Monolithic magnetic carbonaceous materials as adsorbents can provide easy recovery and quickly separate pollutants in wastewater treatment; however, the development of designed fabrication processes remains a great challenge. Herein, a supermagnetic monolithic material was synthesized for the first time via the controllable carbonization of ferric alginate beads, and its Cr(VI) adsorption behaviour was investigated in detail. This new adsorbent was characterized using field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), N2 adsorption–desorption isotherms, X-ray diffraction (XRD), Raman spectroscopy, vibrating sample magnetometry (VSM), zeta potential measurements, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Kinetic and equilibrium studies indicated that the experimental data for Cr(VI) adsorption were best described by pseudo-second-order kinetic and Langmuir models. The maximum adsorption capacity of the material for Cr(VI) was calculated to be 143.20 mg g−1 at room temperature. Evaluation of the thermodynamic parameters (ΔH > 0, ΔS > 0, and ΔG < 0) revealed that the adsorption process was endothermic and spontaneous. The mechanistic studies showed that the adsorption of Cr(VI) likely involved electrostatic attraction and a redox reaction. It was demonstrated that the material was an effective adsorbent for Cr(VI) removal with quick separation; most importantly, compared to conventional powdery adsorbents, this bead-like material could be handled much more conveniently for reuse and scale-up for practical applications, owing to its ease of operation and separation.
Sodium alginate-derived magnetic carbonaceous materials (Fe–SA-X, X means heating temperature) were fabricated by carbothermal reduction of ferric alginate, aiming for efficient removal of Cr(VI) from water. The materials were characterized by X-ray diffraction patterns, scanning electron microscopy, transmission electron microcopy, Fourier transform infrared spectra, X-ray photoelectron spectroscopy, nitrogen sorption, and Raman spectrometry. The adsorption conditions for Cr(VI) onto the samples were optimized, and adsorption kinetics and isotherm studies were thoroughly studied. The adsorption data fitted well with the pseudo-second-order model and Langmuir isotherm model. The Fe–SA-800 was much more efficient than both Fe–SA-400 and Fe–SA-600, and the maximum adsorption capacity was calculated to be 86.32 mg g−1 based on the Langmuir model. The adsorption mechanism was fully discussed, and desorption and regeneration experiments showed that Fe–SA-800 could be easily regenerated and reused. The above results showed that resulting magnetic biosorbents are promising for toxic Cr(VI) removal from water.