15 November 2022 in Applied Surface Science
1 February 2023 in Journal of the Electrochemical Society
To investigate aging effect on the passive film of Ni23Cr15Mo and Ni22Cr9Mo3Nb, synchrotron-based X-ray photoelectron spectroscopy (XPS) was used to analyze the structure and composition of the air-formed passive film on the alloys. The corrosion resistance of the two Ni alloys in 1 M NaCl solution was evaluated with electrochemical cyclic polarization measurement. The synchrotron XPS measurement provided detailed information about chemical states of alloying elements in the passive film, showing that the passive film consists of an inner oxide layer and an outer hydroxide layer. The XPS data allowed precise determination of the chemical composition and the thickness of the outer hydroxide layer, the inner oxide layer, and the underlying subsurface alloy layer. The Cr-oxide in the inner layer grows thicker with aging time, leading to Cr-depletion in the subsurface region. Mo and Nb in the alloy form mixed oxides and hydroxides, and aging in air leads to transformation of the lower valence oxides into higher valence oxides. The freshly formed oxide film exhibits similar barrier properties as the aged oxide film. The stability of the passive film formed on Ni22Cr9Mo3Nb seems to be better than that on Ni23Cr15Mo.
17 April 2024 in npj Materials Degradation
Corrosion results in large costs and environmental impact but can be controlled by thin oxide films that passivate the metal surfaces and hinder further oxidation or dissolution in an aqueous environment. The structure, chemistry, and thickness of these oxide films play a significant role in determining their anti-corrosion properties and the early-stage oxidation dynamics affect the properties of the developed oxide. Here, we use in situ X-ray Photoelectron Spectroscopy (XPS) to study the early-stage oxidation of a Ni-Cr-Mo alloy at room temperature and up to 400 °C. Cr and Mo begin to oxidize immediately after exposure to O2, and Cr3+, Mo4+, and Mo6+ oxides are formed. In contrast, Ni does not contribute significantly to the oxide film. A self-limiting oxide thickness, which did not depend on temperature below 400 °C, is observed. This is attributed to the consumption of available Cr and Mo near the surface, which results in an enrichment of metallic Ni under the oxide. The self-limited oxide thickness is 6–8 Å, which corresponds to 3–4 atomic layers of cations in the oxide. At 400 °C, sublimation of Mo6+ oxide is observed, resulting in the formation of an almost pure layer of Cr2O3 on the alloy surface. Lastly, a mechanism is presented that explains the formation of the bi-layer oxide structure observed for Ni-Cr-Mo alloys, which involves the enhanced migration of hexavalent Mo ions in the electric field, which drives mass transport during oxidation according to both the Cabrera Mott model and the Point Defect Model.
5 December 2025 in Corrosion Communications
14 April 2026 in Journal of the Electrochemical Society
Under electrochemical polarization, many electrocatalysts can undergo oxidation that alters their reactivity and can lead to restructuring and dissolution. In this context, the structure-property relationships of electrocatalysts, as well as their kinetics and dynamic behaviour, are still poorly understood. This knowledge gap mainly relies on the limitations of many traditional spectroscopic and structure determination methods, which cannot be easily coupled in situ with electrochemical methods. In this work, we performed cyclic voltammetry (CV) combined with 2D surface optical reflectance (2D-SOR) and total reflection X-ray absorption spectroscopy (RefleXAFS) in a single operando experiment, to directly follow the electro-oxidation and reduction of a Au(111) model electrode. Our results show that the surface in 0.05 M H 2 SO 4 forms a self-limiting Au 3+ oxide or hydroxide film around 1.5 V RHE during the anodic scan in the CV (2 mV s −1 ), with a thickness of ∼5 Å estimated from the 2D-SOR measurements. The film is then rapidly reduced during the cathodic scan around 1.1 V RHE .