2 July 2018 in Journal of King Saud University – Science
In the present paper, we report an experimental study on a special glass developed for Ag+-Na+ ion-exchange. The glass composition and the influence of each element of the composition on the diffusion parameters were studied. Some parameters of exchange are determined, as well as the diffusion coefficient, refractive index variation, propagation and coupling losses. Such parameters can determine the fabrication conditions of integrated devices. The obtained waveguides have low coupling and propagation losses. The behavior of the fabricated waveguides at low temperatures is tested. It observed that, at these temperatures the diffusion is not negligible, which can affect the life time of the components. In order to improve this parameter, a modification of the amount of some elements of the glass composition is necessary, specially the alumina.
7 November 2024 in Journal of Metals, Materials and Minerals
The sol-gel self-ignition method has successfully synthesized a series of homogenous perovskites La1-xBixFeO3 (x=0.0, 0.2, 0.4, 0.6, and 0.8) nanoparticles. Rietveld refinement results from XRD patterns revealed no secondary phases in pure and Bi-substituted LaFeO3 samples. The structural transition from orthorhombic at x = 0.0 until x=0.6 (space group Pbnm) to rhombohedral at x=0.8 (space group R3c) was observed. Lattice parameter values increase slightly with Bi concentration due to the substitution of Bi in the LaFeO3 structure. The average crystallite size D was found to vary between 19 nm and 50 nm. The combination of XRD and SEM demonstrated that the prepared Bi-doped LaFeO3 is a single-phase perovskite with a relatively homogeneous particle size distribution. SEM images revealed quasi-spherical particle shapes. FTIR spectra identify the metal oxide bending vibrations at about 536 cm‒1 and 717 cm‒1 attributed to Fe-O and La-O bonds, respectively. No significant effect of Bi substitution from 0% up to 60% on crystal volume was observed, as confirmed by FTIR spectroscopy, which showed no shift in La/Fe-O bending vibration modes with increasing Bi content. The obtained results indicated that the Eg values exhibited a monotone decrease with an increase in Bi ratio. The band gap values varied from 2.2 eV for pure LaFeO3 to 1.85, 1.76, 1.54 and 1.35 eV for the substitutions of 20%, 40%, 60% and 80% respectively. Hence, the sample La0.2Bi0.8FeO3 with the small band gap value can be used as a promising candidate in solar cell applications.