1 May 2008 in Physics of Plasmas
Extreme ultraviolet (EUV) radiation from laser-produced plasma (LPP) has been thoroughly studied for application in mass production of next-generation semiconductor devices. One critical issue for the realization of an LPP-EUV light source for lithography is the conversion efficiency (CE) from incident laser power to EUV radiation of 13.5-nm wavelength (within 2% bandwidth). Another issue is solving the problem of damage caused when debris reaches an EUV collecting mirror. Here, we present an improved power balance model, which can be used for the optimization of laser and target conditions to obtain high CE. An integrated numerical simulation code has been developed for the target design. The code agrees well with experimental results not only for CE but also for detailed EUV spectral structure. We propose a two-pulse irradiation scheme for high CE, and reduced ion debris using a carbon dioxide laser and a droplet or a punch-out target. Using our benchmarked numerical simulation code, we find a possibility to obtain CE up to 6–7%, which is more than twice that achieved to date. We discuss the reduction of ion energy within the two-pulse irradiation scheme. The mitigation of energetic ions by a magnetic field is also discussed, and we conclude that no serious instability occurs due to large ion gyroradius.
13 April 2010 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
A theoretical framework to study linear and nonlinear Richtmyer–Meshkov instability (RMI) is presented. This instability typically develops when an incident shock crosses a corrugated material interface separating two fluids with different thermodynamic properties. Because the contact surface is rippled, the transmitted and reflected wavefronts are also corrugated, and some circulation is generated at the material boundary. The velocity circulation is progressively modified by the sound wave field radiated by the wavefronts, and ripple growth at the contact surface reaches a constant asymptotic normal velocity when the shocks/rarefactions are distant enough. The instability growth is driven by two effects: an initial deposition of velocity circulation at the material interface by the corrugated shock fronts and its subsequent variation in time due to the sonic field of pressure perturbations radiated by the deformed shocks. First, an exact analytical model to determine the asymptotic linear growth rate is presented and its dependence on the governing parameters is briefly discussed. Instabilities referred to as RM-like, driven by localized non-uniform vorticity, also exist; they are either initially deposited or supplied by external sources. Ablative RMI and its stabilization mechanisms are discussed as an example. When the ripple amplitude increases and becomes comparable to the perturbation wavelength, the instability enters the nonlinear phase and the perturbation velocity starts to decrease. An analytical model to describe this second stage of instability evolution is presented within the limit of incompressible and irrotational fluids, based on the dynamics of the contact surface circulation. RMI in solids and liquids is also presented via molecular dynamics simulations for planar and cylindrical geometries, where we show the generation of vorticity even in viscid materials.
11 March 2003 in Physical Review E
The linear theory of the Richtmyer-Meshkov instability derived by Wouchuk and Nishihara [Phys. Plasmas 4, 3761 (1997)] indicates that the instability is driven by the nonuniform velocity shear left by transmitted and reflected rippled shocks at a corrugated interface. In this work, the nonlinear evolution of the interface has been investigated as a self-interaction of a nonuniform vortex sheet with a density jump. The theory developed shows the importance of the finite density jump and the finite initial corrugation amplitude of the interface. By introducing Lagrangian markers on the interface with proper kinematic boundary conditions, it is shown that stretching and shrinking of the interface occur locally even in the tangential direction. This causes deformation of bubble and spike profiles depending on the Atwood number. The vorticity on the interface for a finite density jump is not conserved in the nonlinear regime. Our results suggest that the spiral structure of the spike is due to local increase and decrease of the vorticity on the interface. Nonlinear analysis shows that the large initial amplitude of the corrugation results in rapid increase of the vorticity, which may also explain the fast roll up motion of the spiral for large amplitudes. With the use of the asymptotic linear growth rate, the nonlinear evolution of the instability is uniquely determined from the initial corrugation amplitude of the interface, the Atwood number, and the incident shock intensity. There is no need to use an impulsive formulation. The analytical nonlinear growth agrees well with the experiment [Dimonte et al., Phys. Plasmas 3, 614 (1996)]. The theory reveals nonlinear properties of the instability, such as the time evolution of the interface profiles and the vorticity on the interface, and also their dependence on the Atwood number and the corrugation amplitude.
15 August 2002 in The Journal of Chemical Physics
Coulomb explosions of benzene induced by an intense femtosecond laser field were investigated by time-of-flight (TOF) mass spectrometry at a laser intensity of with a pulse width of 120 fs. The multiply charged ions of and were detected, and their energies were found to be distributed in the range of 0–160 eV. The explosions were concluded to be anisotropic because the kinetic energies of multiply charged carbon ions are highly parallel to the laser electric field. Molecular dynamics simulations, including the effects of tunnel ionization, electron recombination, and the spatial configuration of benzene for laser electric fields, were performed to elucidate the kinetic-energy distributions and the dynamics of exploded benzene ions. The results of the simulations reproduced the essential points of observation concerning the energies and distributions of the ions in the TOF experiments. The simulations suggest that the charge-hopping processes enhance ionization, finally leading to an anisotropic explosion, which events are similar to those found in the case of explosions. Furthermore, our findings have strongly suggested that time evolution of the hopping greatly depends on spatial configuration in the case of planar molecule benzene.
9 December 2004 in Applied Physics Letters
Extreme ultraviolet (EUV) emission from Xe plasma in the band is theoretically investigated for lithographic application. It appears that a large number of satellite lines due to the , , and transitions significantly contribute to the emission over the spectral range from . At electron densities above , laser-produced Xe plasmas attain quasilocal thermodynamic equilibrium (LTE) in order to make the emission intensity in the band comparable to that in the band.
13 November 2023 in Applied Physics Letters
We present the results of joint measurements of electron density (ne), temperature (Te), and emission spectra of an Nd:YAG-driven tin plasma. Collective Thomson scattering provides space- and time-resolved ne and Te data during drive laser irradiation, and extreme ultraviolet (EUV) emission spectra, which is space-resolved in the target normal, are measured using a flat-field grazing incidence spectrometer (GIS). As the distance from the target increased, the emission intensity quickly decreases, and the peaks of the spectra gradually shift to longer wavelengths. This can be explained by the rapid decrease in ne, and thus, self-absorption, with an increase in distance. We obtain the EUV spectra by calculating the transfer of photons along the line-of-sight of the GIS, using theoretical emissivity and opacity, and applying the measured spatial distribution of ne and Te. The results quantitatively demonstrate that the self-absorption effect is significant; the emission from the core regions is mostly reabsorbed by the surrounding plasma. The calculated spectra are compared with the measured spectra. While good agreement is achieved in the spectral region of 13.3 and 15.3 nm, considerable differences are found in the 12.5–13 and 15.5–17.5 nm region. The results demonstrate the significance of this joint measurement for further validation of the atomic process model considering self-absorption effect, which is critical for the future high-density, solid laser-driven EUV source.