1 July 2014 in Journal of Biomedical Optics
Brain gliomas are the most common and deadly malignant brain tumors.1 Gliomas are the leading cause of death by brain diseases in both children and adults,2 and the median survival for patients with brain gliomas is a mere 12 to 15 months.3 An accurate, early clinical diagnosis of brain gliomas is crucial for patients’ treatment, in which microscopic pathology is the most commonly used technique for tissue analysis. Embedding brain gliomas in paraffin is a widely used first step in microscopic pathology analysis owing to its better storage and long-term tissue morphology preservation in clinical settings.4 In addition, there are a large number of paraffin-embedded brain gliomas stored in medical institutions, which also provide unique opportunities for later pathological studies. More importantly, by excluding water, paraffin-embedded brain gliomas allow us to reveal the intrinsic properties of brain gliomas.
4 December 2017 in Biomedical Optics Express
We demonstrated that attenuated total reflectance terahertz time-domain spectroscopy (ATR THz-TDS) is able to monitor oxidative stress response of living human cells, which is proven in this work that it is an efficient non-invasive, label-free, real-time and in situ monitoring of cell death. Furthermore, the dielectric constant and dielectric loss of cultured living human breast epithelial cells, and along with their evolution under oxidative stress response induced by high concentration of H2O2, were quantitatively determined in the work. Our observation and results were finally confirmed using standard fluorescence-labeled flow cytometry measurements and visible fluorescence imaging.
1 January 2013 in Review of Scientific Instruments
A pulsed power generator CQ-4 was developed to characterize dynamic behaviors of materials under ramp wave loading, and to launch high velocity flyer plates for shock compression and hypervelocity impact experiments of materials and structures at Institute of Fluid Physics, China Academy of Engineering Physics. CQ-4 is composed of twenty capacitor and primary discharge switch modules with total capacitance of 32μF and rated charging voltage of 100 kV, and the storage energy is transmitted by two top and bottom parallel aluminum plates insulated by twelve layers of polyester film with total thickness of 1.2 mm. Between capacitor bank and chamber, there are 72 peaking capacitors with total capacitance of 7.2 μF and rated voltage of 120 kV in parallel, which are connected with the capacitor bank in parallel. Before the load, there is a group of seven secondary self-breaking down switches connected with the total circuit in series. The peaking capacitors and secondary switches are used to shape the discharging current waveforms. For short-circuit, the peak current of discharging can be up to 3 ∼ 4 MA and rise time varies from 470 ns to 600 ns when the charging voltages of the generator are from 75 kV to 85 kV. With CQ-4 generator, some quasi-isentropic compression experiments under ramp wave loadings are done to demonstrate the ability of CQ-4 generator. And some experiments of launching high velocity flyer plates are also done on CQ-4. The experimental results show that ramp wave loading pressure of several tens of GPa on copper and aluminum samples can be realized and the velocity of aluminum flyer plate with size of 10 mm × 6 mm × 0.35 mm can be accelerated to about 11 km/s and the velocity of aluminum flyer plate with size of 10 mm × 6 mm × 0.6 mm can be up to about 9 km/s, which show that CQ-4 is a good and versatile tool to realize ramp wave loading and shock compression for shock physics.
1 January 2018 in Journal of Alloys and Compounds
23 November 2015 in Optics Express
We proposed a three-dimensional model to simulate terahertz generation from LiNbO3 crystal under intense laser excition (up to ~50 mJ/cm2). The impact of three-photon absorption, which leads to free carrier generation and free carrier saturation (when pump fluence above ~10 mJ/cm2) on terahertz generation was investigated. And further with this model, we stated the optimized experimental conditions (incident postion, beam diameter, and pulse duration, etc) for maximum generation efficiency in commonly-used tilted-pulse-front scheme. Red shift of spectrum, spatial distribution “splitting” effects of emitted THz beam, and primilary experimental verification under intense laser excitation are given.
22 June 2016 in Optics Express
A cylindrical lens telescope tilted-pulse-front pumping scheme was proposed for high energy terahertz (THz) pulse generation. This scheme allows higher pump energy to be used with lower saturation effects under high pump fluence, and higher THz generation efficiency was achieved within large range of pump energy. The optimum pump pulse duration and crystal cooling temperature for THz generation in LiNbO3 (LN) crystal were also researched systematically. Excited by 800-nm laser, up to 0.19 mJ THz pulse energy and 0.27% conversion efficiency was demonstrated under 800-nm 400-fs laser excitation with ~100-mJ pulse energy and 150-K LN cooling temperature.