Baptiste Leconte

Baptiste Leconte

Auto-generated profile, based on publicly available information

Baptiste Leconte

BLOOM Lasers

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 April 2018 in Optics Express
Verified
Journal Article
Closed access
PDF file
BLBaptiste Leconte
Baptiste Leconte
HGHervé Gilles
Hervé Gilles
TRThierry Robin
Thierry Robin
BCBenoit Cadier
Benoit Cadier
MLMathieu Laroche
Mathieu Laroche
We present the first frequency-doubled neodymium-doped fiber laser generating multi-watt CW power near 450 nm. A bow-tie resonator incorporating a LBO nonlinear crystal is integrated within a Nd-doped fiber laser emitting near 900 nm. This scheme achieves an IR to blue conversion efficiency close to 55% without any active control of the internal resonant cavity. As a result, up to 7.5 W of linearly-polarized blue power is generated, with beam quality factors Mx2 ~1.0 and My2 ~1.5. A simple numerical model has been developed to optimize and analyse the IR to blue conversion efficiency in the resonant cavity. Performance limitations and prospects for further improvements are discussed.

27 August 2015 in Optics Letters
Verified
Journal Article
Closed access
PDF file
BLB. Leconte
B. Leconte
BCB. Cadier
B. Cadier
HGH. Gilles
H. Gilles
Sylvain GirardSylvain Girard
Sylvain Girard
TRThierry Robin
Thierry Robin
MLM. Laroche
M. Laroche
Efficient operation of an Nd-doped fiber laser operating in a wavelength-tunable configuration using a volume Bragg grating (VBG) is reported in this Letter. A high-power operation on the F3/24−I9/24 transition of Nd3+ at short wavelengths below 900 nm is demonstrated for the first time in silica fibers. A high-efficiency (47% laser conversion) output power up to 22 W and a narrow linewidth of 0.035 nm are achieved. This configuration is compared with a more conventional fiber laser setup using a bandpass filter and a highly reflective dichroic mirror.

15 June 2021 in Optics Letters
Verified
Journal Article
Closed access
MMMarie-Alicia Malleville
Marie-Alicia Malleville
BLBaptiste Leconte
Baptiste Leconte
RDRomain Dauliat
Romain Dauliat
RJRaphaël Jamier
Raphaël Jamier
ASAnka Schwuchow
Anka Schwuchow
PRPhilippe Roy
Philippe Roy
To prevent the thermally induced spatial beam degradation occurring in high-power fiber lasers and amplifiers, index-depressed core “fully aperiodic large-pitch fibers” (FA-LPFs) have been designed and fabricated. In contrast to previous experimental works performed on FA-LPFs, in which the active core and the surrounding cladding material are quasi-index-matched, the core refractive index is in slight depression compared to the surrounding material ( Δ n ≈ − 3 × 10 − 5 ). Thus, the index-depressed fiber core tends first to behave as an anti-guide, preventing light from being properly guided into it. However, by increasing the absorbed pump power, the thermal load induces a parabolic refractive index change sufficient to compensate for the − 3 × 10 − 5 index depression in the core, enabling a robust single-mode amplification at high average power. As a proof of concept, using a 110 µm depressed core FA-LPF, M 2 values of 1.3 were demonstrated in amplifier configuration from 60 W to a maximal value of 170 W of emitted average power only limited by the available pump power.

18 September 2019 in Optics Letters
Verified
Journal Article
Closed access
PDF file
MSMostafa Sabra
Mostafa Sabra
BLBaptiste Leconte
Baptiste Leconte
RDRomain Dauliat
Romain Dauliat
DDDia Darwich
Dia Darwich
TTTobias Tiess
Tobias Tiess
PRPhilippe Roy
Philippe Roy
We demonstrate a widely tunable Q-switched dual-wavelength fiber laser emitting synchronized pulses in the 2 μm spectral range. Owing to the use of a Tm-doped rod-type fully aperiodic large pitch fiber, together with an acousto-optic modulator and two volume Bragg gratings (VBGs), the wavelength separation was shown to be continuously tunable from 1 to 120 nm (∼0.1−10  THz). A peak power higher than 8 kW was demonstrated over the whole tuning range for a repetition rate (RR) of 1 KHz and a 26 ns pulse duration. The RR was modulated from 1 to 30 kHz, and the laser pulse duration measured between 23 ns and 130 ns, depending on the RR and the wavelength separation.

3 October 2018 in Applied Optics
Verified
Journal Article
Closed access
PDF file
RJRémi du Jeu
Rémi du Jeu
RDRomain Dauliat
Romain Dauliat
BLBaptiste Leconte
Baptiste Leconte
MMMarie-Alicia Malleville
Marie-Alicia Malleville
RJRaphaël Jamier
Raphaël Jamier
PRPhilippe Roy
Philippe Roy
Based on a special large-pitch architecture that has already proved its single-mode single-polarization behavior in a passive configuration, two ytterbium-doped versions of such large-mode-area fibers have been fabricated and tested in both laser and amplification configurations for high-power laser source applications. Due to the high sensitivity of large-pitch fiber design to the active-core-to-passive-cladding index mismatch, the realization of a single-polarization structure is highly challenging. However, we report on the preservation of a polarization-maintaining feature. A linear polarization with an extinction ratio of 17 dB is demonstrated for mode field diameters reaching up to 58 μm as long as the single-modeness of the emitted signal is preserved.

28 February 2025 in Optics Letters
Verified
Journal Article
Closed access
JPJonathan Pouillaude
Jonathan Pouillaude
PPPierre Pichon
Pierre Pichon
XDXavier Delen
Xavier Delen
PRPhilippe Roy
Philippe Roy
BLBaptiste Leconte
Baptiste Leconte
LLLaurent Lombard
Laurent Lombard
This work compares several Yb-doped large mode area (LMA) fiber amplifiers operating in the ∼50 ns regime at 1030 nm designed for airborne wind lidar application. The sinusoidal phase modulation applied to the signal enhances the SBS threshold by a factor 8.8 compared to a single frequency operation while still complying with lidar receiver spectral requirements. By combining this modulation with short, highly doped LMA fibers, more than 10 kW output peak power has been reached for 50 ns pulses at 40 kHz repetition rate.