9 October 2022 in Fundamental and Applied Hydrophysics
The complex processing of data from the shipborne lidar survey of the Black Sea coastal areas was carried out. In this area, internal waves are often observed according to contact and satellite observations. The source of probing linearly polarized laser pulses in the lidar is a solid-state laser with diode pumping of the YAG: Nd active element with a pulse power of 20 mJ at a wavelength of 532 nm and a duration of 7 ns. The co- and cross-polarized components of the echo signal were recorded during the lidar survey. The cross-polarized component of the echo signal was mainly used due to its greater sensitivity to various kinds of inhomogeneities in the vertical distribution of hydrooptical characteristics. The purpose of processing is to identify quasi-periodic structures in the spatial distribution of the characteristics of lidar echo signals caused the propagation of short-period internal waves. Three processing methods were applied: the approximation method, the wavelet analysis method, and the Hilbert-Huang transform method. A large array of data obtained during 50 hours of lidar survey has been processed. Three 60-minute tracks containing quasi-periodic structures have been identified. The three processing methods results are in good agreement with each other and make it possible to obtain the most complete information about the parameters of the studied processes. The parameters of the recorded quasi-periodic processes are typical for internal waves observed in the coastal areas of the Black Sea. In the future, when processing a large amount of lidar sounding data, it is advisable to carry out fast processing by automated spectral methods at the first stage, and to carry out detailed processing by the approximation method only for those survey areas where quasi-periodic processes have been identified.
10 January 2024 in Fundamental and Applied Hydrophysics
A lidar survey of the western part of the Kara Sea was carried out in September 2022. The shipborne radiometric (profiling) lidar PLD-1 was used. The lidar optical unit was located on the 8th deck of the R/V ‘Akademik Mstislav Keldysh’ at an altitude of 15 m above the water surface. Lidar sounding was carried out at stations and underway. The vessel route passed through water areas characterized by a wide range of changes in hydrooptical characteristics. Lidar measurements were accompanied by synchronized measurements of hydrooptical and hydrological characteristics. These measurements were carried out using submersible instruments at stations and using a flow-through measuring complex along the ship's route. The hydrooptical characteristics vertical distribution uniformity in the upper ten-meter layer was controlled remotely using underway lidar data.Good agreement between the spatial distributions of the lidar echo signals parameters, of the hydrooptical and of the hydrological characteristics (coincidence of the locations of various distribution features, local maxima, minima and frontal zones) was demonstrated. A large volume of measurement data has been obtained, which allows for further statistical processing in order to find relationships between the parameters of lidar echo signals and hydrooptical characteristics recorded by contact methods.
28 November 2024 in Fundamental and Applied Hydrophysics
A series of lidar measurements were conducted at stations with a homogeneous vertical distribution of hydrooptical char acteristics in the near-surface layer using a two-channel shipborne polarization lidar PLD-1. Lidar sounding was accompanied by synchronous contact measurements of a number of hydrooptical characteristics. A large dataset of measurement data was obtained in waters where hydrooptical characteristics varied widely. As a result of the statistical processing of these data, regression relationships were obtained linking the seawater beam attenuation coefficient c, absorption coefficient a, and diffuse attenuation coefficient Kd to the lidar attenuation coefficients of the co- and cross-polarized components. In most cases, a linear relationship between hydrooptical characteristics and the lidar attenuation coefficients of the polarized components is observed. These rela tionships are characterized by high values of the coefficient of determination — from 0.8 to 0.95. An exception is the relationship between the seawater beam attenuation coefficient c and the lidar attenuation coefficient of the cross-polarized component, where a second-degree polynomial is used to describe this relationship (coefficient of determination is 0.88). Data on the hydrooptical characteristics obtained using the cross-polarized component of the lidar echo signal mostly duplicate the data of the co-polarized component. However, the use of a two-channel optical receiving system increases the reliability and accuracy of the obtained data and provides the possibility of controlling the homogeneity of the underwater section of the sounding path.