30 September 2021 in IEEE Transactions on Wireless Communications
In wireless networks, an essential step for precise range-based localization is the high-resolution estimation of multipath channel delays. The resolution of traditional delay estimation algorithms is inversely proportional to the bandwidth of the training signals used for channel probing. Considering that typical training signals have limited bandwidth, delay estimation using these algorithms often leads to poor localization performance. To mitigate these constraints, we exploit the multiband and carrier frequency switching capabilities of wireless transceivers and propose to acquire channel state information (CSI) in multiple bands spread over a large frequency aperture. The data model of the acquired measurements has a multiple shift-invariance structure, and we use this property to develop a high-resolution delay estimation algorithm. We derive the Cramér-Rao Bound (CRB) for the data model and perform numerical simulations of the algorithm using system parameters of the emerging IEEE 802.11be standard. Simulations show that the algorithm is asymptotically efficient and converges to the CRB. To validate modeling assumptions, we test the algorithm using channel measurements acquired in real indoor scenarios. From these results, it is seen that delays (ranges) estimated from multiband CSI with a total bandwidth of 320 MHz show an average RMSE of less than 0.3 ns (10 cm) in 90% of the cases.
16 November 2022 in Nature
13 January 2020 in IEEE Access
In developing a high accuracy terrestrial radio navigation system, as a complement to a global navigation satellite system (GNSS), it is recognized that the performance of time delay estimation is proportional to, and thereby limited by, the signal bandwidth. Given a possibly narrow signal bandwidth, the central carrier phase can, alternatively, provide a better distance accuracy, though the central carrier phase cycle ambiguity should be resolved. In practice, the carrier phase may be perturbed by multipath. In this paper, considering an orthogonal frequency division multiplexing (OFDM) signal, we propose a two-step carrier phase estimation method to reduce the error introduced by multipath. First, the propagation delay of the LoS path is coarsely determined, then the carrier phase is estimated using the earlier determined coarse time delays. Furthermore, a positioning model only based on carrier phase estimates is presented in this paper. The proposed technique is evaluated by statistical analyses and a simulated OFDM-based terrestrial positioning system in different roadway multipath environments. The results show that the impact of multipath on carrier phase estimation can be largely mitigated, so that the carrier phase can be used for precise positioning. In addition, fixing the integer carrier phase cycle ambiguities can significantly reduce the time for the position solution to converge to high precision.
10 March 2021 in IEEE Transactions on Instrumentation and Measurement
For validation and demonstration of high accuracy ranging and positioning algorithms and systems, a wideband radio signal generation and acquisition testbed, tightly synchronized in time and frequency, is needed. The development of such a testbed requires solutions to several challenges. Tight time and frequency synchronization, derived from a centrally distributed time-frequency reference signal, needs to be maintained in the hardware of the transmitter and receiver nodes, and wideband signal acquisition requires sustainable data throughput between the receiver and host PC as well as data storage at GB level. This article presents a testbed for wideband radio signal acquisition, for validation and demonstration of high accuracy ranging and positioning. It consists of multiple Ettus X310 universal software radio peripherals (USRPs) and supports high accuracy (<; 100 ps) time-deterministic, sustainable signal transmission and acquisition, with a bandwidth up to 320 MHz (in dual channel mode) and frequencies up to 6 GHz. Generation and processing of wideband arbitrary signal waveforms is done offline. To realize these features, radio frequency on chip (RFNoC) compatible HDL units were developed for integration in the X310 SDR platform. Wideband transmission and signal acquisition at a lower duty cycle is applied to reduce the data offloading throughput to the host's personal computer (PC). Benchmarking of the platform was performed to demonstrate sustainable long duration dual channel acquisition. Indoor range measurements with the synchronous operation of the testbed show a decimeter-level accuracy.
17 March 2021 in IEEE Transactions on Vehicular Technology
This paper presents a methodology to design a sparse multiband ranging signal with a large virtual bandwidth, from which time delay and carrier phase are estimated by a low complexity multivariate maximum likelihood (ML) method. In the estimation model for a multipath channel, not all reflected paths are considered, and time delay and carrier phase are estimated in a step-wise manner to further reduce the computational load. By introducing a measure of dependence and a measure of bias for a multipath reflection, we analyse the bias, precision and accuracy of time delay and carrier phase estimation. Since these two indicators are determined by the signal spectrum pattern, they are used to formulate an optimization for signal design. By solving the optimization problem, only a few bands from the available signal spectrum are selected for ranging. Consequently, the designed signal only occupies a small amount of signal spectrum but has a large virtual bandwidth and can thereby still offer a high ranging precision with only a small bias, based on the low-complexity simplified ML method. Numerical and laboratory experiments are carried out to evaluate the ranging performance of the proposed estimation method based on sparsely selected signal bands. Relative positioning, in which we only measure a change in position, based on either the time delay estimates or the carrier phase estimates, is presented as a proof-of-concept for precise positioning. The results show that positioning based on only 7 out of 16 signal bands, sparsely placed in the available spectrum, achieves a decimeter level accuracy when using time delay estimates, and a millimeter level accuracy when using carrier phase estimates. Compared with the case of using all available bands, and without largely decreasing the positioning performance, the computational complexity when using the sparse multiband signal can be reduced by about 80%.