Ran Cao

Ran Cao

Auto-generated profile, based on publicly available information

Ran Cao

Associate Professor, College of Civil Engineering, Hunan Univ., Changsha 410082, China. ORCID:

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2019 in Journal of Bridge Engineering
Verified
Journal Article
Closed access
RCRan Cao
Ran Cao
AAAnil Kumar Agrawal
Anil Kumar Agrawal
SESherif El-Tawil
Sherif El-Tawil
XXXiaochen Xu
Xiaochen Xu
WWWaider Wong
Waider Wong
The vast majority of research studies on vehicular collision with bridge piers have been carried out with single-unit trucks, which are typically classified as medium-duty vehicles weighing about 90 kN (20,000 lb). Yet, collision events that involve severe bridge damage are generally caused by heavy-duty trucks, generally tractor-semitrailers weighing 360 kN (80,000 lb). The handful of tests that were conducted to study heavy truck collisions used rigid piers, which means that the energy absorption potential of the piers, and their failure mechanisms, were neglected. In this study, validated, high-fidelity finite-element simulations of collisions between heavy-duty tractor-semitrailers and reinforced concrete bridge piers have been carried out to investigate the demands imposed upon, and the damage modes of, concrete piers. Trucks with three different weights and piers with six different configurations were used in the simulations. The approach speeds for the trucks ranged from 48 to 113 km/h. The simulation results showed that impact from the engine block usually delivered the highest peak force, which was closely associated with the impact velocity of the vehicle. Once the pier’s resistance has been compromised by this event, the subsequent trailer impact, which has a lower force demand but longer duration, causes further significant damage or even destroys the pier. The current provisions regarding vehicular impact demands in AASHTO requirements are critiqued based on the results of parametric simulations using the heavy truck model.

1 July 2019 in Journal of Bridge Engineering
Verified
Journal Article
Closed access
RCRan Cao
Ran Cao
SESherif El-Tawil
Sherif El-Tawil
AAAnil Kumar Agrawal
Anil Kumar Agrawal
XXXiaochen Xu
Xiaochen Xu
WWWaider Wong
Waider Wong
Heavy trucks, such as tractor–semitrailers weighing up to 360 kN, represent a serious collision hazard for unprotected bridge piers. Current specifications recommend designing a bridge pier vulnerable to vehicular impacts for a static force of 2,670 kN applied on the pier at a specified height. However, the impact load delivered by a heavy truck is dynamic and not applied at a single height during the crash process. High-fidelity computational simulation is used to gain insight into how force is delivered to a bridge pier during a crash. The impact force time histories generated during a collision are simplified into a series of triangular pulse functions applied at various heights. Key parameters defining the pulse models are truck weight, approach speed, and pier size. The values of these parameters are derived from numerical regression based on the simulation results. By comparing pier damage modes and deformation profiles, the proposed pulse model is demonstrated to be able to accurately represent the truck impact demands. We have proposed a capacity design philosophy to mitigate the effects of shear failure. We revealed that piers designed according to the proposed philosophy are less likely to fail in shear compared with regular piers. We asserted that together, the simple pulse model and proposed capacity design approach can serve as a basis for future performance-based design provisions for bridge piers subjected to heavy truck impact.

1 July 2019 in Journal of Bridge Engineering
Verified
Journal Article
Closed access
RCRan Cao
Ran Cao
AAAnil K. Agrawal
Anil K. Agrawal
SESherif El-Tawil
Sherif El-Tawil
XXXiaochen Xu
Xiaochen Xu
WWWaider Wong
Waider Wong
A performance-based design (PBD) framework, suited for incorporation into design codes, is proposed for bridge piers subject to truck impact. Pier performance was judged as a function of shear distortion and plastic rotation at key locations along the pier. Calibrated pulse models were used to compute the demand imposed by a single-unit truck or a tractor-semitrailer colliding with a concrete bridge pier. Capacity design concepts, similar to those in earthquake engineering, were also incorporated into the proposed performance-based approach to mitigate collapse by minimizing shear distortion of piers impacted by trucks. Based on the computational data, the argument is made that adopting the proposed PBD theory for impact-resistant pier design can allow bridge designers to meet predetermined performance objectives for given vehicular impact scenarios.

