16 May 2025 in Science Advances
Resistive switching devices are promising candidates for the next generation of nonvolatile memory and neuromorphic computing applications. Despite the advantages in retention and on/off ratio, filamentary-based memristors still suffer from challenges, particularly endurance (flash being a benchmark system showing 10 4 to 10 6 cycles) and uniformity. Here, we use WO 3 as a complementary metal-oxide semiconductor–compatible switching oxide and demonstrate a proof-of-concept materials design approach to enhance endurance and device-to-device uniformity in WO 3 -based memristive devices while preserving other performance metrics. These devices show stable resistive switching behavior with >10 6 cycles, >10 5 -second retention, >10 on/off ratio, and good device-to-device uniformity, without using current compliance. All these metrics are achieved using a one-step pulsed laser deposition process to create self-assembled nanocomposite thin films that have regular guided filaments of ≈100-nanometer pitch, preformed between WO 3 grains and interspersed smaller Ce 2 O 3 grains.
6 April 2026 in Communications Materials
Oxide-based memristors are promising candidates as neuromorphic hardware in energy-efficient edge computing applications for the Internet of Things (IoT). However, achieving simultaneously optimized memristive and synaptic performance with low-temperature fabrication, compatible with complementary metal-oxide-semiconductor (CMOS) processes, remains a challenge. Here, we demonstrate a dual-function electrode selection strategy—controlled oxygen vacancy electrode reservoir—implemented in a simple, low-temperature-fabricated indium tin oxide (ITO)/WO 3 /TiN thin film system. We systematically vary the oxygen stoichiometry in the ITO top electrode, which serves not only as an electrical contact, but also as a dynamic oxygen reservoir. A high oxygen-vacancy concentration in the ITO enables optimized memristive performance of low electroforming and operation voltages, and robust memristive and synaptic endurance. This electrode-focused defect engineering approach offers a versatile route to advanced memristor design, enabling many applications in IoT and neuromorphic systems.
6 April 2026 in Applied Physics Letters
Interest in ferroelectric materials for processing, memory, and sensing devices has been re-energized in recent years by the discovery of nanoscale ferroelectricity in insulating binary oxides based on hafnia and zirconia deposited in complementary metal-oxide-semiconductor-compatible processes. However, their large bandgap, very limited doping range, and challenges of high coercive voltage leave the search open for an industry-friendly, low-coercive-voltage, semiconducting ferroelectric for photosensitive and resistive-switching applications. Here, we report the deposition of epitaxial WO3 films at 350°C using a chemical atmospheric process. In these films, anisotropic epitaxial strain imposed by the substrate promotes the stabilization of a polar phase at room temperatures with out-of-plane polarization, evidenced by x-ray diffraction, scanning transmission electron microscopy, piezoresponse force measurements, and Raman spectroscopy. Exploring ferroelectricity in ultrathin epitaxial WO3 films could provide a platform for polarization-controlled electronic and optical applications.
24 October 2025 in Research Square
Hafnia-based ferroelectrics have attracted significant interest for their scalability and compatibility with complementary metal-oxide-semiconductor (CMOS) technology for memory applications. However, the imprint and fatigue behaviour remain critical challenges, particularly in electrode-integrated devices. By investigating Y-doped HfO 2 films with various top electrodes (Pt, Cu, W, Mo, Ni, and Al), this study reveals that the fatigue performance is determined by the interplay between the metal work function and chemical stability through extended Frenkel pairs formation at the interface. Moreover, YHO with Ni top electrodes undergoes a unique ferroelectric failure from ferroelectric switching to filamentary conduction under electrical cycling, driven by extended Frenkel pair defects redistribution. Electrodes with high extended Frenkel pair formation energy enable YHO capacitors to maintain nearly unchanged ferroelectric polarization after 10 8 switching cycles. Our findings show that charged defect formation, rather than intrinsic work function, determines interfacial band bending and the Schottky barrier. This work highlights the importance of interface engineering for enhancing the fatigue performance and the reliability of HfO 2 -based ferroelectrics for memory applications.