Christian Michael Franck

Christian Michael Franck

Auto-generated profile, based on publicly available information

Christian Michael Franck

Institute for Power Systems and High Voltage Technology, ETH Zürich, Physikstrasse 3, 8092 Zürich, Switzerland

Research Focus & Metrics

Academic Career Length

28Years (1999-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 January 2011 in IEEE Transactions on Power Delivery
Verified
Journal Article
Closed access
CFChristian M. Franck
Christian M. Franck
The continuously increasing demand for electric power and the economic access to remote renewable energy sources such as off-shore wind power or solar thermal generation in deserts have revived the interest in high-voltage direct current (HVDC) multiterminal systems (networks). A lot of work was done in this area, especially in the 1980s, but only two three-terminal systems were realized. Since then, HVDC technology has advanced considerably and, despite numerous technical challenges, the realization of large-scale HVDC networks is now seriously discussed and considered. For the acceptance and reliability of these networks, the availability of HVDC circuit breakers (CBs) will be critical, making them one of the key enabling technologies. Numerous ideas for HVDC breaker schemes have been published and patented, but no acceptable solution has been found to interrupt HVDC short-circuit currents. This paper aims to summarize the literature, especially that of the last two decades, on technology areas that are relevant to HVDC breakers. By comparing the mainly 20+ years old, state-of-the art HVDC CBs to the new HVDC technology, existing discrepancies become evident. Areas where additional research and development are needed are identified and proposed.

28 August 2013 in IEEE Transactions on Power Delivery
Verified
Journal Article
Closed access
MBMatthias K. Bucher
Matthias K. Bucher
RWRoger Wiget
Roger Wiget
GAGoran Andersson
Goran Andersson
CFChristian M. Franck
Christian M. Franck
This paper investigates the influence of dc network topology with respect to two important aspects: the steady-state losses and the transient fault currents. For this, optimal power flow in a combined ac-dc multiterminal HVDC cable system based on voltage-source converters and the development of prospective fault currents during a pole-to-ground fault is simulated. The results prove that an evaluation of grid topologies must include both of the aforementioned aspects and that no network topology can optimize both at the same time.

1 October 2013 in IEEE Transactions on Power Delivery
Verified
Journal Article
Closed access
VAV. Akhmatov
V. Akhmatov
MCM. Callavik
M. Callavik
CFC. M. Franck
C. M. Franck
SRS. E. Rye
S. E. Rye
TAT. Ahndorf
T. Ahndorf
RWR. Wiget
R. Wiget
This paper presents important results of the European HVDC Study Group founded on an initiative by the German Commission for Electrical, Electronic and Information Technologies in September 2010. The main task of the Study Group has been defining “Technical Guidelines for first HVDC Grids”: 1) to gain a common understanding of basic operating and design principles of HVDC grid systems, and 2) to prepare the ground for more detailed standardization work. The HVDC systems are moving from the stage of point-to-point (PTP) connectors to the stage of the transmission systems interconnecting more than two stations and utilizing multiterminal (MT), multivendor (MTMV) HVDC voltage-source converter (VSC) systems. The development will be modular, for example, in steps, starting with interconnecting PTP connectors and establishing three-pod, radial systems. Then, such simple systems may gradually be interconnected into radial and meshed HVDC-VSC systems comprising more HVDC lines and dc converter stations. This paper describes understanding, specification, and standardization of design and operation principles of the HVDC grids seen as the first needed steps toward such MTMV systems.

1 December 2012 in IEEE Transactions on Dielectrics and Electrical Insulation
Verified
Journal Article
Closed access
USUeli Straumann
Ueli Straumann
MSMichael Schuller
Michael Schuller
CFChristian M. Franck
Christian M. Franck
It seems generally accepted that HVDC technology is to become increasingly relevant in power systems. With this expected future advance of HVDC, the use of gas insulated switchgear or lines for dc application are getting increasingly interesting. As in the case of dc the electric fields are determined resistively in contrast to the capacitive fields in the case of ac, gas insulated technology has to be revisited. In many previous works surface charging of model spacers was investigated. However, the ion flow problem to properly account for the electric conduction in the gas has not yet been solved. Further, no combination with inhomogeneous electric conductivity determined for example by temperature profiles from ohmic heating in nominal condition has been performed so far. In this paper, the gas conductivity arising from ions produced by natural radiation is computed by solving the ion flow field problem, and its role is compared to spacer bulk conductivities. Further, the impact of temperature profiles on spacer charging is investigated. The results indicate that for actual disc spacers, the spacer bulk conductivity is more important than that from the gas ionized by natural radiation. Especially in the case of polarity reversal, thermally enhanced spacer charging can result in considerable increase of tangential field strengths.

15 May 2013 in IEEE Transactions on Power Delivery
Verified
Journal Article
Closed access
MBMatthias K. Bucher
Matthias K. Bucher
CFChristian M. Franck
Christian M. Franck
The scope of this paper is the investigation of the development of fault currents in a circuit breaker (CB) during a pole-to-ground fault in a generic multiterminal HVDC cable system based on voltage-source converters. It aims to contribute to the current discussion of which requirements on breaking time and peak current HVDC CBs need to fulfill in such networks. Therefore, the fault current is broken down into the individual contributions from the different network components, and the influence of the key parameters on the development of the fault current in the CB of the faulted cable is illustrated.

23 June 2015 in IEEE Transactions on Power Delivery
Verified
Journal Article
Closed access
MBMatthias K. Bucher
Matthias K. Bucher
CFChristian M. Franck
Christian M. Franck
In a multiterminal HVDC network, dc circuit breakers (CBs) are required at each end of a line to selectively isolate a fault. Several CB concepts have been implemented in PSCAD, which differ significantly in their structure and performance. This paper describes the interaction of the different HVDC CB topologies with a meshed four-terminal network and assesses their performance in terms of maximum currents and voltages. The tradeoff between network parameters and CB requirements is analyzed.