1 February 2022 in Petroleum Chemistry
Three kinds of organic components, namely, entrapped oil and reversibly and irreversibly adsorbed on finely dispersed mechanical impurities oils, are identified in the oily sludge obtained by centrifugation of the extracted crude oil from the Abdrakhmanovo area of the Romashkino field. The entrapped oil (about 4 vol %) is enriched in resins and depleted of hydrocarbon components with increased fraction of low-molecular-mass n-alkanes. The content of reversibly adsorbed oil does not exceed 5 wt %. It contains ester fragments and increased fraction of high-molecular-mass alkanes; also, it is enriched in polar resins and “soft” asphaltenes. The content of irreversibly adsorbed oil is approximately 3 wt %. According to the thermal analysis data, irreversibly adsorbed oil consist mainly of weakly carbonized structures whose thermal oxidative degradation occurs at temperatures of up to 300°С. Relatively high content of hydrocarbons, including n-alkanes up to C24, in the entrapped oil makes oily sludge promising for the production of a wide range of oil products.
1 January 2023 in Petroleum Chemistry
The paper describes a comparative assessment of viscosity–temperature curves for a number of model mixtures prepared from crude oil maltenes isolated from unstable oils (with island-type asphaltenes) and stable oils (with archipelago-type asphaltenes) with the addition of 5 wt % of individual n-alkanes (C10 or C23) and/or asphaltenes (native or foreign). All the viscosity–temperature curves consist of two distinct regions, namely a low-temperature region (10–30°C) and a high-temperature region (30–50°C), within which the behavior of oil systems is governed by the presence of solid paraffin crystals and the aggregation state of asphaltenes, respectively. It is assumed that, at high temperatures, the most critical factors responsible for the viscosity–temperature properties of oil systems are the asphaltene structural type (island or archipelago) and the propensity of the asphaltenes to flocculation or paraffin–asphaltene aggregation. It is further demonstrated that the flocculation of asphaltenes is accompanied by the entrapment of n-alkanes contained in the dispersion medium, and that the amounts trapped by island-type asphaltenes are higher.
14 February 2025 in Journal of Thermal Analysis and Calorimetry
1 May 2024 in Petroleum Chemistry
The instability of asphaltenes in crude oils, manifested in their precipitation, is a major production issue that may arise both during the recovery and processing of petroleum feedstocks. The purpose of this study was to investigate the molecular structure of asphaltenes in order to shed light on the causes of their precipitation. To this end, the molecular structures of stable (remaining in the solution) and unstable (precipitated) asphaltenes were characterized by EPR, NMR, and IR spectroscopy. Using crude oil asphaltenes and air-blown asphalt as objects for the study, only weak increasing and decreasing trends were observed in the content of aromatics and oxygenates, respectively, in the unstable asphaltene fraction. The stable and unstable asphaltenes were found to differ in adsorption capacity. It was shown that the species adsorbed on asphaltenes are rich in moieties of aromatic acid esters, and that removing these species further eliminates the structural-group composition differences between stable and unstable asphaltenes. The study findings suggest that the stability of asphaltenes in crude oils can be controlled by introducing synthetic aromatic acid esters structurally similar to natural surfactants.
1 April 2023 in Petroleum Chemistry
ESR spectra of asphaltenes from a series of crude oils from the Devonian and Carboniferous deposits of the South-Tatar Dome in Tatarstan with low vanadium content and of vanadiferous crude oils from deposits of the Melekess depression in Tatarstan are analyzed. For asphaltenes from Devonian oils, the correlation between the concentrations of stable free radicals (SFR) and vanadyl complexes (VCs) has direct trend, whereas for asphaltenes from Carboniferous oils the trend is inverse. Taking into account the previously revealed inverse trend for asphaltenes of vanadium-enriched highly viscous crude oils [1], the opposite trends in SFR–VC correlations (direct and inverse) suggest different structures of asphaltene molecules in oils with different vanadium content and, correspondingly, different sources and conditions of the formation of oil deposits. Specific features of the ESR characteristics of asphaltenes of core and extractable oils and of oils from Devonian and Carboniferous deposits are revealed.
1 June 2025 in Petroleum Chemistry
The conditions of the formation of stable water–petroleum emulsions stabilized by clay particles were studied. The effect of unmodified and modified montmorillonite on the emulsion stabilization was studied for model systems consisting of pure toluene and distilled water. The clay particles were modified with resin–asphaltene components of the crude oil from the Romashkino oilfield. The influence exerted by the degree of modification and concentration of clay particles on the stability of water–petroleum emulsions was revealed. The degree of modification was estimated from the IR spectra. The resin–asphaltene components modify the surface of clay particles. The degree of modification increases with an increase in the modification time and concentration of petroleum components. Stable emulsion samples were obtained with modified clay particles. The toluene phase in these emulsions is stabilized by clay microparticles, which is characteristic of Pickering emulsions.