1 January 2020 in Journal of Bridge Engineering
Verified
Journal Article
Closed access
RCRan Cao
Ran Cao
SESherif El-Tawil
Sherif El-Tawil
AAAnil Kumar Agrawal
Anil Kumar Agrawal
On March 15, 2018, a pedestrian concrete truss bridge in Miami, Florida, collapsed during construction. The failure of this bridge caused multiple casualties and raised many serious concerns regarding the design and construction of the bridge, including the emerging concept of accelerated bridge construction (ABC). The causes of failure of this bridge have not yet been comprehensively investigated. This paper used high-fidelity computational simulation to investigate the behavior of critical structural members of the bridge during construction. Four important construction stages (prestressing, transportation, relocation, and retensioning) were simulated to identify dominant factors that could have contributed to the failure of the bridge. A recent investigation report from the National Transportation Safety Board (NTSB) attributed the collapse to flawed design at the failed joint at the northern end of the bridge, but the specific sequence of mechanisms that led to collapse was not identified. Based on simulation and demand/capacity analysis, this work shows that the horizontal component of the retensioning force overcame the resistance of the joint and caused it to slide with respect to the deck. As sliding progressed, dowel action between the deck and joint became fully mobilized, crushing and damaging concrete locally within the joint and the deck. The evolving damage (to the cold joint and adjacent joint and deck concrete) prompted more sliding and led to a vicious cycle that culminated in the collapse of the entire bridge. Parametric studies investigated the effects of the coefficient of friction at the cold joint, prestressing forces in the deck, and retensioning forces applied to the northern diagonal member on the collapse behavior of the bridge. The results from the analysis and simulations provide important insights into the collapse mechanism and highlight lessons that could be learned for preventing similar catastrophic failures in the future.

1 June 2019 in Journal of Bridge Engineering
Verified
Journal Article
Closed access
XXXiaochen Xu
Xiaochen Xu
RCRan Cao
Ran Cao
SESherif El-Tawil
Sherif El-Tawil
AAAnil Kumar Agrawal
Anil Kumar Agrawal
WWWaider Wong
Waider Wong
Computational simulation was used to investigate the collision process between medium-weight, single-unit trucks and reinforced concrete bridge piers. The simulation results were used to formulate and calibrate a pulse model to describe, in a simplified manner, the dynamic force demands imposed on a bridge pier by a colliding truck. Key parameters in the force demand model were impact speed, truck weight, and pier dimensions. Accuracy of the proposed demand model was assessed by comparing the damage modes and displacement profiles of piers subjected to impact by the computational truck model and an equivalent, simplified pulse model. Extensive numerical simulations were carried out using the developed pulse model to identify prominent failure mechanisms. Damage levels were quantified through the use of macrolevel deformation parameters, such as plastic rotation and shear distortion. It was shown that shear damage can be substantially reduced by using capacity design theory to proportion the piers.

1 July 2020 in Journal of Bridge Engineering
Verified
Journal Article
Closed access
PDF file
RCRan Cao
Ran Cao
AAAnil Kumar Agrawal
Anil Kumar Agrawal
SESherif El-Tawil
Sherif El-Tawil
WWWaider Wong
Waider Wong
In January 2016, the FHWA and AASHTO announced a joint agreement that only bridge railing and longitudinal barriers evaluated using the 2016 edition of Manual for Assessing Safety Hardware (MASH) will be allowed for new permanent installations after December 31, 2019. However, in the current AASHTO-LRFD, railing design forces and their applications for concrete barriers have not been updated to MASH requirements, and the detailed impact process of the MASH truck on concrete barriers has not been systematically investigated. In most of the previous studies on MASH truck impacts, the concrete barrier had been assumed to be a rigid structure capable of sustaining a vehicular impact without any significant damage. This assumption neglects the deformation of the barrier and does not improve our understanding on the barrier's failure mechanisms. In this study, high-fidelity finite-element simulations have been carried out to investigate the demands imposed upon, and damage modes of, MASH TL-4 and TL-5 concrete barriers. An inelastic pushover analysis approach is proposed for the evaluation of the capacity of these concrete barriers. Based on the damage mode observed from the pushover analysis, a modified yielding line method (MYLM) is proposed for estimating the capacity of concrete barriers. It is observed that the capacity of concrete barriers estimated by the proposed MYLM matches with that from the pushover analysis quite well and it is generally much higher than from the current AASHTO-LRFD specifications.