1 September 2024 in Measurement
1 March 2024 in Optical Engineering
The pressure sensor is an essential device for pressure measurement and safety evaluation in modern industrial production and engineering applications. A fiber Bragg grating (FBG) pressure sensor is proposed. The FBG pressure sensor is designed based on a Bourdon tube and cantilever beam. Two FBGs are fixed on both sides of the elastomer with a sensitization effect, and the elastomer and the Bourdon tube are connected by spring. The sensing principle of the FBG pressure sensor is introduced in detail, the mathematical model of the sensor is established, and the performance of the sensor is studied. The experimental results show that the average sensitivity is 5.578 nm/MPa in the range of 0 to 0.4 MPa. The maximum error is 1.3% in the temperature range of −10°C to 70°C, and the temperature compensation performance is good. The remote transmission performance of the sensor is tested. The transmission loss of the sensor is about 0.433 dBm/km when the fiber cable length is 8.45 km. The field application is carried out in a pipeline experimental site, which verifies the practicability of the sensor.
1 April 2022 in Optical Engineering
The sealing state of the watertight door (SSWD) is important information for the safe operation of a ship. A monitoring method for the SSWD based on fiber Bragg grating (FBG) sensor is designed, which can monitor the opening and closing state of the watertight door in real-time. A highly sensitive and temperature-independent sensor is installed under the rubber of the watertight door, the relationship between the displacement of the door panel and the wavelength shift of FBG is linearly fitted with the sensitivity of about 314.511 pm / mm, and the error percentage with the finite element analysis is 6.22%. The watertight door is opened and closed many times, the results show that the sensor has good stability and reliability, and the opening state, closing state, and the degree of opening and closing can be accurately judged by the wavelength shift of FBG. At the same time, the sensor can also identify the foreign body within a certain range on the rubber surface.
29 April 2026 in IEEE Sensors Journal
Strain and deformation are important parameters to reflect the state of engineering structures. In this paper, a novel ultra-weak fiber Bragg grating (UWFBG) array strain sensor is investigated for large-scale engineering structures, and a strain sensing optical cable with pre-strain is fabricated using a multilayer encapsulation technique and a novel preparation process. The optical fiber is bonded at a fixed interval to form a continuous strain sensing unit inside the optical cable. The analysis shows that the transfer efficiency of all strain sensing units can reach more than 98%, and the response of multiple sensing units to strain shows good consistency with a strain sensitivity of 1.08 pm/με. The experimental results on a reinforced concrete beam show that the strain sensing cable can monitor the bending strain of the beam under load, and the deformation of the beam can be obtained based on the strain. Therefore, the UWFBG array strain sensor proposed in this study provides a new way for health monitoring of large-scale engineering structures.
9 July 2026 in Measurement