5 January 2022 in IEEE Transactions on Transportation Electrification
Electric means of transportation have seen a rapid expansion partly due to flexibility to commuters and carbon emission reduction. However, transportation electrification is creating severe power quality problems in the utility grid. A single-phase voltage-source traction converter (VSTC) plays a vital role in high-speed train operation. However, it is partly blamed for injecting instability into the vehicle-grid coupling systems (VGCSs). Therefore, understanding the function of VSTC and complying with various grid codes and technical standards for VGCSs is essential. Furthermore, grid-connected VSTC must comply with strict safety standards, such as IEEE Std. 519 and IEEE Std. 16. However, with hundreds or thousands of literature available, it is difficult to choose an effective control method that meets all the requirements. Consequently, to illustrate a clear picture of the development of effective control strategies, this work review recent control techniques, mainly for harmonics rejection and low-frequency oscillation suppression. Factors affecting grid stability and control performance are first identified and discussed in detail. Then, effective control methods to alleviate the disturbance are elaborated. Moreover, future trends on control strategies for VSTCs considering the recent advancements of artificial intelligence are extensively discussed.
16 September 2021 in IEEE Transactions on Vehicular Technology
Aiming at the low-frequency oscillation (LFO) phenomenon in high-speed railways, this paper proposes a feedback linearized virtual inertia control (VIC) strategy of the traction converter based on a sliding mode observer (SMO) to improve the robustness of the system and suppress the occurrence of LFO. First, to optimize the total harmonic distortion of the traction grid-side current, the inner loop controller is designed as the feedback linearization control. Then, the voltage outer loop is designed as a combination of the VIC designed in this paper and SMO, which enhances the system inertia and reduces the impact of external interference on the system, while reducing the controller's demand for electrical power on the DC-side. Furthermore, a small-signal model is established to analyze the stability of the single-phase vehicle-grid system under the proposed control. The influence of the control parameters on stability is discussed in detail. Finally, the comparison of software simulation and hardware-in-the-loop experimental results between traditional PI control, feedback linearization control, feedback+SMO, feedback+VIC and the proposed control method shows that the proposed control has better dynamic and static characteristics, and can effectively inhibit the occurrence of LFO.