The extended focal depth of Bessel beams is a very attracting property for glass cutting applications. However, Bessel beam generation with a non-ideal conical lens induces beam pattern distortions. We present our novel results on bulk modifications of soda-lime glass using a non-ideal axicon-generated Bessel beam. Modelling of the Bessel beam pattern and experimental measurements indicated ellipticity of the central core diameter. That resulted in the formation of cracks in a transverse direction inside the bulk of glass. Furthermore, we demonstrate the possibility to control the transverse crack propagation direction, which is crucial in the case of glass cutting applications.
14 September 2020 in Physical Review Accelerators and Beams
We report on the stable and continuous operation of a kilohertz laser-plasma accelerator. Electron bunches with 2.6 pC charge and 2.5 MeV peak energy were generated via injection and trapping in a downward plasma density ramp. This density transition was produced in a specially designed asymmetrically shocked gas jet. The reproducibility of the electron source was also assessed over a period of a week and found to be satisfactory with similar values of the beam charge and energy. Particle in cell simulations confirm the role of the shock and the density transition in the electron injection mechanism. These results show that the reproducibility and stability of the laser-plasma accelerator are greatly enhanced on the long-term scale when using a robust scheme for density gradient injection.
It is known that Bessel beam generation with a non-ideal axicon induces beam pattern distortions. In this paper, we introduce a simple method for non-ideal axicon-generated Bessel beam reconstruction by tilting the axicon perpendicular to its optical axis. We found an optimum axicon tilt angle where beam distortions can be compensated by inducing additional astigmatic aberrations. At optimal tilt angle, the central spot symmetry and focal depth was increased. By this method we could control crack formation symmetry in the bulk of glass, which is essential for many transparent material processing applications.
With the development of industrial lasers and novel glass processing techniques, which offer high speed, quality and precision, this becomes an attractive alternative to conventional methods, such as mechanical scribing and cleaving, diamond saw and waterjet cutting, commonly used in the industry. However, the emerging techniques lack thorough validation with respect to well-established methods. To this end, we present a detailed comparison of different glass cutting methods, taking into account surface quality, side-wall roughness, residual stresses and flexural strength. In addition, samples were examined after fracture, and the flexural strength was estimated according to the quarter elliptical corner flaws, which were the main reason of glass failure. Two laser glass processing techniques were investigated – the rear-side glass processing with tightly focused nanosecond laser pulses and sub-nanosecond laser volumetric scribing with asymmetrical Bessel beam. Results were compared to mechanical scribing and breaking, diamond saw and waterjet cutting.
Laser-based fabrication can be an alternative technology to mechanical grinding and polishing processes. However, the performance of these elements in real applications still needs to be validated. In this paper, we demonstrate that the subtractive fabrication technology is able to produce high-quality axicons from fused silica, which can be efficiently used for glass processing. We comprehensively investigate axicons, fabricated by ultrashort pulsed laser ablation with subsequent CO2 laser polishing, and compare their performance with commercially available axicons. We show that laser-fabricated axicons are comparable in quality with a precision commercial axicon. Furthermore, we demonstrate the intra-volume glass modification and dicing, utilising mJ-level laser pulses. We show that the tilting operation of the laser-fabricated axicons results in the formation of directional transverse cracks, which significantly enhance the 1 mm-thick glass dicing process.