Esra Can Doğan

Esra Can Doğan

Auto-generated profile, based on publicly available information

Esra Can Doğan

Kocaeli University

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2010 in Water Science & Technology
Verified
Journal Article
Closed access
ECEsra Can-Dogan
Esra Can-Dogan
MTMustafa Turker
Mustafa Turker
LDLevent Dagasan
Levent Dagasan
AAAyla Arslan
Ayla Arslan
Sulfide is present in wastewaters as well as in biogas and can be removed by several physicochemical and biotechnological processes. Nitrate is a potential electron acceptor, readily available in most wastewater treatment plants and it can replace oxygen under anoxic conditions. A lab-scale reactor was operated for treatment of sulfide containing wastewater with nitrate as an electron acceptor and is used to evaluate the effects of volumetric loading rates, hydraulic retention time (HRT) and substrate concentrations on the performance of the lithotrophic denitrification process for treating industrial fermentation wastewaters. Sulfide is removed more than 90% at the loading rates between 0.055 and 2.004 kg S−2/m3 d, when the influent sulfide concentration is kept around 0.163 kg/m3 and the HRT decreased from 86.4 to 2 h. Nitrogen removal differed between 23 and 99% with different influent NO3−-N concentration and loading rates of NO3−/S−2 ratio. The stoichiometry of sulfide oxidation with nitrate is calculated assuming different end-products based on thermodynamic approach and compared with experimental yield values. The calculated maximum volumetric and specific sulfide oxidation rates reached 0.076 kg S−2/m3 h and 0.11 kg S−2/kg VSS h, respectively. The results are obtained at industrially relevant conditions and can be easily adapted to either biogas cleaning process or to sulfide containing effluent streams.

7 January 2015 in Urban Water Journal
Verified
Journal Article
Closed access
EDEsra Can Dogan
Esra Can Dogan
AYAynur Yasar
Aynur Yasar
USUnal Sen
Unal Sen
CACoskun Aydiner
Coskun Aydiner
Techno-economic feasibility of water recovery from secondary effluents of an urban wastewater treatment plant (WWTP) for landscape irrigation was investigated considering two distinctive strategies: ultrafiltration (UF)/chlorination and UF/reverse osmosis (RO). Experimental performance evaluations were conducted separately for UF membranes and for different RO trans-membrane pressures. The quality of the effluent recovered by the UF/RO system was in accordance with the national and international guidelines. The produced reuse water was first class quality according to the national guideline for all parameters except sodium adsorption ratio (SAR), which can be eliminated readily by direct addition of KCl into the recovered water. Estimated field-scale costs indicated that UF/RO yielded a total cost of US$12,500,000–13,600,000 with annual operating cost being US$482,000–533,000 at 5–20 bar. The economic estimations guaranteed reimbursement with US$7,600,000–7,400,000 net present value, 0.22–0.39 year payback time, US$0.44–0.49/m3 treatment cost, and a benefit/cost ratio of 0.57.

1 September 2019 in Science of The Total Environment
Verified
Journal Article
Open access
CACoskun Aydiner
Coskun Aydiner
BMBerna Kırıl Mert
Berna Kırıl Mert
EDEsra Can Dogan
Esra Can Dogan
HYH Cengiz Yatmaz
H Cengiz Yatmaz
SDSonmez Dagli
Sonmez Dagli
EBEsin Balci
Esin Balci
Feasible reclamation of industrial wastewaters by consuming less resource and time requires researchers to develop advanced and sophisticated solutions to meet today's versatile needs. In this respect, novel technological applications of hybrid membrane oxidation reactor (MOR) comprising of the Fenton or photo-Fenton enhanced ultrafiltration (FEUF and pFEUF), was demonstrated for treating textile washing wastewater. Their comparative hybrid performances were explored based on response surface analyses of Taguchi experimental designs that were optimized for maximized responses at minimum oxidant and acid consumptions. From eleven specific variables, those affecting the hybrid treatment performances at significant levels were found as H2O2 amount, process time, membrane type, Fe2+ concentration and temperature. The pFEUF treatment showed better and faster organics removal efficiency than by FEUF, and the UF process was seen to be more affected from changing operational conditions in pFEUF. Organic pollutants were oxidized by 56.6 ± 8.7% degradation and 31.5 ± 3.2% mineralization, while UF allowed a synergistic contribution to the hybrid MOR performance by 38.1 ± 4.7% and 17.3 ± 3.1%, respectively. Compared to simultaneous MOR and external UF after Fenton, sequential MOR was found as the best solution by an efficiency of 84.5% COD, 70.5% TOC, and 155.6 L/m2·h. The effluents could be readily produced with quality suitable for directly discharging to the sewage infrastructure system resulting in a complete treatment. This study proved that the developed MOR techniques are technologically favorable for the treatment of industrial organic wastewaters due to high treatment performances and less resource, time and land needs. It can be finally declared that they can be used as rather attractive solutions for not only wastewater reclamation but also water recovery by further handling of their effluents.

