Centro de Innovación y Desarrollo Tecnológico en Cómputo, Red de Expertos en Robótica y Mecatrónica, Instituto Politécnico Nacional, Mexico City 07700, Mexico
Auto-generated profile, based on publicly available information
Saul Enrique Benitez-Garcia
Centro de Innovación y Desarrollo Tecnológico en Cómputo, Red de Expertos en Robótica y Mecatrónica, Instituto Politécnico Nacional, Mexico City 07700, Mexico
The structural complexity of the bipedal locomotion may be reduced by using mechanisms with fewer actuators, which ideally do not degrade the performance and functionality of the robot. However, when the mechanism design considers conflicting design objectives, the search for design solutions with specific trade-offs becomes hard. This work studies different multi-objective search approaches the dominance-based, the decomposition-based and the metric-driven in the dimensional synthesis of the eight-bar mechanism for the bipedal locomotion application in the sagittal plane stated as a mixed discrete-continuous nonlinear multi-objective optimisation problem. This work also proposes a dominance-based multi-objective differential evolution algorithm called Multi-Objective Specialist Population-based Differential Evolution (MOSPDE), which endows specialised subpopulations to exploit different regions of the Pareto front to favour the search for design trade-offs with a suitable generation of the gait and force transmission during the stance phase. The comparative study includes algorithms reported in the specialised literature based on dominance (MOPSO, MODE variants and NSGA-II), decomposition (MOEA/D-DE) and metric-driven (SMS-EMOA). The statistical analysis reveals that using the Pareto dominance search approach based on differential evolution and the inclusion of exhaustive exploitation can promote the reconfigurability of the bipedal locomotion mechanism with better trade-offs that satisfy the conflicting design objectives.
This paper proposes a periodic event-triggered control (PETC) design applied to nonlinear robotic systems for joint space stabilization. The update of the control signal is based on a predefined triggering mechanism that periodically considers state measurements. So, continuous state measurements required in the continuous event-triggered control (CETC), are no longer needed in this proposal. The main advantages of the proposal are: 1) to assure the convergence of the closed-loop trajectories to a compact ball centered in the origin of the error space, and 2) the relaxation of continuous measurements for the evaluation of the event condition which implies a more suitable design for real-time implementation purposes. Experimental comparative results of the proposed design with a time-triggered control (TTC) scheme show that the PETC can present suitable performance with a significant reduction of 82.20% of the controller updates mainly given in the steady-state of the closed-loop system. This implies a decrement of the computation resources due to information transfer.
Robotic systems operating in complex environments require optimized tuned interaction controllers to ensure accurate task execution while maintaining smooth and safe behavior. This paper presents a scalarized multi-objective tuning approach based on Differential Evolution (DE) to optimize robot–environment interaction control. The method balances trajectory tracking accuracy and control smoothness using repulsive forces derived from potential fields modeled as virtual springs. The approach is validated on a (3,0) omnidirectional mobile robot navigating predefined trajectories with obstacles. A comparative study of five DE variants shows that DE/best/1/bin and DE/best/1/exp offer the best performance. Simulation and experimental results, including validation with an actual force sensor, confirm the method’s effectiveness and applicability in scenarios with limited sensing capabilities or model uncertainty.
In the classical approach of Time-Triggered Control (TTC), the control signal is updated at each sampling time as well as the system states to be controlled, which could imply a redundancy in the computational calculation as well as in the transfer of information in the regulation objective. On the other hand, the Event-Triggered Control (ETC) approach performs the same task in an asynchronous way, i.e,, it only updates the control signal when a performance requirement is violated and the states are updated at each sampling time. This reduces the amount of computational calculation without affecting the performance of the closed loop system. For this reason, in the present work the ETC is developed for the stabilization of a manipulator robot with three Degree of Freedom (DoF) in the joint space where a Lyapunov Control Function (LCF) is proposed to formulate the event function (e¯), which indicates whether or not is required the control signal updating. Simulation results show the reduction of the updates compared with a TTC.