3 November 2017 in Vehicle System Dynamics
The finite length nature of rail-pad supports is characterised by a Timoshenko beam element formulation over an elastic foundation, giving rise to the distributed support element. The new element is integrated into a vertical track model, which is solved in frequency and time domain. The developed formulation is obtained by solving the governing equations of a Timoshenko beam for this particular case. The interaction between sleeper and rail via the elastic connection is considered in an analytical, compact and efficient way. The modelling technique results in realistic amplitudes of the ‘pinned–pinned’ vibration mode and, additionally, it leads to a smooth evolution of the contact force temporal response and to reduced amplitudes of the rail vertical oscillation, as compared to the results from concentrated support models. Simulations are performed for both parametric and sinusoidal roughness excitation. The model of support proposed here is compared with a previous finite length model developed by other authors, coming to the conclusion that the proposed model gives accurate results at a reduced computational cost.
4 May 2022 in Polymer Testing
8 February 2022 in Mechanism and Machine Theory
3 September 2018 in Vehicle System Dynamics
A vertical track model suitable for the study of the dynamic response and the interaction between wheel and rail in the time domain is developed by using Timoshenko beam elements, and its performance is optimised by accounting for the local deflection of these type of elements. Implementation of the local system enables one to obtain an accurate description of the contact force in a more computationally efficient way than other numerical methods, and it leads to an almost total elimination of the discontinuities caused by the local displacement underestimation and the shear incompatibilities introduced by the conventional formulation with Timoshenko beam elements. The work presented here describes both static and dynamic approaches of the local system directly obtained through the resolution of the beam governing equations. The dynamic approach guarantees the shear rotation continuity and describes accurately the track frequency content. The method is tested for parametric excitation, in which it ensures the smoothness of the response. Secondly, it is tested for short-pitch corrugated rails, where overestimation of the contact force is avoided with a reduced model size when compared with conventional Timoshenko element formulation. The results are validated by comparison with those from previous studies.
29 May 2023 in Wind Energy
This work develops an optimization algorithm for the definition of gear microgeometry modifications (MGM) on a gearbox belonging to an offshore 10‐MW wind turbine. Subsequently, the impact of the gear microgeometry on the performance of gears and bearings is quantified: First, under rated load conditions and, second, accounting for the environmental conditions to estimate the long‐term damage. To fulfil this task, a high‐fidelity numerical model of the drivetrain is used, which meets the design requirements of the Technical University of Denmark (DTU) 10‐MW reference offshore wind turbine. The optimization achieves a uniform distribution of the contact stress along the tooth flank, shifts its maximum value to the central position, and eliminates edge contact. These enhancements increase the gear safety factors. Nevertheless, the most significant improvement concerns planetary bearings, for which optimum gear MGM achieve a homogeneous share of the load among bearings. Moreover, deviations of the microgeometry with respect to the defined optimum are also addressed. In gears, lead slope deviations are counteracted by crowning modifications to restrain the increase of the load offset. Concerning planetary bearings, slope deviations can be beneficial or detrimental depending on whether they overload downwind or upwind planetary bearings, respectively. Finally, accumulated damage to planetary bearings after 20 years of service is assessed. Before MGM, results predict a premature failure of planetary bearings, while optimum MGM extend their predicted life above 20 years by achieving a reduction of the maximum accumulated fatigue damage by a factor of 4.4.
23 February 2021 in Vehicle System Dynamics
Rail accelerations can be used on the defect detection and health monitoring of railway vehicle and track components; therefore, mathematical models that predict this response are of interest for reproducing its behaviour in a wide range of situations. The numerical track models based on the Timoshenko beam theory introduce a non-physical response, which is especially noticeable in the rail accelerations. It is due to the lack of dynamic convergence of the Timoshenko finite element (FE). This paper addresses this phenomenon employing an enhanced formulation of the Timoshenko FE that includes internal degrees of freedom (iDoF). The iDoF shape functions are derived from the Timoshenko beam dynamic governing equations. Firstly, the formulation is presented, and its performance is compared with a similar Timoshenko FE formulation. Secondly, the proposal is assessed in the dynamic modelling of railway track structures. The use of iDoF efficiently corrects the non-physical response of rail accelerations by improving the FE dynamic convergence. Subsequently, a filtering criterion for accelerations is proposed, which removes the remaining non-physical response while guaranteeing the conservation of coherent frequency content. Finally, practical cases are simulated for which the proposed methodology is proved to be more efficient and reliable than the standard approach.