5 June 2012 in Biotechnology and Bioprocess Engineering
Verified
Journal Article
Closed access
PDF file
EDEsra Can Doğan
Esra Can Doğan
MTMustafa Türker
Mustafa Türker
LDLevent Dağaşan
Levent Dağaşan
AAAyla Arslan
Ayla Arslan

29 August 2018
Verified
Book Chapter
Open access
PDF file
BMBerna Kırıl Mert
Berna Kırıl Mert
NÖNihan özengin
Nihan özengin
EDEsra Can Dogan
Esra Can Dogan
CACoskun Aydıner
Coskun Aydıner
In the recent past years, micropollutants that are pharmaceutically active compounds (PhACs) have been used extensively and have been discovered in raw sewage, wastewater treatment plants, effluents, surface, and groundwater with concentrations from ng/L to several μg/L. Even though many of these compounds are still not determined online, monitoring technology improvements progressed. Today’s wastewater treatment plants are not constructed to remove these micropollutants yet. Conventional activated sludge processes are used in the treatment of municipal wastewater but are not specifically designed for the removal of micropollutants. The remaining pharmaceuticals mix into surface waters. At that stage, they can adversely affect the aquatic environment and may cause issues for drinking water production. As the conventional methods are insufficient for removing the micropollutants, other alternative treatment methods can be applied such as coagulation-flocculation, activated carbon adsorption (powdered activated carbon and granular activated carbon), advanced oxidation processes, membrane processes, and membrane bioreactor. It has been observed that membrane bioreactor (MBR) can achieve higher and more consistent micropollutants removal. The removal of micropollutants is based on physicochemical properties of micropollutants and the conditions of treatment. Due to recent technical innovations and cost reductions of the actual membranes, the membrane bioreactor takes attention. In this study, membrane bioreactor experiments for micropollutants in drinking use, wastewater, and surface waters were investigated in detail based on literature investigations, and the feasibility of this method was evaluated.

7 November 2024 in Water and Environment Journal
Verified
Journal Article
Open access
EDEsra Can Doğan
Esra Can Doğan
AYAynur Yaşar
Aynur Yaşar
ANAli Oğuzhan Narcı
Ali Oğuzhan Narcı
BMBerna Kırıl Mert
Berna Kırıl Mert
BYBerkay Umut Yeşildağlı
Berkay Umut Yeşildağlı
This study analyses the effects of operating conditions on the removal of three different pharmaceutically active compounds (PhACs: paracetamol [PARA], diclofenac [DIC] and metoprolol [MET]). The results of the experiments employing nanofiltration (NF) membranes were interpreted using response surface methodology (RSM) analysis of variance (ANOVA). In experiments performed with NF270 membrane under optimal operating conditions (15 bar pressure, 4 volume reduction factor [VRF], 5.7 pH), removal efficiencies of PhACs were 11.5%, 73.8% and 46.8%, respectively. The design of NF processes can help substantially in determining the rejection behaviours and mechanisms of micropollutants. Experiments have shown that in drug active substances removal with NF membranes, the physicochemical properties of the NF membranes used and the compound being PARA, DIC or MET affect the removal efficiency and provide an understanding of the rejection performance. These factors may also provide a guide for the applicability of the NF technology in advanced treatment processes in the future.