Organic conducting polymer poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) has garnered enormous attention in organic electronics due to its low-cost solution processability, highly tunable conductivity, superior mechanical flexibility, and good biocompatibility together with excellent atmospheric stability. Nevertheless, limited electrical properties and unfavorable water instability of pristine PEDOT:PSS film impede its further implementation in a broad spectrum of practical applications. In this work, the successful tailoring of the intrinsic electrostatic interaction within PEDOT:PSS and consequent optimized electrical properties are enabled by a simple yet effective ionic salt post-treatment strategy. The choice of zinc di[bis(trifluoromethylsulfonyl)imide] (Zn(TFSI)2) not only endows the post-treated PEDOT:PSS film with high electrical properties but also other compelling characteristics, including superior water stability, excellent mechanical flexibility, and fast humidity responsiveness. Multidimensional characterizations are conducted to gain in-depth insights into the mechanisms underlying such improved performance, ranging from intermolecular interactions, polymer conformations, and doping levels to microstructural characteristics. Benefiting from these versatile properties, the as-prepared freestanding Zn(TFSI)2-post-treated PEDOT:PSS films can serve as promising candidates for high-performance polymeric materials integrated into multifunctional flexible electronics, including thermoelectric power generators, conductive hydrogels, and humidity-responsive actuators. This study demonstrates a facile methodology for the exploration of multifunctional conducting polymers, whose implications can extend across a wide range of next-generation wearable devices, bioelectronics, and soft robotics.
1 September 2015 in IEEE Transactions on Antennas and Propagation
The finite-different time-domain (FDTD) method is applied to solve wave propagation in anisotropic dispersive materials by means of bilinear transform (BT) technique. The frequency-dependent and anisotropic constitutive relation is translated into time-domain update equations with coupled x- and y-components of electric fields. The proposed algorithm has a simple formulation and is easy to apply to general dispersive anisotropic or isotropic material. The transmission and reflection coefficients of a 9-mm magnetized plasma slab are calculated and compared to analytical solutions for validation purpose. Very-good agreements are found in both amplitude and phase of these coefficients.
A deep understanding of the structural evolution is critical for the precise morphological optimization of the active layer in organic solar cells. This perspective systematically reviews the kinetic mechanisms of film formation and emphasizes that regulating processing parameters, such as deposition temperature, processing solvent, and additives, can effectively govern crystallization and phase separation during layer deposition. Advanced in situ characterization techniques are highlighted as indispensable tools for real-time decoding of these coupled kinetic pathways. We also summarize these techniques, covering their principles, detectable structural information, and inherent limitations and constraints, thereby guiding the selection of appropriate in situ tools. Finally, we outline the key challenges in the field and provide insights into future research aimed at advancing device performance through targeted morphological control.
30 January 2025 in ACS Applied Materials & Interfaces
Solid additives have garnered significant attention due to their numerous advantages over liquid additives. This study explores the potential of the green-fluorescent conjugated polymer denoted Atums Green as a solid additive in green-solvent-based PBDB-TF-T1:BTP-4F-12 solar cells. Even tiny amounts of Atums Green doping significantly improve the device performance. For the reference solar cell without any additive, we find that device degradation is not caused by chemical redox reactions but by changes in crystallinity and microstructure evolution during aging in air under illumination. Operando GIWAXS and GISAXS are used to investigate the structure evolution. We discover a four-stage degradation process for the reference cell. In general, the lattice spacing and crystallite coherence length decrease, while the domain sizes increase, which causes the loss of shirt-circuit current JSC and fill factor FF. Furthermore, a decomposition component is detected in GIWAXS and GISAXS, corresponding to the loss of the open-circuit voltage VOC. Atums Green doping effectively suppresses the evolution of crystallinity and domain sizes as well as the continuous decomposition, thereby enhancing the device stability under illumination in air. This finding reveals the kinetic degradation process of organic solar cells, establishes a correlation between the morphological properties and device performance, and further demonstrates the promising potential of Atums Green doping in organic solar cells.