9 June 2022 in IEEE Internet of Things Journal
As mobile shopping has gradually become the mainstream shopping mode, recommendation systems are gaining an increasingly wide adoption. Existing recommendation systems are mainly based on explicit and implicit user behaviors. However, these user behaviors may not directly indicate users’ inner feelings, causing erroneous user preference estimation and thus leading to inaccurate recommendations. Inspired by our key observation on the correlation between pupil size and users’ inner feelings, we consider using the change of pupil size when browsing to model users’ preferences, so as to achieve targeted recommendations. To this end, we propose PupilRec as a computer-vision-based recommendation framework involving a mobile terminal and a server side. On the mobile terminal, PupilRec collects users’ pupil size change information through the front camera of smartphones; it then preprocesses the raw pupil size data before transmitting them to the server. On the server side, PupilRec utilizes the Tsfresh package and Random Forest algorithm to figure out the key time-series features directly implying user preferences. PupilRec then trains a neural network to fit a user preference model. Using this model, PupilRec predicts user preference to obtain a user–product matrix and further simplifies it by singular value decomposition. Finally, the real-time recommendation is achieved by a collaborative filtering module that retrieves recommended contents to users smartphones. We prototype PupilRec and conduct both experiments and field studies to comprehensively evaluate the effectiveness of PupilRec by recruiting 67 volunteers. The overall results show that PupilRec can accurately estimate users’ preference and can recommend products users interested in.
20 July 2022 in IEEE Transactions on Antennas and Propagation
A design methodology of dual-band Fabry-Perotcavity (FPC) antenna is proposed, realizing dual broadband high gain and keeping the simplicity of one low-profile resonant cavity. A ray optics model is applied to obtain the phase resonance condition for dual-band FPC antennas. The proposed antenna employs a tightly stratified partial-reflective-surface (PRS), an artificial-magnetic-conductor (AMC) ground, and a dual-band microstrip feed. The PRS modulates independently the dual-band reflection coefficient to maintain large amplitude and positive phase gradient. Meanwhile, an AMC ground is distinctively employed to compensate for the transmission-phase difference of the lower band when the cavity height meets half the wavelength of the upper one, enabling eventually a low-profile uni-cavity. Further, a dual-band microstrip feed with two asymmetric slots is customized as the primary radiator. Detailed electromagnetic studies are carried out to illustrate the operating mechanisms of these components. Finally, a proof-of-concept prototype is fabricated covering the entire global 2.4 GHz and 5 GHz WIFI-bands. The measurement results agree well with the simulation, and the 3-dB gain bandwidths of 7.2% and 16.2% with peak gains of 13.6 dBi and 15.0 dBi over two wide bands of 2.42-2.60 GHz and 5.1-6 GHz are achieved, respectively, with a single cavity height of 26.8mm.
9 December 2019 in IEEE Antennas and Wireless Propagation Letters
Broadband high-gain Fabry–Perot cavity (FPC) antennas require multilayer partially reflective surfaces (PRSs), but there are often air gaps between two adjacent layers greatly increasing the profile and instability of the antenna. To shrink their profile by eliminating the air gaps, an equivalent circuit analysis considering interlayer coupling and employing accurate analytical calculation of the circuit element values with physical dimensions is proposed in this letter. Based on the proposed method, a compact stratified metasurface is designed as the PRS. The optimized results by our analytical approach are in an excellent agreement with the full-wave simulation ones. Moreover, a low-profile broadband high-gain FPC antenna comprising a waveguide-feed slot antenna inside the ground and the proposed stratified PRS is presented. A proof-of-concept prototype is fabricated, and the measurement shows that a 14% 3 dB gain bandwidth with a central operating frequency of 19 GHz and maximum gain of 19.4 dBi is achieved, which in turn validates our method. The total profile of the antenna is close to a half-wavelength, making it an excellent candidate for miniaturized automotive radars and modern communications.
3 August 2023 in IEEE Internet of Things Journal
The rapid development and proliferation of millimeter-wave (mmWave) networks have significantly boosted interest in wireless energy harvesting within this band. This article delineates a novel broadband, high-gain, multibeam ambient mmWave energy harvesting system. The system incorporates a modified Luneburg lens, a dual-polarized ME-dipole rectenna array, and a simple dc combiner to adeptly address the challenges associated with battery charging and replacement within the scope of industrial Internet of Things (IoT) applications. The system leverages frequency, spatial, and polarization diversity to optimize mmWave energy harvesting. The modified Luneburg lens realizes RF combination and multibeam characteristics, while a simplified rectifier network allows for efficient energy conversion. The antenna array has 29 antenna elements, each achieving 50% relative bandwidth covering 24–40 GHz. Beams have a gain of up to 27 dBi, providing 130° of 3-D spatial coverage. The rectifier design has been validated for high RF-to-DC efficiency across the operating frequency. Our prototype shows the system can provide an output dc voltage of 3.5 V, an output dc power of 6 dBm, and an RF-to-DC efficiency of about 40% when two transmitters produce a power density of 0.15 mW/cm2.
18 April 2023 in IEEE Transactions on Antennas and Propagation
Expanding the bandwidth of resonator cavity antennas is challenging, and most studies have focused on using positive phase gradient partially reflective surfaces. Although multi-layer partially reflective surfaces can provide bandwidth enhancement, they have the weaknesses of extremely high design complexity and thresholds in bandwidth improvement. Here, a new approach is proposed to significantly enhance the 3 dB gain bandwidth of the resonator cavity antenna while maintaining high gain and low profile. The method begins by utilizing an open resonator with a spherically modified ground to activate multiple resonances akin to Laguerre-Gaussian beam modes. Positive phase gradients are then added to the frequency band between each resonant mode for phase optimization, all provided by a simple metasurface. The proposed approach has been verified across multiple designs and the antenna prototype of one design has been selected for fabricating. The measurements agree very well with simulations, showing a 3-dB gain bandwidth of about 40%, a peak gain of 19 dBi, and a side-lobe level of around -10 dB. This work demonstrates a new low-profile, high-gain, wideband, low-design complexity antenna for various wireless system.
24 May 2024 in IEEE Internet of Things Journal
This study introduces a novel Wireless Power Transfer (WPT) system designed explicitly for distance-tolerant and angle-insensitive. The system incorporates a Fabry-Perot Cavity (FPC) and a Rectifying Metasurface (ReMS), effectively addressing the challenge of maintaining stable Direct Current (DC) output power across varying distances. The FPC antenna serves as the transmitter, while the ReMS, as one layer of the multi-layer FPC, combines the functionalities of a receiver and rectifier. The ReMS captures Radio Frequency (RF) energy from diverse incident angles through its top surface’s cross dipoles. Its bottom rectification network is designed based on the performance of the FPC antenna, aiming to improve the efficiency of RF-to-DC conversion. Comprising 64 cells, the ReMS achieves an energy harvesting efficiency of up to 94.5% at various incident angles. Additionally, the rectifier’s design has been validated with a peak rectifying efficiency of 62.6%. Prototype results indicate that the system, at an average unit input power of 10 dBm, attains considerably stable DC output power over a range of distances, with a total efficiency of approximately 40%-50%. The outcomes of this work lay the groundwork for developing self-powered units with wireless transmission capabilities, ideal for intelligent devices subject to frequent locational changes.