1 February 2025 in Materials Research Express
The objective of this study is to optimize the trade-off between threshold voltage (VTH) and maximum drain current (ID,max) in recessed gate AlGaN/GaN metal insulator semiconductor high electron mobility transistor (MISHEMT) using atomic layer etching (ALE) technology, with technical computer-aided design (TCAD) simulations assisting in the analysis of the underlying mechanisms to demonstrate the high performance and reliability of GaN-based power application. A normally-off recessed gate MISHEMT with varying AlGaN remaining thickness (2 nm, 3 nm, and 5 nm) was fabricated using the ALE process, ensuring precise etch depth and minimal surface damage. The device with a 5 nm AlGaN remaining thickness exhibited excellent performance, with an ID,max current of 347 mA mm−1, a VTH of +2.6 V, and a breakdown voltage (BV) of 830 V, compared to the AlGaN barrier with remaining thicknesses of 3 nm and 2 nm, which only reached 120 V and 75 V, respectively. The different recessed gate AlGaN remaining electric field distribution results were verified according to TCAD simulations. This is attributed to the hot electrons effect under the action of the high electric field to promote electrons to overcome potential energy barriers that are injected into a buffer, barrier, or insulating layers and trapped there, degrading off-state BV capability.
27 June 2024 in Semiconductor Science and Technology
This study investigates the effect of O2 plasma treatment on the physical and electrical properties of the surface region in Schottky-gate AlGaN/GaN high electron mobility transistor (HEMT). We demonstrate that O2 plasma treatment significantly reduces the gate leakage current and enhances the on/off ratio by three orders of magnitude compared to devices without treatment. The O2 plasma treatment removes organic chemical residue and forms Ga–O bonds on the AlGaN surface beneath the gate metal. X-ray photoelectron spectroscopy results indicate that the treatment effectively forms a Ga–O compound oxide layer, which provides surface passivation. Furthermore, atomic force microscope analysis reveals a 50% reduction in surface roughness after the O2 plasma treatment. Using O2 plasma oxidation treatment caused a shift in the threshold voltage (VTH
) of Schottky-gate AlGaN/GaN HEMT. Initially measured at −5.26 V, the VTH
value shifted to +0.5 V. Furthermore, we also employ TCAD simulation to assist in the process developed during the manufacturing process. It is worth noting that the drain current decreases as the Ga–O compound oxide layer increases. This is due to effectively depleted the polarization charges at the AlGaN/GaN interfaces during E-mode operation when reducing the thickness of the AlGaN layer beneath the gate metal. Our results demonstrate the importance of O2 plasma surface treatment in achieving optimal device performance. This study systematically discusses the effect of O2 plasma on AlGaN/GaN surface properties and the formation of Ga–O bonding. It offers insights into developing high-performance Schottky-gate AlGaN/GaN HEMT.