Kapar Aryngazin

Kapar Aryngazin

Auto-generated profile, based on publicly available information

Kapar Aryngazin

Toraighyrov University, Kazakhstan

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 May 2016 in Water
Verified
Journal Article
Open access
PDF file
ZBZakir Bekturganov
Zakir Bekturganov
KTKamshat Tussupova
Kamshat Tussupova
Ronny BerndtssonRonny Berndtsson
Ronny Berndtsson
NSNagima Sharapatova
Nagima Sharapatova
KAKapar Aryngazin
Kapar Aryngazin
MZMaral Zhanasova
Maral Zhanasova
The present paper provides an extensive literature review on water related health issues in Central Asia. Even though the per capita amount of available freshwater is substantial in all Central Asian states the uneven distribution in time and space creates problems for water availability. Due to this, the Central Asian economies are developing under increasing water deficiency. The degradation of water supply systems and sewage treatment plants is often severe leading to potentially high water loss rates and inadequate accessibility to safe water supply. In this context, rural areas are the most affected. Low tariffs in combination with absent metering and low collection rates for water fees mean that operation and maintenance costs for basic services of water supply and sanitation are not covered. Unsafe water supply contains both microbiological and non-microbiological contaminants. Helminthiasis and intestinal protozoa infections are of considerable public health importance in Central Asia. Agricultural and industrial pollution is especially affecting downstream areas of Amu Darya and Syr Darya rivers. In large areas copper, zinc, and chromium concentrations in water exceed maximum permissible concentration. Thus, there is an urgent need to strengthen the environmental monitoring system. Small-scale water supply and sanitation systems need to be developed in line with more efficient public spending on these.

28 December 2023 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
AKAkishev Karshyga
Akishev Karshyga
ATAmandos Tulegulov
Amandos Tulegulov
AKAslan Kalkenov
Aslan Kalkenov
KAKapar Aryngazin
Kapar Aryngazin
ZNZhadira Nurtai
Zhadira Nurtai
AJAinura Jumagaliyeva
Ainura Jumagaliyeva
The object of the study is the automotive industry of the Republic of Kazakhstan. The subject of the study is the management of the decision-making process in assessing the consumer capabilities of potential customers of car dealerships, the process of forecasting car pricing. A method using a global search engine optimization algorithm, a forest conveyor line with a random forest model with Bayesian optimization (RFBO), is proposed. The algorithm of the method is as follows: – obtaining and processing initial data taking into account the degree of uncertainty; – formation of the optimization vector; – creation of descendant vectors; – ordering of vectors in descending order; – reducing the dimension of the feature space; – knowledge base training. In the presented work, data from websites www.m.Kolesa.kz, www.Cars.com and the average values of the median salary in the Republic of Kazakhstan were used to create a knowledge base, the program code of the platform was created using the Visual Studio Code in the Python language. The task to be solved was to predict car prices and assess the consumer capabilities of potential car dealership customers. We evaluate our solution based on a dataset that was created by analyzing several car classified sites and data on potential customers. Our results show that the accuracy of the model training was 92.1 %, and the accuracy of forecasting car prices and evaluating the consumer capabilities of potential customers was 87.3 % – this is primarily due to lower prediction errors than those of the estimated regressors using the same set of input data, high-quality object mapping and a more competitive RFBO algorithm, superior to simple linear models. The developed software solution should be used for making automated management decisions by car dealerships and credit organizations

