Resumen Las soluciones constructivas tradicionales y contemporáneas han demostrado tener serias limitaciones en la solución del déficit cualitativo y cuantitativo de la vivienda y el equipamiento, de igual manera, las evidencias del desempeño térmico son igualmente desalentadoras. Es por lo que se indaga sobre la capacidad de la tierra alivianada de brindar confort térmico en los edificios, considerando los diferentes climas del territorio peruano y comparándola con los sistemas constructivos más comunes en el medio: el adobe y la albañilería de ladrillo. A partir de la caracterización previa de las cualidades térmicas de los componentes y de la realización de simulaciones térmicas dinámicas, comparando el desempeño de diferentes prototipos digitales, se identificaron las virtudes de la tierra alivianada por el marcado equilibrio entre una masa térmica media y una conductividad térmica relativamente baja, siendo los únicos que logran cumplir con las exigencias de la actual norma peruana de eficiencia energética para el caso de los climas más fríos. Adicionalmente de destaca la composición a partir de materiales naturales, renovables y biodegradables que son ventajas ecológicas. Palabras clave: arquitectura bioclimática; arquitectura sostenible; climatización pasiva; confort térmico; inercia térmica; simulación térmica; sistema constructivo; transmitancia térmica Abstract Traditional and contemporary construction systems have shown serious limitations in the solution of the qualitative and quantitative deficit of housing and equipment, in the same way, the evidence of thermal performance is equally discouraging. That is why we inquire about the ability of the land relieved to provide thermal comfort in buildings, considering the different climates of the Peruvian territory and comparing it with the most common construction systems in the environment: adobe and brick masonry. From the previous characterization of the thermal qualities of the components and the realization of dynamic thermal simulations, comparing the performance of different digital prototypes, the virtues of the earth alleviated by the marked balance between a medium thermal mass and a conductivity were identified relatively low thermal, being the only ones that manage to meet the requirements of the current Peruvian energy efficiency standard in the case of colder climates. In addition, the composition from natural, renewable and biodegradable materials that are ecological advantages stands out. Keywords: bioclimatic architecture; sustainable architecture; passive air conditioning; Thermal comfort; thermal inertia; thermal simulation; construction system; thermal transmittance. Recibido: febrero 25 / 2019 Evaluado: septiembre 20 / 2019 Aceptado: noviembre 23 / 2019 Publicado en línea: noviembre de 2019 Actualizado: noviembre de 2019
Cold indoor environments in rural Andean housing raise concerns about thermal comfort, yet the applicability of existing comfort models to these contexts remains insufficiently examined. This study has compared predictions from five thermal comfort models, including PMV, aPMV, and regional approaches, against field data. Data were collected from 154 residents of Langui (3,969 m.a.s.l.) through culturally adapted surveys and environmental measurements. The aPMV model showed the highest agreement with thermal sensation votes, achieving 58.4% accuracy (±1 category), and enabled the definition of a comfort range between 14 °C and 25 °C. The results emphasize the need for local design criteria that address cold indoor conditions in Andean housing.
In Peru, there are few studies that systematically address the issue of high-Andean rural housing. This study is based on the survey and diagnosis of 26 rural houses in Langui, Cusco, with the aim of characterizing them from a typological, constructive, and contextual perspective. The data collection was carried out through analysis sheets, interviews, measurements, and photographic records; the information was then systematized and analyzed. The study concludes that rural housing in Langui is productive, evolutionary, and naturally absorbs changes due to external interventions, such as the increased availability of industrial materials or the insertion of government-built housing modules.