15 May 2025 in Periodica Polytechnica Chemical Engineering
Slaughterhouse wastewater is highly rich in organic content. It carries an extremely high nutrient load when discharged into the environment, demonstrating that conventional treatment practices usually need to be more sustainable and extremely energy intensive. This research study probes various ways to integrate a microalgae-based platform to realize sustainable biohydrogen production, concurrently addressing critical wastewater treatment and renewable energy generation. A new two-stage cultivation method was developed using native wastewater bacteria and carbohydrate-rich microalgae, Chlorella vulgaris ESP 6. This method increased the efficiency of nutrient recovery and COD reduction compared to conventional single-stage systems. The microalgae, a key component in the process, efficiently converted the organic content of the wastewater into a carbohydrate-rich biomass, with a carbohydrate content of 48.8 ± 2.3%. This biomass was then fermented in the dark with Clostridium butyricum CGS5 to make biohydrogen after being treated with thermal acid. A pH control strategy through automatic operation was enforced, resulting in an impressive improvement in hydrogen production to 211 mL H2/g volatile solids and a maximum productivity of 39.11 mL/L/h, both competitive with the current literature. This study points out a promising way of replacing conventional wastewater treatment with integrated nutrient removal and energy recovery and utilizing wastewater biomass rich in carbohydrates as a renewable feedstock for biohydrogen production. Overall, this is the highest hydrogen yield ever reported on slaughterhouse wastewater and may be highly important for further development in waste-to-energy applications.
1 February 2025 in Nanoscience & Nanotechnology-Asia
Purpose: This study aimed to characterize commercial nanofiltration membranes (NF90 and NP010) by determining their membrane parameters and estimating osmotic pressure using the virial equation. Method: A comparison has been conducted using the Van't Hoff equation for both dilute and concentrated mixtures. Membrane parameters (σ, Ps, and ks) have been experimentally obtained, and osmotic pressure has been calculated using the virial equation, with results compared to the Van't Hoff equation. Various solutes, including lactose, Al3+, Mg2+, Na+, and Cl-, have been tested at different concentrations to investigate the membrane behavior. Result: Result: The virial equation has shown better agreement with experimentally measured fluxes than the Van't Hoff equation. With an increase in solute concentration, σ has decreased, while Ps and ks have increased. Higher cation valency has increased rejection rates, with lactose exhibiting the highest rejection. The rejection rates have followed the order of RLactose > RAl3+ > RMg2+ > RNa > RCl. The order of σ values has been as follows: σLactose > σAl3+ > σMg2+ > σNa+ > RσCl. While the order of Ps and ks values has been Cl->Na+>Mg2+>Al3+>lactose. Conclusion: The virial equation has proven to be more effective in estimating osmotic pressure. The findings have provided valuable insights into membrane behavior under varying conditions, optimizing the application of NF membranes across various industries.