7 May 2024 in Materials Science and Engineering: A
9 October 2024 in Corrosion Science
6 March 2024 in Materials Genome Engineering Advances
Additive friction stir deposition (AFSD) provides strong flexibility and better performance in component design, which is controlled by the process parameters. It is an essential and difficult task to tune those parameters. The recent exploration of machine learning (ML) exhibits great potential to obtain a suitable balance between productivity and set parameters. In this study, ML techniques, including support vector machine (SVM), random forest (RF) and artificial neural network (ANN), are applied to predict the mechanical properties of the AFSD‐based AA6061 deposition. Expect for the stable parameters (temperature, force and torque) in situ monitored by the self‐developed process‐aware kit during the AFSD process and the other factors (rotation speed, traverse speed, feed rate and layer thickness) are also set as input variables. The output variables are microhardness and ultimate tensile strength (UTS). Prediction results show that the ANN model performs the best prediction accuracy with the highest R2 (0.9998) and the lowest mean absolute error (MAE, 0.0050) and root mean square error (RMSE, 0.0063). Furthermore, analysis suggests that the feed rate (24.8%/24.1%) and layer thickness (25.6%/26.6%) indicate a higher contribution that affects the mechanical properties.
26 January 2026 in Materials Genome Engineering Advances
Additive friction stir deposition (AFSD) is an effective method for fabricating high‐performance deposits, with process parameters directly influencing the mechanical properties of the resulting samples. In this study, three machine learning models, that is, multilayer perception (MLP), radial basis function (RBF), and back propagation (BP), are developed to predict the ultimate tensile strength (UTS) and elongation (EL) of AFSD Al2219 samples. The input variables include set parameters (rotation speed, traverse speed, layer thickness, and the presence or absence of a preheating system as well as data obtained from an in situ process monitoring kit (temperature, feedstock force, deposition interface force, and deposition interface torque)). Results show that the BP‐trained neural network provides the best fit to the experimental data, achieving the highest coefficient of determination ( R 2 = 0.821 for UTS and 0.817 for EL), the lowest mean absolute error (MAE = 8.692 for UTS and 1.003 for EL), and the lowest root mean square error (RMSE = 13.773 for UTS and 1.266 for EL). These findings demonstrate the effectiveness and advantages of BP‐trained neural networks in predicting mechanical properties based on various input parameters. Recommendations are provided on how the prediction model can be applied in the field of additive manufacturing.
30 March 2026 in SSRN Electronic Journal
Aluminum matrix composites (AMCs) hold significant potential as lightweight structural materials for aerospace applications. However, achieving a simultaneous enhancement in both strength and corrosion resistance remains a longstanding challenge. In this work, nano-ZrB2 particle-reinforced AMCs were fabricated via solid-state additive friction stir deposition (AFSD), which enables uniform dispersion of nanoparticles through severe plastic deformation and mechanical stirring at low processing temperatures. With the incorporation of 6 vol% ZrB2, the composite exhibited a 35.62% increase in hardness and a 14.42% improvement in ultimate tensile strength compared to the unreinforced AFSD-processed alloy. The strengthening is attributed to the combined effects of high-hardness ZrB2 nanoparticles and a dual grain refinement mechanism: dynamic recrystallization induced by AFSD leads to fine equiaxed grains, while ZrB2 particles serve as heterogeneous nucleation sites and effectively pin grain boundaries, resulting in further microstructural refinement. More importantly, the 6% ZrB2-reinforced composite demonstrated optimal corrosion resistance, exhibiting a low corrosion current density of 0.29 μA/cm2. This improvement is ascribed to the redistribution of precipitates during the solid-state process: Mg-Si phases preferentially encapsulate ZrB2 particles to form a core-shell structure, while the fraction of cathodic Al-Fe-Si intermetallics is significantly reduced. Such microstructural modifications alleviate electrochemical heterogeneity and suppress micro-galvanic coupling, leading to significantly enhanced corrosion performance. This study provides an effective solid-state additive manufacturing strategy for tailoring microstructures and breaking the conventional strength-corrosion resistance trade-off in AMCs.