May 2018 in Journal of Fluid Mechanics
This paper presents experimental and theoretical results on the internal waves emitted by a bluff body moving horizontally in a linearly stratified fluid. Three different bluff bodies (a sphere, a spheroid and a cylinder) have been used in order to study the effect of the shape of the bluff body, although most of the results are obtained for the sphere. Two types of internal waves have been observed experimentally: large wavelength lee waves generated by the bluff body itself and small wavelength coherent wake waves generated by the turbulent wake. First, the lee waves are separated from the wake waves by averaging the experimental measurements in the frame moving with the bluff body. The velocity amplitude of the lee waves scales as the inverse of the Froude number $F=2U_{B}/(ND)$ for $F>2$ (where $U_{B}$ is the towing velocity, $D$ the diameter and $N$ the buoyancy frequency). This scaling proves that the internal waves are related to the drag of the bluff body which is due to the separation of the flow behind the bluff body. This separation is usually not taken into account in the classical models which assume that the flow is dipolar. The drag can be modelled as a point force in the Navier–Stokes equations, which gives a correct prediction of the structure and the amplitude of the lee waves. Second, the wake waves have been separated from the lee waves by averaging the velocity fields in the frame moving at the phase velocity of the waves. The phase velocity and the wavelength scale as $F^{-2/3}$ and $F^{1/3}$ respectively which correspond to the velocity and distance between same sign vortices of the von Kármán vortex street. A simplified model is derived for the internal waves emitted by the double row of moving point vortices of the von Kármán street. The amplitude of the wake waves is measured experimentally and seems to depend on the Reynolds number.
21 September 2020 in Journal of Fluid Mechanics
The flow with low shear inside a bladeless mixer is characterized experimentally. This soft mixer, inspired by the precession of the Earth, consists of a cylindrical container rotating around its axis and tilted from the vertical. For low Froude numbers, the free surface remains horizontal, thus generating a forcing on the tilted rotating fluid. As in the case of a precessing cylinder, this forcing excites global inertial modes (Kelvin modes) which become resonant when the height of fluid is equal to a multiple of a half-wavelength. Ekman pumping saturates the amplitude of the mode at a value proportional to the square root of the Reynolds number. For sufficiently large tilt angles and Reynolds numbers, the global mode destabilizes via a parametric triadic instability involving two additional Kelvin modes. The viscous threshold of the instability can be predicted analytically with no fitting parameter and is in excellent agreement with the experimental results. This instability generates a strong mixing which is as efficient as the one achieved using a classical Rushton turbine, but with a shear 20 times smaller. This simple bladeless mixer is thus an excellent candidate for large scale bioreactors where mixing is needed to enhance gas exchanges but where shear is harmful for fragile cells. Preliminary results obtained for the growth of microalgae (dinoflagellates) in such photobioreactors suggest that it could be a technological breakthrough in biotechnologies.
27 February 2018 in Journal of Fluid Mechanics
Contained rotating flows subject to precessional forcing are well known to exhibit rapid and energetic transitions to disorder. Triadic resonance of inertial modes has been previously proposed as an instability mechanism in such flows, and that idea was developed into a successful model for predicting instability in a cylindrical container when departures from solid-body rotation are sufficiently small. Using direct numerical simulation and dynamic mode decomposition, we analyse instabilities of precessing cylinder flows whose three-dimensional basic states, steady in the gimbal frame of reference, may depart substantially from solid-body rotation. In the gimbal frame, the instability can be interpreted as resulting from a supercritical Hopf bifurcation that results in a limit-cycle flow. In the cylinder frame of reference, the basic state is a rotating wave with azimuthal wavenumber $m=1$ , and the instability satisfies triadic-resonance conditions with the instability mode maintaining a fixed orientation with respect to the basic state. Thus, we are able to demonstrate the existence of two alternative but congruent explanations for the instability. Additionally, we show that basic states may depart substantially from solid-body rotation even with modest cylinder tilt angles, and growth rates for instabilities may be sufficiently large that nonlinear saturation to disordered states can occur within approximately ten cylinder revolutions, in agreement with experimental observations.
10 November 2022 in Journal of Fluid Mechanics
The advection–diffusion of a small surface element of scalar in three dimensions (or of a small line element in two dimensions) is solved analytically thanks to the Ranz transform (Ranz, AIChE J., vol. 25, issue 1, 1979, pp. 41–47). As the quantum or elementary brick of any complex mixture, we call this element a diffuselet. Its evolution is computed numerically from the integration of the velocity gradient along the trajectory, as classically done for the Lyapunov exponents. The concentration profile across the diffuselet is obtained from the product of its initial orientation with a dimensionless tensor. Averaging over all initial orientations yields simple formulae for the mean scalar variance and the scalar probability distribution function (p.d.f.). This technique is then applied to two-dimensional and three-dimensional sine flows, in excellent agreement with direct numerical simulations. For these simple flows, the temporal integration is obtained analytically leading to simple integrals for the scalar variance and p.d.f. Statistics of stretching rates are calculated as well. The Lyapunov exponent is close to the value for short-time correlated flows (Kraichnan, J. Fluid Mech., vol. 64, issue 4, 1974, pp. 737–762) in the case of a small displacement during each step; it is close to the value for a simple shear in the case of a large displacement. The p.d.f. of stretching factors are log normal with a ratio between the mean and the variance equal to half the dimension of space for small displacements (in agreement with Kraichnan, J. Fluid Mech., vol. 64, issue 4, 1974, pp. 737–762), but increases strongly for large displacements.
20 December 2017 in Journal of Fluid Mechanics
The diffusive strip method (DSM) is a near-exact numerical method for mixing computations initially developed in two dimensions (Meunier & Villermaux, J. Fluid Mech., vol. 662, 2010, pp. 134–172). The method, which consists of following stretched material lines to compute the resulting scalar field a posteriori, is extended here to three-dimensional flows. We describe the procedure and its three-dimensional peculiarity, which relies on the Lagrangian advection of a triangulated surface from which the stretching rate is extracted to infer the scalar field. The method is first validated at moderate Péclet number against a classical pseudospectral method solving the advection–diffusion equation for a Batchelor vortex, and then applied to a simple Taylor–Couette experimental configuration with non-rotating boundary conditions at the top-end disk, bottom-end disk and outer cylinder. This motion, producing an elaborate although controlled steady three-dimensional flow, relies on Ekman pumping arising from the rotation of the inner cylinder. A recurrent two-cell structure is separated by the horizontal mid-plane and formed by stream tubes shaped as nested tori under laminar flow conditions. A scalar blob in the flow experiences a Lagrangian oscillating dynamics undergoing stretchings and compressions, driving the mixing process. The DSM enables the calculation of the blob elongation and scalar concentration distributions through a single variable computation along the advected blob surface, capturing the rich evolution observed in the experiments. Interestingly, the mixing process in this axisymmetric and steady three-dimensional flow leads to a linear growth of surfaces in time similar to the one obtained in a two-dimensional shear. The potentialities, limits and extension of the method to more general flows are finally discussed.