Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
We theoretically analyze a high-efficiency single-frequency Brillouin all-fiber ring laser at 1.5 µm wavelength, taking pump depletion into account. The output pump and Stokes intensities are calculated as functions of the cavity coupling coefficient and of the input pump intensity. Lasing threshold and pump-to-Stokes conversion efficiency are predicted. Furthermore, we demonstrate good agreement between model results and measurements. Applications to the improvement of optoelectronic links for radio-frequency signals by use of stimulated Brillouin scattering fiber lasers are also presented.
We propose and experimentally demonstrate a two-dimensional optical architecture, based on polarization switching by N spatial light modulators of p x p pixels, which provides 2 exp N-1 time delays values and an analog control of the 0- to 2-pi phase for each of the p x p microwave signals actuating an active antenna. These signals originate from the coherent detection of a dual frequency laser beam obtained with an acoustooptic frequency shifter. Experimental results obtained at a microwave frequency of 1.8 GHz are presented.
This paper presents an optical system which enables a broadband RF signal to be detected and delayed by a traveling fringes detector (TFD) using an acousto-optic deflector (AOD) and a 4f imaging system. The TFD is based upon the synchronous drift of photo-generated carriers with a moving interference pattern; the moving interference pattern is generated by interfering two coherent beams of light at different frequencies. Light which is incident on the photoconductive layer of the detector will generate photocarriers with a specific drift velocity proportional to the applied bias voltage. For a fixed angle between the two beams, a resonance peak occurs when the drift velocity equals the fringe velocity of the moving interference pattern. Detection of a broadband signal, therefore, is difficult since each frequency component produces a different fringe velocity and thus has a different resonance peak associated with the detector. Broadband detection of a signal is allowed by forcing each of the detected moving interference patterns, each corresponding to a specific temporal RF frequency, to have the same velocity as the electron drift velocity. This can be accomplished by using an AOD to linearly deflect each frequency component of the RF signal at the appropriate angle in order to maintain a constant overall fringe velocity at the TFD.