Reducing uncertainty in quantifying basin‐scale water‐budget components is one of the most vexing problems for water‐resource managers. Although a vast literature addresses methods and scales of component estimates, uncertainty associated with these estimates is often lacking. Here we review sources of uncertainty and compile reported uncertainty estimates for measurement and estimation methods for six water‐budget components: precipitation, streamflow, evapotranspiration, subsurface discharge, infiltration, and recharge. Quantifying the uncertainty in each water‐budget component data is required before total water‐budget uncertainty can be determined.This article is categorized under: Science of Water > Hydrological Processes Science of Water > Methods
We present the first demonstration of hydraulic tomography (HT) to estimate the three‐dimensional (3D) hydraulic conductivity ( K ) distribution of a fractured aquifer at high‐resolution field scale (HRFS), including the fracture network and connectivity through it. We invert drawdown data collected from packer‐isolated borehole intervals during 42 pumping tests in a wellfield at the former Naval Air Warfare Center, West Trenton, New Jersey, in the Newark Basin. Five additional tests were reserved for a quality check of HT results. We used an equivalent porous medium forward model and geostatistical inversion to estimate 3D K at high resolution ( K blocks <1 m 3 ), using no strict assumptions about K variability or fracture statistics. The resulting 3D K estimate ranges from approximately 0.1 (highest‐ K fractures) to approximately 10 −13 m/s (unfractured mudstone). Important estimated features include: (1) a highly fractured zone (HFZ) consisting of a sequence of high‐ K bedding‐plane fractures; (2) a low‐ K zone that disrupts the HFZ; (3) several secondary fractures of limited extent; and (4) regions of very low‐ K rock matrix. The 3D K estimate explains complex drawdown behavior observed in the field. Drawdown tracing and particle tracking simulations reveal a 3D fracture network within the estimated K distribution, and connectivity routes through the network. Model fit is best in the shallower part of the wellfield, with high density of observations and tests. The capabilities of HT demonstrated for 3D fractured aquifer characterization at HRFS may support improved in situ remediation for contaminant source zones, and applications in mining, repository assessment, or geotechnical engineering.
This report documents the development of a computer model to simulate steady-state (long-term average) flow of ground water in the vicinity of Mirror Lake, which lies at the eastern end of the Hubbard Brook valley in central New Hampshire. The 10-km2 study area includes Mirror Lake, the three streams that flow into Mirror Lake, Leeman's Brook, Paradise Brook, and parts of Hubbard Brook and the Pemigewasset River. The topography of the area is characterized by steep hillsides and relatively flat valleys. Major hydrogeologic units include glacial deposits, composed of till containing pockets of sand and gravel, and fractured crystalline bedrock, composed of schist intruded by granite, pegmatite, and lamprophyre. Ground water occurs in both the glacial deposits and bedrock. Precipitation and snowmelt infiltrate to the water table on the hillsides, flow downslope through the saturated glacial deposits and fractured bedrock, and discharge to streams and to Mirror Lake....