30 September 2024 in Вестник КазУТБ
Verified
Journal Article
Open access
PDF file
KAK. Akishev
K. Akishev
KAK. Aryngazin
K. Aryngazin
BBB. Biybosynov
B. Biybosynov
Currently, a large amount of man-made waste has been stored on the territory of the Republic of Kazakhstan, which, by their chemical and mineral properties, are a serious raw material base for the production of building materials. The quality indicators of raw materials affect not only the physical and strength characteristics of the finished product, but also the cost. In our study, we use man-made raw materials for the production of construction products, as additives to clay for the semi-dry method of producing ceramic products, since this method is less labor-intensive and does not require large financial investments. One of the most important characteristics of technological equipment is performance. Technological equipment for the production of construction products is represented on the market of Kazakhstan by leading foreign companies, including Chinese, Russian, Turkish, Spanish, Kazakh manufacturers are not included in this list. Technological equipment can produce products from a certain type of raw materials, for which such parameters as productivity, quality indicators of raw materials and others are indicated in the technical documentation. That is, when using technogenic raw materials as additives to the charge, it is not possible to determine productivity, for objective reasons. In this regard, the task of calculating the productivity of the technological line for the production of ceramic products using information technology is relevant. As a software tool in the study, the program "Simulation model of a technological line for the production of construction products using industrial waste" is used, written in C++, in accordance with the principles of object-oriented programming. Performance calculations were performed for technological equipment Titanium 900-120 DHEX press, Titanium 80 D press. The presented program can be used by individual entrepreneurs not only to calculate productivity, output volume, but also to justify the choice of technological equipment for the production of ceramic products.

28 February 2024 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
AKAkishev Karshyga
Akishev Karshyga
AKAryngazin Kapar
Aryngazin Kapar
OEOspanov Erbol
Ospanov Erbol
TATulegulov Amandos
Tulegulov Amandos
NZNurtai Zhadira
Nurtai Zhadira
UZUssenlulov Zhenisbek
Ussenlulov Zhenisbek
The object of the study is the production of construction products with fillers from recycled wind turbine blades. The study solves the problem related to the possibility of using fillers from recycled wind turbine blades in the technological process of manufacturing construction products. According to the results of the study, concrete mixtures with the most optimal formulations that meet the requirements of state standards were classified, this was achieved due to effective indicators reflecting the characteristics of concrete mixtures. The developed algorithm of the technological process of production of building products was used in the development of the program code, this became possible due to the consideration of assumptions and limitations of the technological equipment used in production. The program for managing the technological process of manufacturing construction products is developed in C++, which does not require additional resources for auxiliary operations, has the ability to metaprogram and has the necessary performance. The adequacy of the model is ensured by the maximum approximation to real production. The effectiveness of research results in real production is explained by high-quality mixtures, dosage of ingredients, optimal parameters of technological equipment, process control based on data obtained by modeling, which reduces the number of defects and increases equipment productivity. The conditions for using the results of the study are the legislation of the country related to environmental requirements, as well as compliance with the technological process. For the resulting construction products, the bending strength increased by 20 % compared to traditional ones, the number of defects does not exceed 15 %, and equipment productivity increased by 12 %

