14 November 2019 in Energy & Environmental Science
A comprehensive roadmap describing the current density- and size-dependent dendrite growth mechanisms is presented. Based on a thermodynamically consistent theory, the combined effects of chemical diffusion, electrodeposition, and elastic and plastic deformation kinetics are analyzed to rationalize their contributions to experimentally observable morphologies. A critical current density, î* = ziliml(ΔGΩκi), in the tσ < t < tSand range, results in plastic flow at the tips, dendrite bifurcation, and bent and kinked morphologies. Three dendrite growth mechanisms are observed: (1) electrochemical shielding, where there is practically no electrodeposition/electrodissolution; (2) stress-induced electrodissolution and electrodeposition on those interfaces directly facing each other, generating a self-sustained overpotential that pushes the dendrites towards the counter electrode; and (3) local, lateral plastic extrusion in those side branches experiencing non-hydrostatic stresses. Six regimes of lithium electrodeposit growth are identified: (i) thermodynamic suppression regime, (ii) incubation regime, (iii) base-controlled regime, (iv) tip-controlled regime, (v) mixed regime, and (vi) Sand's regime.
25 May 2018 in Nature Communications
Flash sintering has attracted significant attention as its remarkably rapid densification process at low sintering furnace temperature leads to the retention of fine grains and enhanced dielectric properties. However, high-temperature mechanical behaviors of flash-sintered ceramics remain poorly understood. Here, we present high-temperature (up to 600 °C) in situ compression studies on flash-sintered yttria-stabilized zirconia (YSZ). Below 400 °C, the YSZ exhibits high ultimate compressive strength exceeding 3.5 GPa and high inelastic strain (~8%) due primarily to phase transformation toughening. At higher temperatures, crack nucleation and propagation are significantly retarded, and prominent plasticity arises mainly from dislocation activity. The high dislocation density induced in flash-sintered ceramics may have general implications for improving the plasticity of sintered ceramic materials.
1 August 2015 in Materials Science and Engineering: A
15 July 2020 in npj Computational Materials
The microstructural mechanisms leading to onset of the flash sintering are demonstrated experimentally and theoretically for Yttria Stabilized Zirconia, YSZ. Three regimes leading to flash event are identified: (1) Radiation-dominated regime, where the oven controls the heating of the sintered sample, and a small subset of particle-particle contacts and surfaces of the green body define percolative paths for the charge to flow along and across the interfaces; (2) Transition regime, where charge transport is suppressed across particle contact misorientations and deflects to surficial and small angle particle contact misorientations. As a result, internal Joule heating takes over externally-driven radiation heating. Finally, (3) Percolative regime, where the concentration of oxygen vacancies drastically increases at particle contacts, surfaces, and triple junctions, and enables charge to flow through multiple paths, generating large amounts of Joule heating, resulting in the onset of a flash event. The validated theory sets the stage to rationalize the microstructural evolution and charge transport on a ceramic green body during flash sintering.
1 June 2018 in Energy & Environmental Science
We establish a comprehensive space-charge treatment that includes electrochemomechanical effects to physically describe the equilibrium and transport properties of charged interfaces in ion-conducting solids. The theory is consistent with the laws of thermodynamics and Maxwell's equations and naturally includes the free energy contributions of the chemical, electrical, and mechanical fields at and in the vicinity of homo- and heterointerfaces. In the dilute limit, and in the absence of chemomechanical stresses, the theory reduces to the classic, well-established Gouy–Chapman description. In the strong substitution limit, the model naturally predicts the appearance of a Mott–Schottky-type layer and reproduces the well known experimentally observed behavior, including grain boundary solute segregation. We demonstrate the validity of this theory for polycrystalline GdyCe1−yO2−y/2, GCO. In the low substitution limit, electrochemical and chemomechanically-induced stresses favor the segregation of which locally expands the crystalline lattice, and thus promotes the formation of a wide depletion zone of oxygen vacancies in front of the interface, negatively impacting the macroscopic ionic conductivity. For high gadolinia substitution, interface segregation induces compressive stresses of 45 to 700 MPa and a weakly tensile region in the vicinity of the GCO homointerface, as a result of coupled, long range, electrochemomechanical interactions. The accumulation of gadolinium defects at the grain boundary locks-in oxygen vacancies, which in turn suppresses the depletion zone from the extended immediate neighborhood and decreases its macroscopic ionic conductivity. This is the first model where the grain boundary core explicitly includes chemomechanical effects.
20 February 2019 in npj Computational Materials
Surfaces and interfaces in ionic ceramics play a pivotal role in defining the transport limitations in many of the existing and emerging applications in energy-related systems such as fuel cells, rechargeable batteries, as well as advanced electronics such as those found in semiconducting, ferroelectric, and piezotronic applications. Here, a variational framework has been developed to understand the effects of the intrinsic and extrinsic ionic species and point defects on the structural and electrochemical stability of grain boundaries in polycrystalline ceramics. The theory predicts the conditions for the interfacial electrochemical and structural stability and phase transitions of charged interfaces and quantifies the properties induced by the broad region of electrochemical influence in front of a grain boundary capable of spanning anywhere from a few angtroms to entire grains. We demonstrate the validity of this theory for YxZr1−xO2−x/2, cubic yttria stabilized zirconia. For small crystallographic misorientations, sharp Debye-type interfaces, D(1): $${\mathrm{C}}^{VY}{\mathrm{S}}^{\underline {VY} }$$ , are favored and promote high ionic conductivity in materials in polycrystalline form. For large grain boundary misorientations and large amounts of [Y2O3] substitutions, three Mott–Schottky interfaces, MS(2): $${\mathrm{C}}^{VY\,\underline h e}{\mathrm{S}}^{\underline {VYh} e}$$ , MS(2): $${\mathrm{C}}^{VY\underline h e}{\mathrm{S}}^{e\underline {hVY} }$$ , and MS(2): $${\mathrm{C}}^{VY}{\mathrm{S}}^{\underline h e}$$ are responsible for controlling grain boundary segregation and the observed poor macroscopic ionic transport, in great agreement with the scientific literature.