This paper evaluates the electromagnetic characteristics as to two types of superconducting motors: one is the superconducting motors adopting high-temperature superconducting field coils and copper armature windings; and the other is fully-superconducting motors, which have high-temperature superconducting field coils and MgB2 superconducting armature windings. Analytical formulas and FEM are employed for the designs of 1.5-, 3.0-, and 5.0-MW motors. We consider how to reduce ac loss in MgB2 winding structure as well. The analysis of our results, which was conducted mainly over output density and efficiency, suggests that the adoption of superconducting motors is more realistic in realizing electrical aircraft propulsion system in terms of higher output; the analysis results show that the fully-superconducting motors have a potential to reach over 16 kw/kg.
28 February 2019 in IEEE Transactions on Applied Superconductivity
This paper describes and discusses fully superconduct-ing motors (FSCMs) for electrical aircraft propulsion systems. The FSCM structures have a potential to reach over 20 kW/kg thanks to air cored structure and higher current density coils while perma-nent magnet synchronous motors reached 5 kW/kg. We designed 3 and 5 MW FSCMs with YBCO field coils and $\rm MgB_2$ armature wind-ings. The FSCM output density is aiming to achieve over 20 kW/kg. To satisfy the output density, we considered back iron thickness and magnetic flux leakage with FEM. The design results show that an output density of the 3 and 5 MW motors reached 19.4 kW/kg and 25.2 kW/kg, respectively. Also, magnetic flux leakage at a distance of almost 100 mm from the motors was on the order of tens of mT.
We present our design and development of a polarization modulator unit (PMU) for LiteBIRD space mission. LiteBIRD is a next generation cosmic microwave background (CMB) polarization satellite to measure the primordial B-mode. The science goal of LiteBIRD is to measure the tensor-to-scalar ratio with the sensitivity of δr < 10-3. The baseline design of LiteBIRD is to employ the PMU based on a continuous rotating half-wave plate (HWP) at a telescope aperture with a diameter of 400 mm. It is an essential for LiteBIRD to achieve the science goal because it significantly reduces detector noise and systematic uncertainties. The LiteBIRD PMU consists of a multi-layered sapphire as a broadband achromatic HWP and a mechanism to continuously rotate it at 88 rpm. The whole system is maintained at below 10K to minimize the thermal emission from the HWP. In this paper, we discuss the current development status of the broadband achromatic HWP and the cryogenic rotation mechanism.
30 November 2020 in IEEE Transactions on Applied Superconductivity
This paper evaluates the novel design approach of a 3 MW partially superconducting synchronous machine for electric aircraft propulsion. Its special feature is the application of an electromagnetic Halbach array for the field excitation to reduce the back yoke weight and thereby increase overall output power density. The electromagnetic Halbach array is obtained by reproducing a permanent magnet Halbach array with high-temperature superconducting coils. The arrangement is further optimized, and its field characteristics are compared to a conventional superconducting field winding design. Even though the Halbach array has a higher space and superconductor consumption, it shows better characteristics concerning the intensity of inside and outside magnetic field. Applied in a superconducting motor, the Halbach array field winding achieves a back yoke thickness reduction of up to 85% and a back yoke weight reduction of up to 78% compared to reference models. The gravimetric power density is increased by up to 30% at the expense of volumetric power density. In exchange for a back yoke weight reduction, other components, such as field winding and cryostat, become heavier.
13 February 2019 in IEEE Transactions on Applied Superconductivity
This paper deals with electromagnetic design of inte-rior permanent magnet-type synchronous motors (IPMSMs) using bulk superconductors. Three kinds of IPMSMs with different bulk superconductor arrangements in the rotor were considered. IP-MSMs using permanent magnets were also designed. The evaluation of the IPMSM characteristics: magnet torque, reluctance torque, magnetic flux density and losses at room temperature are presented. Also, the torque-to-magnetic bulk/PM-volume ratio for all concep-tual designs are evaluated. The results show that the superconduct-ing IPMSM can obtain over 490 kNm/m $^3$ against 300 kNm/m $^3$ of conventional IPMSMs.