1 October 2025 in Physics of Fluids
High-fidelity computational aeroacoustics simulations encounter significant challenges in industrial applications, especially in high Reynolds number flow regimes. These difficulties arise primarily from stringent requirements imposed by the Courant–Friedrichs–Lewy condition and the near-wall grid spacing, leading to prohibitively high computational costs. To address this limitation, this study presents a novel slip boundary condition for wall-modeled large eddy simulation that employs high-order finite-difference methods based on the dispersion-relation-preserving scheme. The slip boundary condition prescribes the tangential velocity at solid walls while enforcing zero normal penetration. The slip velocity is derived from a linearized near-wall velocity profile approximation at the sample point, significantly reducing grid resolution requirements. The slip boundary condition is first validated in turbulent channel flows at Reτ=2000 with optimized grid spacings (δ/Δx=20, δ/Δz=30, δ/Δy=20–30, δ: boundary-layer thickness), yielding mean velocity profiles and Reynolds stresses that closely match direct numerical simulation (DNS) benchmarks. Additionally, errors in the low-to-mid frequency components of the power spectral density remain within 3–6 dB. The optimized grid spacings are further validated over a range of friction Reynolds numbers (Reτ=576–5100). Besides, a synthetic turbulence inflow method is developed by superimposing divergence-free, spatially correlated steady jet structures onto the mean flow, integrated with the radiation nonreflective boundary conditions. The time-invariant source terms maintain computational efficiency while effectively suppressing spurious numerical oscillations. The synthesized velocity profiles and Reynolds stresses show excellent agreement with DNS data. While the spectra exhibit overprediction in amplitude, the characteristic shape maintain consistency with Goody's empirical model.
1 June 2026 in AIP Advances
Simulating flow separation in turbulent flows at high Reynolds numbers remains a significant challenge for high-order finite-difference methods. This study introduces a non-equilibrium slip boundary condition, integrated into a wall-modeled large-eddy simulation framework, to address this issue. By explicitly incorporating the tangential pressure gradient and a consistent eddy-viscosity closure, the proposed model effectively mitigates a key limitation of conventional equilibrium wall models (EQWMs) in separated flow regimes. Initial validation in an equilibrium channel flow demonstrates that the non-equilibrium wall model (NEQWM) achieves accuracy comparable to that of the EQWM. In contrast, for separated flow over periodic hills, the EQWM fails to capture the separation bubble, while the NEQWM provides substantially improved predictions of both the mean flow and turbulence statistics. Grid-resolution studies at Reh = 10 600 reveal that mean velocity profiles exhibit weak dependence on grid resolution. In comparison, predictions of the pressure coefficient and turbulent fluctuations improve notably with mesh refinement, particularly near the separation point and within the recirculation region. Velocity spectra in the shear layer confirm that the resolved turbulence in the outer layer is physically consistent and that the wall model does not artificially suppress large-scale turbulent dynamics. Simulations at higher Reynolds numbers confirm the robustness of the model in capturing correct scaling behavior for mean and fluctuating quantities, including the upstream shift of the reattachment location with increasing Reynolds number.