Recent SOC activities focus on upscaling systems to MW scale with target operation of several 10,000 h. These long lifetimes require new approaches for durability testing. In the present study, the influence of different operating parameters on degradation were studied by long-term cell testing in fuel cell and electrolysis mode (In-situ aging). Based on the results, accelerating parameters for degradation were identified and cells were treated/aged under these conditions without applying an external potential (OCV aging). This approach is cheaper and time saving as compared to conventional cell/stack long-term durability testing. Two commercial SOC cell designs, Fuel Electrode supported cells (FSC) and Electrolyte supported cells (ESC) were studied in this work. They were aged according to the two approaches (under operating conditions and with and without current load) and the obtained degradation effects compared to each other. Based on the cell composition and configuration the degradation parameters were observed to affect the cell performance to varying extents.
2 March 2026 in Journal of the Electrochemical Society
One major degradation mechanism in Ni-yttria-stabilized-zirconia (Ni/YSZ) fuel electrodes is the migration of Ni away from the fuel electrode-electrolyte interface. This degradation mechanism continues to pose a significant challenge in context of fuel electrode supported cell (FSCs). It significantly impacts both electrochemical performance and electrode lifetime. Ni migration is typically observed when operating at high current densities that lead to high overpotentials. In this work, two fuel electrode supported cells are compared, both with respect to initial electrochemical performance and lifetime. The two cells had similar initial overall resistance when operated in steam electrolysis at −0.75 A cm −2 , inlet of H 2 O/H 2 :90/10 at 750 °C. Cell 1 initially had low resistance due to physical processes i.e. concentration polarization (R conc ) and high resistance due to electrochemical processes at the Ni/YSZ electrode (R Ni/YSZ ); while Cell 2 was designed to have high concentration polarization (R conc ) and low resistance due to electrochemical processes at the Ni/YSZ electrode. This work shows that it is R Ni/YSZ —not R conc or total resistance - that is the determining resistance contribution for fuel electrode degradation and Ni migration. Furthermore, post-test analysis show presence of impurities and a microstructure indicating a pre-cursor state for Ni migration.