23 January 2018 in IEEE Transactions on Antennas and Propagation
This paper represents a low-profile large-scale circular-polarized (CP) plate array antenna in the D-band. To achieve the high gain, high efficiency, and wideband at the same time, a CP 2 × 2 subarray antenna is proposed at first, consisting of integrated horns, complementary phase shifters, and a dual-polarized power divider (PD). The complementary phase shifter includes a parallel capacitance phase shifter and a parallel inductance phase shifter. Phase shifts generated by inductance and capacitance structures present opposite tendencies versus frequency. Therefore, an appropriate combination of them will make the phase shift almost constant over a wideband, which is important to generate a wideband CP beam. Besides, the capacitance phase shifter can be implemented by inserting irises at waveguide broadsides, while the inductance phase shifter can be achieved by inserting irises at the waveguide narrow side. Such a simple configuration can guarantee the element spacing limitation and the fabrication accuracy. The dual-polarized PD consists of an octagon cavity with rotated symmetrical coupling slots for wideband equal-amplitude and in-phase outputs. In addition, some matching layers and matching ridges in the octagon cavity are introduced to achieve wideband matching. Finally, a wideband array feeding network is used to build a 16 × 16-element left-handed CP array antenna. The S 11 below -10 dB bandwidth is about 15.1%, and the co-gain is more than 30 dBi from 130 to 149 GHz. The radiation efficiency is higher than 65% and a 3 dB axial ratio can be satisfied over the whole band.
25 March 2020 in IEEE Transactions on Antennas and Propagation
A wideband air-filled plate array antenna with multistage impedance matching operated in D-band is proposed in this paper. To achieve the wide bandwidth, three stages of impedance matching are introduced in the 2×2 sub-array, including the step-profiled horn element, the step-profiled power divider cavity with two resonant points and a modified E-plane bend transition. The integrated step-profiled horn with simple configuration can realize broadband matching. Wideband T-junctions are combined together to form a corporate feeding network. Essential matching pins are introduced to break through the upper bandwidth restriction of the feeding network. Besides, the square aperture shape of the horn element and the air-filled feeding structure contribute to the high radiation efficiency of the proposed array. To satisfy the fabrication tolerance, the MEMS micromachining technology with a high etching precision is utilized. The experimental results show a wide 1-dB down gain bandwidth of 23.54%. The maximum gain is 33.24 dBi and the peak efficiency is 70.91%.