19 March 2022 in Journal of Nuclear Materials
29 August 2023 in Nuclear Materials and Energy
1 January 2016 in Letters on Materials
A novel two-phase titanium alloy based on VT8 having the composition VT8-20Zr-0.1B (Ti-6.5Al-3.3Mo-0.3Si) (wt. %) has been considered in the present paper. It has been established that modifying with boron leads to refinement of prior β grains and α/β colonies by a factor of about ten and alloying with zirconium results in some additional colony refinement. Alloying with 20 wt. % of zirconium leads to decreasing the α+β→β transformation temperature by about 100°C that along with refinement of the as-cast structure improved the hot workability of the alloy. After multidirectional hot forging in the α+β phase field (Т = 800°С) and hardening heat treatment the strength of the ВТ8-20Zr-0.1B alloy at 20-500°C was found to be higher by 30-40% as compared with that of the VT8 alloy after the same treatment while retaining similar ductility of the alloys. This allows one to characterize the VT8-20Zr-0.1B alloy as an ultrastrong titanium alloy. For the VT8-20Zr-0.1B alloy the following tensile properties have been attained: σUTS = 1560 MPa and δ = 4% at room temperature, σUTS = 1230 MPa and δ = 14% at Т = 500°С. The specific strength reached at Т=500°С (σUTS/ρ ≈ 248 MPa/g×cm-3) is the highest even obtained at this temperature for currently known titanium alloys. It was revealed that water quenching from the β phase field led to the martensitic β→α″ transformation with retained β phase and subsequent ageing resulted in formation of ultrafine lamellar structure with a nanosized lamellae thickness that promoted achieving significant strengthening.