The increasing use of nanosatellites as host platforms for increasingly data-intensive sensors such as hyperspectral imagers or video, drives a need for more power-efficient, higher-rate data downlink capability. CubeSats, the dominant standard for nanosatellites, have limited size, weight, and power, making it difficult to accommodate high gain radio-frequency (RF) antennas. This pushes most CubeSat missions with high data rate needs to use ground stations with large, high-gain apertures (dish diameters ranging from 5 to 20 m). There are also regulatory challenges in obtaining RF licenses with substantial bandwidth for CubeSat missions; even management of the many narrow-bandwidth license requests has become an issue. An alternative to traditional RF communications is desirable for CubeSats.
Precision wavefront control on future segmented-aperture space telescopes presents significant challenges, particularly in the context of high-contrast exoplanet direct imaging. We present a new wavefront control architecture that translates the ground-based artificial guide star concept to space with a laser source on board a second spacecraft, formation flying within the telescope’s field of view. We describe the motivating problem of mirror segment motion and develop wavefront sensing requirements as a function of guide star magnitude and segment motion power spectrum. Several sample cases with different values for transmitter power, pointing jitter, and wavelength are presented to illustrate the advantages and challenges of having a non-stellar-magnitude noise limited wavefront sensor for space telescopes. These notional designs allow increased control authority, potentially relaxing spacecraft stability requirements by two orders of magnitude and increasing terrestrial exoplanet discovery space by allowing high-contrast observations of stars of arbitrary brightness.
In this study, the feasibility and utility of using a maneuverable nanosatellite laser guide star from a geostationary equatorial orbit have been assessed to enable ground-based, adaptive optics imaging of geosynchronous satellites with next-generation extremely large telescopes. The concept for a satellite guide star was first discussed in the literature by Greenaway and Clark in the early 1990s (“PHAROS: An Agile Satellite-Borne Laser Guidestar,” Proceedings of SPIE, Vol. 2120, 1994, pp. 206–210), and expanded upon by Albert in 2012 (“Satellite-Mounted Light Sources as Photometric Calibration Standards for Ground-Based Telescopes,” Astronomical Journal, Vol. 143, No. 1, 2012, p. 8). With a satellite-based laser as an adaptive optics guide star, the source laser does not need to scatter, and is well above atmospheric turbulence. When viewed from the ground through a turbulent atmosphere, the angular size of the satellite guide star is much smaller than a backscattered source. Advances in small-satellite technology and capability allowed the revisiting of the concept on a 6U CubeSat, measuring . It is shown that a system that uses a satellite-based laser transmitter can be relatively low power ( transmit power) and operated intermittently. Although the preliminary analysis indicates that a single satellite guide star cannot be used for observing multiple astronomical targets, it will only require a little propellant to relocate within the geosynchronous belt. Results of a design study on the feasibility of a small-satellite guide star have been presented, and the potential benefits to astronomical imaging and to the larger space situational awareness community have been highlighted.
This paper examines the ability to produce a laser beam detectable to a cursory survey (SNR 0.1% with a 1 m receive telescope) by an extraterrestrial intelligence using proven or near-term technology (megawatt-class lasers, telescopes tens of meters in size). We find that such lasers can produce a signal at ranges of less than 20,000 lt-yr, with a broad enough beam to overcome uncertainties in nearby exoplanet orbits (e.g., Prox Cen b) or encompass entire habitable zones of more distant systems (e.g., TRAPPIST-1). While the probability of closing a handshake with even a nearby extraterrestrial intelligence is low with current survey methodologies, advances in full-sky surveys for SETI and other purposes may reduce the mean-time-to-handshake to decades or centuries, after which these laser systems may close links at data rates of kbps–Mpbs. The next major gap to address for searching for extraterrestrial lasers is in expanding spectral searches into the infrared, where most terrestrial communication and high-power lasers are manufactured.
Radio occultation (RO) is a powerful tool for remotely sensing the atmosphere, producing globally distributed soundings with high vertical resolution and high temperature retrieval accuracy, especially in the stratosphere. The spatial distribution of the soundings typically prevents the use of these measurements for studying atmospheric effects with small horizontal or temporal scales. However, careful arrangement of a dedicated RO constellation can yield sounding clusters useful for the tomographic reconstruction of internal gravity waves with horizontal wavelengths in the tens of kilometers. This paper presents occultation cluster quality metrics predictive of internal gravity wave tomographic reconstruction error and uses these metrics to compare the performance of two alternative RO constellation geometries, mutual orbit groups (MOG) and a spread in right ascension of the ascending node (RAAN). MOG constellations have better overall performance and yield more consistent cluster quality across all sampled latitudes, while RAAN-spread constellations have improved equatorial quality and a trend toward reduced quality at the edges of the latitude range. Additionally, analysis of clusters by latitude, ray azimuth, and quality is performed in order to examine the trends in the outlier best- and worst-performing clusters for each constellation type.