12 September 2008 in Science
The microstructure and properties of a material depend on dynamic processes such as defect motion, nucleation and growth, and phase transitions. Transmission electron microscopy (TEM) can spatially resolve these nanoscale phenomena but lacks the time resolution for direct observation. We used a photoemitted electron pulse to probe dynamic events with “snapshot” diffraction and imaging at 15-nanosecond resolution inside of a dynamic TEM. With the use of this capability, the moving reaction front of reactive nanolaminates is observed in situ. Time-resolved images and diffraction show a transient cellular morphology in a dynamically mixing, self-propagating reaction front, revealing brief phase separation during cooling, and thus provide insights into the mechanisms driving the self-propagating high-temperature synthesis.
30 September 2011 in Physical Review Letters
We have directly resolved shock structures in pure aluminum in the first few hundred picoseconds subsequent to a dynamic load at peak stresses up to 43 GPa and strain rates in excess of . For strong shocks we obtain peak stresses, strain rates, and rise times. From these data, we directly validate the invariance of the dissipative action in the strong shock regime, and by comparing with data obtained at much lower strain rates show that this invariance is observed over at least 5 orders of magnitude in the strain rate. Over the same range, we similarly validate the fourth-power scaling of the strain rate with the peak stress (the Swegle-Grady relation).
24 July 2006 in Applied Physics Letters
A dynamic transmission electron microscope (DTEM) has been designed and implemented to study structural dynamics in condensed matter systems. The DTEM is a conventional in situ transmission electron microscope (TEM) modified to drive material processes with a nanosecond laser, “pump” pulse and measure it shortly afterward with a -long probe pulse of electrons. An image with a resolution of may be obtained with a single pulse, largely eliminating the need to average multiple measurements and enabling the study of unique, irreversible events with nanosecond- and nanometer-scale resolution. Space charge effects, while unavoidable at such a high current, may be kept to reasonable levels by appropriate choices of operating parameters. Applications include the study of phase transformations and defect dynamics at length and time scales difficult to access with any other technique. This single-shot approach is complementary to stroboscopic TEM, which is capable of much higher temporal resolution but is restricted to the study of processes with a very high degree of repeatability.
1 April 2007 in Ultramicroscopy
19 March 2014 in Journal of Applied Physics
We have used a table-top scale laser to dynamically compress iron at strain rates in excess of 109 s−1. Using an embedded ultrafast interferometer, we have measured corresponding free surface histories with a time resolution of approximately 10 ps. We have analyzed the surface histories using a method that accounts for nonsteady wave propagation and time-dependent material behavior. We show that at these strain rates, the polymorphic transition begins within 100 ps after an initial very large (∼10 GPa) and mostly elastic compression and appears largely complete within a similar time thereafter. The corresponding deviatoric stress before the transition begins can exceed 3 GPa, while the transition stress itself is up to 25 GPa, nearly twice the value measured at low strain rates. We use these results to propose a systematic variation with loading time of the normal-stress/relative-volume curve followed by iron during rapid compression.
15 March 2009 in Nature Physics