In the present study, we synthesized a cationic lignosulfonate hydrogel (LS-g-P (AM-co-DAC)) by grafting acrylamide (AM) and acryloxyethyl trimethyl ammonium chloride (DAC) onto sodium lignosulfonate (LS) via free radical copolymerization. The solution pH, contact time, initial concentration, and temperature were comprehensively investigated through the static adsorption method for the adsorption behaviours of Cr(VI) by the hydrogel. The experimental results show that the best conditions were a temperature of 30°C, a dosage of 0.1 g, pH = 3, a concentration of 50 mg / L, and contact time = 2 h with removal efficiencies of above 70% and adsorption capacity of 18.14 mg·g−1. The adsorption process followed the Langmuir isothermal model, indicating monolayer adsorption, and the maximum adsorption capacity was 58.86 mg·g−1. Adsorption kinetics results show that the pseudo-second-order kinetic model dominated the adsorption process, and the adsorption activation energy was 5.489 kJ·mol−1. In addition, the adsorption involved spontaneous exothermic and entropy reduction. The combination of FT-IR, SEM, and XRD was used to characterize the structure and properties of the prepared hydrogel, and the adsorption mechanism was the result of electrostatic attraction, physical and chemical adsorption, and hydrogen bond. The hydrogel has good regenerative properties after desorption. Overall, this work synthesized an environmentally friendly biomass lignin-based hydrogel, which can be used as an adsorbent for the treatment of anionic pollutants, and explored a new method for the high-value utilization of industrial lignin. GRAPHICAL ABSTRACT
A batch experiment was used in studying the effect of acrylic-acid-modified walnut shell (MWNS) as a low-cost adsorbent for removing Rhodamine B (RB) cationic dye in aqueous solutions. The adsorbent dosage, initial dye concentration, contact time, temperature, pH, and supporting electrolyte concentration on the adsorption behaviour of the adsorbent were explored. The adsorbent was characterized using the point of zero charge (pHPZC), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), automatic specific surface analysis (BET), and X-ray photoelectron spectroscopy (XPS). Results showed that MWNS had abundant active groups and rough surface, which is conducive to the adsorption process. The kinetics and equilibrium data of MWNS-to-RB adsorption were in accordance pseudo-second-order kinetic and Freundlich isotherm models, respectively. Under optimal adsorption conditions, the maximum adsorption capacity of RB was 48.87 mg·g−1. Thermodynamic results showed spontaneously and exothermically the adsorption process. Moreover, the addition of electrolyte had a negative effect on equilibrium adsorption capacity and adsorption rate. HIGHLIGHTS GRAPHICAL ABSTRACT
31 March 2025 in Journal of Environmental Chemical Engineering
Chemical oxygen demand (COD) is one of the most commonly used indexes for monitoring water quality. However, the accuracy of the conventional COD test is significantly affected by the high concentration of chloride ion in water samples. In addition, the conventional COD test results in the production of hazardous wastes including mercury and hexavalent chromium. This study proposed the prediction of COD with total organic carbon (TOC) for monitoring high-chloride wastewater by comparing their relationship using simulated wastewaters and actual oilfield wastewaters from two wastewater treatment stations at Xinjiang oilfield, China. The theoretical analysis and experimental results showed that there are significant linear correlations between the COD and TOC in simulated wastewaters and actual oilfield wastewaters. High correlation coefficients (R) of 0.9777 and 0.9710 between COD and TOC were obtained for oilfield wastewaters from Xinjiang 81# and 91# stations, respectively. By using the established conversion models, the COD values in the two groups of mixed oilfield wastewaters from Xinjiang 81# and 91# stations were successfully predicted, with relative errors <±5%. It was demonstrated that the proposed method could be promisingly used as an alternative for the green determination of COD values in high-chloride oilfield wastewaters while eliminating the hazardous wastes and chloride interferences.