22 December 2023 in Вестник КазУТБ
Verified
Journal Article
Open access
PDF file
KAK.M. Akishev
K.M. Akishev
ATA.T. Tulegulov
A.T. Tulegulov
KAK.Sh. Aryngazin
K.Sh. Aryngazin
VKV.I. Karpov
V.I. Karpov
ZNZh.T. Nurtai
Zh.T. Nurtai
To date, telecommunication technologies are used all over the world to obtain reliable information on the situations on the sown areas of farmers. Data is transmitted in real time, access to devices (sensors, drones, fixation equipment) must be provided on an ongoing basis. Information for dynamic tasks using big data consists of heavy content and requires data transmission at high speeds. One of the main components of modern information technologies is Internet access, which provides not only the entire process of data processing and analysis, but also timely management decision-making. As a rule, all information on objects (databases, knowledge) is placed on servers, access to which is possible only if there is a permanent service from potential customers in the area of operation of data fixation and transmission devices. The existing methods of visualizing objects using space satellites have disadvantages associated with limited residence time, image quality, and the need for manual processing. In this regard, the use of devices with Internet of Things technology support is relevant and timely, since data is captured in real time, data is relevant, the decision-making process can be carried out promptly and increases production efficiency and labor productivity. The article considers the possibilities of mobile communication networks of Kazakhstan to perform tasks related to obtaining data from Internet of Things devices, to analyze the data of forecast models on arable lands of grain-growing regions of the country, problems, possible solutions, principles of organization of an intelligent management decision-making system. На сегодняшний для получения достоверной информации по ситуациям на посевных площадях аграриев, во всем мире используются телекоммуникационные технологии. Данные передаются, в режиме реального времени, доступ к устройствам (датчики, дроны, аппаратура фиксации) должен обеспечиваться на постоянной основе. Информация для динамических задач с использованием больших данных, состоит из тяжелого контента и требует передачи данных на высоких скоростях. Одной из основных составляющих современных информационных технологий является доступ в интернет, с помощью которого обеспечивается не только весь процесс обработки и анализа данных, но и своевременное принятие управленческих решений. Как правило, вся информация по объектам (базы данных, знаний) размещается на серверах, доступ к которым возможен только при наличии постоянного сервиса у потенциальных клиентов в районе функционирования устройств фиксации и передачи данных. Существующие способы визуализации объектов с помощью космических спутников имеют недостатки, связанные с ограниченностью времени пребывания, качеством изображения, необходимостью обработки в ручном режиме. В этой связи использование устройств с поддержкой технологии интернета вещей, актуально и своевременно, так как данные снимаются в режиме реального времени, данные актуальны, процесс принятия решений может осуществляться оперативно и повышает эффективность производства и производительность труда. В статье рассмотрены возможности сетей операторов мобильной связи Казахстана по выполнению задач связанных с получением данных с устройств интернета вещей, для анализа данных прогнозных моделей на пахотных землях зерносеющих регионов страны, проблемы, возможные пути решения, принципы организации интеллектуальной системы принятия управленческих решений. Бүгінгі таңда фермерлердің егіс алқаптарындағы жағдайлар туралы сенімді ақпарат алу үшін бүкіл әлемде телекоммуникациялық технологиялар қолданылады. Деректер нақты уақыт режимінде беріледі, құрылғыларға (датчиктер, дрондар, бекіту аппаратурасы) қол жеткізу тұрақты негізде қамтамасыз етілуі тиіс. Үлкен деректерді пайдаланатын динамикалық тапсырмаларға арналған ақпарат ауыр мазмұннан тұрады және жоғары жылдамдықта деректерді беруді қажет етеді. Қазіргі заманғы ақпараттық технологиялардың негізгі компоненттерінің бірі интернетке қол...

31 March 2024 in Вестник КазУТБ
Verified
Journal Article
Open access
PDF file
КAК. Akishev
К. Akishev
АТА. Тylegulov
А. Тylegulov
ZNZh. Nurtai
Zh. Nurtai
EOE. Ospanov
E. Ospanov
КAК. Aryngazin
К. Aryngazin
UKU. Kurmanbek
U. Kurmanbek
The article describes the information and logical model (ILM) of the database of accounting and movement of equipment of wind turbines of the Ermentau wind farm in the Akmola region. IFM is implemented in accordance with the IDEF1X methodology. The relationships of entities are shown and analyzed, the types of connections, the use of primary and foreign keys are determined. The application of the IDEF1X methodology used in the development of relational databases is shown, the conditional syntax is specially designed to build a conceptual scheme. The advantages of the IDEF1X methodology are described. В статье описана информационно-логическая модель (ILM) базы данных учета и перемещения оборудования ветрогенераторов Эрментауской ветроэлектростанции в Акмолинской области. IFM реализована в соответствии с методологией IDEF1X. Показаны и проанализированы взаимосвязи сущностей, определены типы соединений, использование первичного и внешнего ключей. Показано применение методологии IDEF1X, используемой при разработке реляционных баз данных, специально разработан условный синтаксис для построения концептуальной схемы. Описаны преимущества методологии IDEF1X. Мақалада Ақмола облысындағы Ерментау жел электр станциясының жел генераторларының жабдықтарын есепке алу және жылжыту дерекқорының ақпараттық-логикалық моделі (ILM) сипатталған. IFM idef1x әдіснамасына сәйкес жүзеге асырылады.нысан қатынастары көрсетілген және талданған, қосылым түрлері, бастапқы және сыртқы кілттерді қолдану анықталған. Реляциялық мәліметтер базасын жасауда қолданылатын idef1x әдіснамасын қолдану көрсетілген, тұжырымдамалық схеманы құру үшін шартты синтаксис арнайы жасалған. Idef1x әдістемесінің артықшылықтары сипатталған.