21 July 2020 in KSCE Journal of Civil Engineering
The acoustic emission (AE) technique has been widely used to monitor damage for concrete structures in underground space. To analyze the damage status successfully, it is important to understand the characteristics of AE parameters during failure for concrete-based-underground structures. The AE parameters are related to the target material characteristics (i.e., sand content ratio) and failure steps (i.e., stress levels) of concrete specimens. In this study, the concrete specimens were prepared with different sand content ratio. Uniaxial compressive tests were performed for the specimens with AE monitoring to investigate the characteristics of AE parameters in the time domain (i.e., count, energy, and amplitude) and frequency domain (i.e., initial frequency and peak frequency). The experimental results were analyzed with the sand content ratio and failure step (1–4) in order to determine the suitable AE parameter as a monitoring index. The most suitable parameter was shown as the cumulative energy parameter of AE with high sensitivity.
29 January 2026 in Results in Engineering
4 May 2026 in SSRN Electronic Journal
Overbreaks during drill-and-blast tunnel excavation directly affect the construction stability, support requirements, and project cost. However, quantitative validation of the influence of rock-mass–classification parameters on the overbreak, using systematic field data remains limited. This study investigates the relationships between the rock mass rating (RMR) parameters and overbreak using 3,369 face-mapping records collected from a 5,098 m long NATM tunnel constructed in gneissic formations in South Korea. Pearson correlation and regression analyses are performed to evaluate individual and combined parameter effects. Results indicate that no single RMR parameter exerts strong linear control on overbreak; instead, discontinuity-related and groundwater-related parameters demonstrate greater influence within a multivariate framework. A simplified regression model incorporating rock-quality designation, discontinuity conditions, groundwater conditions, and joint orientation adjustment achieves a prediction performance comparable to that of the full model, while reducing parameter redundancy. Comparison with conventional design practice reveals that the empirical designs systematically underestimate the overbreak, whereas the proposed regression-based approach significantly improves the consistency with field measurements and reduces the potential treatment-cost risk. The proposed framework provides a statistically validated and field-calibrated methodology for improving overbreak prediction under geological conditions representative of the study site in South Korea.