7 July 2023 in Journal of Energy Chemistry
16 February 2022 in ACS Applied Electronic Materials
7 January 2022 in Energy Material Advances
Since future energy harvesting technologies require stable supply and high-efficiency energy conversion, there is an increasing demand for high-performance organic thermoelectric generators (TEGs) based on waterproof thermoelectric materials. The poor stability of n-type organic semiconductors in air and water has proved a roadblock in the development of reliable thermoelectric power generators. We developed a simple green route for preparing n-type carbon nanotubes (CNTs) by doping with cationic surfactants and fabricated films of the doped CNTs using only aqueous media. The thermoelectric properties of the CNT films were investigated in detail. The nanotubes doped using a cationic surfactant (cetyltrimethylammonium chloride (CTAC)) retained an n-doped state for at least 28 days when exposed to water and air, indicating higher stability than that for contemporary CNT-based thermoelectric materials. The wrapping of the surfactant molecules around the CNTs is responsible for blocking oxygen and water from attacking the CNT walls, thus, extending the lifetime of the n-doped state of the CNTs. We also fabricated thermoelectric power conversion modules comprising CTAC-doped (n-type) and sodium dodecylbenzenesulfonate- (SDBS-) doped (p-type) CNTs and tested their stabilities in water. The modules retained of their initial maximum output power (at a temperature difference of 75°C) after being submerged in water for 30 days, even without any sealing fills to prevent device degradation. The remarkable stability of our CNT-based modules can enable the development of reliable soft electronics for underwater applications.
13 January 2023 in Journal of Colloid and Interface Science
4 June 2025 in Journal of Colloid and Interface Science
5 December 2022 in Carbon Energy
Flexible p–n thermoelectric generator (TEG) technology has rapidly advanced with power enhancement and size reduction. To achieve a stable power supply and highly efficient energy conversion, absolute chemical stability of n‐type materials is essential to ensuring large temperature differences between device terminals and ambient stability. With the aim of improving the long‐term stability of the n‐type operation of carbon nanotubes (CNTs) in air and water, this study uses cationic surfactants, such as octylene‐1,8‐bis(dimethyldodecylammonium bromide) (12–8–12), a gemini surfactant, to stabilize the nanotubes in a coating, which retains the n‐doped state for more than 28 days after exposure to air and water in experiments. TEGs with 10 p–n units of 12–8–12/CNT (n‐type) and sodium dodecylbenzene sulfonate/CNT (p‐type) layers are manufactured, and their water stability is evaluated. The initial maximum output of 16.1 µW (75 K temperature difference) is retained after water immersion for 40 days without using a sealant to prevent TEG module degradation. The excellent stability of these CNT‐based TEGs makes them suitable for underwater applications, such as battery‐free health monitoring and information gathering systems, and facilitates the development of soft electronics.